I have a lot of knives at this point, and the one I carry everyday (I usually carry 2 or 3), is my serrated Delica in K390. Now that it's been discontinued, I ordered 2 more for backups.
Just got two k390 spidercos in today:) very excited. I’m in ks also, work blue collar, my knives get used regularly and earn their keep. I’ve found it difficult to keep m4 flawless so I’m considering having these k390 knives ceramic coated. Especially for what I paid for the lil temperance 3… whew
Short answer, if you really use k390, it will corrode. my blade has turned black with corrosion, but it works fine, holds an edge. if you work outside, especially in humid or salty environments, it will tarnish BIGTIME.
@@FreedomFox1 it's not practical to oil my knife while working. Dancing around the fact that k390 is a tarnish magnet is silly. If you use it, the blade will be black in 6 months. I just sharpen it and it continues to perform great however!
@@jaystrongbow9435 I haven’t had that experience, just oil it up at the end of the day (even then, only if it gets used a lot). But I could see it being an issue if you get something like food stuck to the blade.
I oil mine regularly (Endura 4,Wharnecliffe blade, K390). Terrific knife, love it. Have one with VG10 also; like the K390 better. Will the blade put with corrosion? I don't mind it turning color or tarnishing or whatever, just don't want pitting.
Love the Delica. Have it in K390, M390, Cru-Wear, SG2, and of course VG10. Take a historically great knife in the Delica and give it a finger choil and G10 scales. Bamn, that would breathe life into an whole next generation of Delicas.
@@Abby_Normal_1969 the Para 3 is close to a G10 Delica, it's just a bit thicker and doesn't have a back lock. And the Stretch 2 is a Paramilitary 2 Lightweight with a back lock. I like this mixing and matching that Spyderco does with materials and locking mechanisms. The Manix 1 originally had a back lock. The Sage 3 had a ball bearing lock, it was like a mini Manix 2, now the Sage 5 has a compression lock. Just amazing.
At 10:18, I am quite confident that those two black spots on the blade and the one tiny spot on the edge were caused by corrosion. They may not have been deep enough to be called pits, but they resulted from corrosion. That's why you had a hard time removing them in the video.
I love k390 steel. I have a Spyderco stretch 2 in k390. Have had it about a year. Still hair shaving sharp. At the time i had a hard time choosing between the delica/endela/endura k390 vs the stretch 2 k390. Ultimately i chose the stretch 2 because of the finger choil- which i use majority of the time when gripping the knife. I like the size of the delica and i probably would have chosen the delica over the stretch 2 if it had a finger choil. I like k390 so much, i just ordered a dragonfly 2 wharncliffe blade in k390.cant wait
I picked up on of these like a month or so ago and I’m so glad I did! K390 is a beast of course but I was really surprised on how much I’ve connected with my delica! It’s actually fun to play with even tho it’s a back lock and after I put a mxg deep carry clip on it, it carries great!
This is the only k390 seki city model I haven’t picked up yet....the k390 dragonfly, endela and endura are all *fantastic* knives. It’s difficult to overstate their beauty, both functionally and ergonomically. My favorite Spyderco will probably always be the crucarta Shaman. It’s just got too much going for it...it’s my perfect pocket knife. But these aren’t far off. Dress up that Endura with a nice set of micarta scales and the Shaman will be getting a serious run for its money....
Thanks for the detailed video. I've had a VG10 Dragonfly 2 for years and I've been looking for an upgraded Delica to justify trying that design. I'm pretty sure this is it.
I’m gonna try to pick up 🆙 ne of the discontinued warnies n give it the lynch nw scale upgrade.. in a high humidity area though, so will need to make sure I oil it
Just got the Lil Temperance 3 LW!!! Super robust, sort or Shaman blade cut out to Spear point. Really feel confident as user, and supposed to self defense in mind in design. This is a rare time I like it in the Spyderco frn. Seki City colorway, style. Please, head to head to Maxamet vs K390, MC?!!
😅 Me buying all the OLD favorites in nearly 2025 for the most possible money... I was a "good boy" for like 6 months before the Black Friday/Christmas sales. In 2020 I was spending all my expendable income on electric guitars, amplifiers and like 30 guitar pedals. What can I say, I like expensive things. 😂
Just a warning to anybody taking this knife apart (I did it) you need 3 hands to put it back together. I had to use my teeth to put the screw back in that goes through the back lock spring back while using my hands to hold the tension down.
Assemble the knife but leave the back lock pin out, close the blade up, push the back lock down onto the spring and simultaneously push the pin through until the back lock hole meets up with the pin and it pops through. Takes about 20-30 seconds, no more. Simple.
whats your thought between k390 and maxament. is k390 a better all purpose steel. i guess we are always looking for that one knife that last forever. i have the para 3 in max as well but its just too small of a knife. i have the itch to buy another knife.
K390 has better toughness but it won't hold an edge as long. I have a keychain Ladybug in K390 and my Para 3 is in Maxamet. Both are monsters. I can't tell the difference during daily general use
@@metal_complex thank you. I gues at that point the knife style becomes more of a factor since they both exceeded my cutting uses. I have the para 3 in max as I said but I really like the endura handle length. 1st world problems I guess.
@@cameronbottoms1118 think I'm going m390. I want a pm2 or pm3 in k390 and maxamet. The delica would be an every day carry like my spy27 pm3 lw and I live in Texas by the river. So humidity stays above 80% most of the year 😫
great video, like always. I was considering buying this knife and yours is one of the most detailed reviews i could find; I already havea vg10 delica and was considering upgrading it to a zdp189 or a k390 version or change platform and buy a para 3 lightweight. having you held all of these knives, which one do you suggest me picking up? thank you for your time and keep up the great videos!
Why haven't we seen any coated K390? Especially from Spyderco, I would've thought they'd have released some DLC K390 or DLC Maxamet by now, so we can get all the awesomeness of these steels without worrying about the corrosion so much. And I don't seem to see anyone else talking about it. Why is that?? :o)
K390 has a higher carbon content it will hold an edge longer. Maxamet has more chromium content making it more corrosion resistant. Great video though!
3yrs later, and mine is still in my pocket. K390 is da bomb.
It's a great knife and steel, I've been using the K390 Delica every day for 3+ weeks, it's still sharp.
I have a lot of knives at this point, and the one I carry everyday (I usually carry 2 or 3), is my serrated Delica in K390. Now that it's been discontinued, I ordered 2 more for backups.
Dragonfly 2 wc K390 is also an amazing little guy. It is soooo sharp. I think I'm gonna check out the Delica next. You sold me man. Thanx
One thing I've learned with my Delica is that its not a knife to fidget with. Open it use it and put it away lol. I grabbed the DLT cpm20cv exclusive.
Just got two k390 spidercos in today:) very excited.
I’m in ks also, work blue collar, my knives get used regularly and earn their keep. I’ve found it difficult to keep m4 flawless so I’m considering having these k390 knives ceramic coated. Especially for what I paid for the lil temperance 3… whew
Short answer, if you really use k390, it will corrode. my blade has turned black with corrosion, but it works fine, holds an edge. if you work outside, especially in humid or salty environments, it will tarnish BIGTIME.
Do you oil it? Mineral oil should prevent corrosion.
@@FreedomFox1 it's not practical to oil my knife while working. Dancing around the fact that k390 is a tarnish magnet is silly. If you use it, the blade will be black in 6 months. I just sharpen it and it continues to perform great however!
@@jaystrongbow9435 I haven’t had that experience, just oil it up at the end of the day (even then, only if it gets used a lot). But I could see it being an issue if you get something like food stuck to the blade.
I oil mine regularly (Endura 4,Wharnecliffe blade, K390). Terrific knife, love it. Have one with VG10 also; like the K390 better.
Will the blade put with corrosion? I don't mind it turning color or tarnishing or whatever, just don't want pitting.
Never understood why they don't take the finger choil from the Stretch and incorporate it into this and the Endura/Endela.
The Stretch 2 in K390 = pure magic
I’ve been using my knife for 6 years now and its still sharp and never had to sharpen it but one time like a year ago. Get it
Love the Delica. Have it in K390, M390, Cru-Wear, SG2, and of course VG10. Take a historically great knife in the Delica and give it a finger choil and G10 scales. Bamn, that would breathe life into an whole next generation of Delicas.
There is a g10 version
@@michael6402 - yeah. I have seen acrylic and steel versions, but damn they are expensive for a VG10 blade.
@@Abby_Normal_1969 the Para 3 is close to a G10 Delica, it's just a bit thicker and doesn't have a back lock. And the Stretch 2 is a Paramilitary 2 Lightweight with a back lock. I like this mixing and matching that Spyderco does with materials and locking mechanisms. The Manix 1 originally had a back lock. The Sage 3 had a ball bearing lock, it was like a mini Manix 2, now the Sage 5 has a compression lock. Just amazing.
At 10:18, I am quite confident that those two black spots on the blade and the one tiny spot on the edge were caused by corrosion. They may not have been deep enough to be called pits, but they resulted from corrosion. That's why you had a hard time removing them in the video.
I love k390 steel.
I have a Spyderco stretch 2 in k390. Have had it about a year. Still hair shaving sharp.
At the time i had a hard time choosing between the delica/endela/endura k390 vs the stretch 2 k390. Ultimately i chose the stretch 2 because of the finger choil- which i use majority of the time when gripping the knife.
I like the size of the delica and i probably would have chosen the delica over the stretch 2 if it had a finger choil.
I like k390 so much, i just ordered a dragonfly 2 wharncliffe blade in k390.cant wait
Just ordered the delica 4 in k390
I picked up on of these like a month or so ago and I’m so glad I did! K390 is a beast of course but I was really surprised on how much I’ve connected with my delica! It’s actually fun to play with even tho it’s a back lock and after I put a mxg deep carry clip on it, it carries great!
Delica is the best pocket knife in the world imo
This is the only k390 seki city model I haven’t picked up yet....the k390 dragonfly, endela and endura are all *fantastic* knives. It’s difficult to overstate their beauty, both functionally and ergonomically. My favorite Spyderco will probably always be the crucarta Shaman. It’s just got too much going for it...it’s my perfect pocket knife. But these aren’t far off. Dress up that Endura with a nice set of micarta scales and the Shaman will be getting a serious run for its money....
I got this knife, in K390, and love it.
Thanks for the detailed video. I've had a VG10 Dragonfly 2 for years and I've been looking for an upgraded Delica to justify trying that design. I'm pretty sure this is it.
I have the wharncliffe version in this steel and like it a lot.
I’m gonna try to pick up 🆙 ne of the discontinued warnies n give it the lynch nw scale upgrade.. in a high humidity area though, so will need to make sure I oil it
The k390 dragonfly hasn't left my back left pocket since the day I got it in octoberish and it's about as sharp as it was then.
Stands to reason if it’s been in your pocket the whole time.
Waiting for the Endela in K390, enjoying my Chaparral in the meantime 😄. Spyderco for life 💪🤘
Just got the Lil Temperance 3 LW!!! Super robust, sort or Shaman blade cut out to Spear point. Really feel confident as user, and supposed to self defense in mind in design. This is a rare time I like it in the Spyderco frn. Seki City colorway, style. Please, head to head to Maxamet vs K390, MC?!!
Im looking to get a Spyderco soon, should i go with K390 or CruWear/PD#1???
Love k390. I have the endela and endura. Waiting for delica.
This might make me pull the trigger on a delica. K390 is pretty beast!
😅 Me buying all the OLD favorites in nearly 2025 for the most possible money... I was a "good boy" for like 6 months before the Black Friday/Christmas sales.
In 2020 I was spending all my expendable income on electric guitars, amplifiers and like 30 guitar pedals. What can I say, I like expensive things. 😂
The Delica is just missing a finger choil. Add some g10 scales and a wire clip and I'm sold. Basically, just make an extra large Dragonfly in g10.
Just a warning to anybody taking this knife apart (I did it) you need 3 hands to put it back together. I had to use my teeth to put the screw back in that goes through the back lock spring back while using my hands to hold the tension down.
I agree! Its a very bad idea to take it appart. Just dont do it!
Assemble the knife but leave the back lock pin out, close the blade up, push the back lock down onto the spring and simultaneously push the pin through until the back lock hole meets up with the pin and it pops through. Takes about 20-30 seconds, no more. Simple.
whats your thought between k390 and maxament. is k390 a better all purpose steel. i guess we are always looking for that one knife that last forever. i have the para 3 in max as well but its just too small of a knife. i have the itch to buy another knife.
K390 has better toughness but it won't hold an edge as long. I have a keychain Ladybug in K390 and my Para 3 is in Maxamet. Both are monsters. I can't tell the difference during daily general use
@@metal_complex thank you. I gues at that point the knife style becomes more of a factor since they both exceeded my cutting uses. I have the para 3 in max as I said but I really like the endura handle length. 1st world problems I guess.
Not sure if I should get k390 or the bento box m390 delica
Comes down to want stainless or not. K390 will rust easier than M390
@@cameronbottoms1118 think I'm going m390. I want a pm2 or pm3 in k390 and maxamet. The delica would be an every day carry like my spy27 pm3 lw and I live in Texas by the river. So humidity stays above 80% most of the year 😫
@@gearfireman PM2 in maxamet was in stock on Blade HQ i’ll get back with you if it still is
@@gearfireman It is in stock for 217.00
Highly enjoyed this video 😉
i m frustrated pre orders are denied out of the usa at blade hq
Nick shabazz has entered the chat
I got one of these. This is a great knife.
great video, like always. I was considering buying this knife and yours is one of the most detailed reviews i could find; I already havea vg10 delica and was considering upgrading it to a zdp189 or a k390 version or change platform and buy a para 3 lightweight. having you held all of these knives, which one do you suggest me picking up? thank you for your time and keep up the great videos!
Why haven't we seen any coated K390?
Especially from Spyderco, I would've thought they'd have released some DLC K390 or DLC Maxamet by now, so we can get all the awesomeness of these steels without worrying about the corrosion so much.
And I don't seem to see anyone else talking about it. Why is that?? :o)
Do you prefer k390 over s20v?
I personally wouldn't pay 85 for vg10 but k390 has me interested.
awesome looking knife really like the scales. nice new steel
I heard k390 is very difficult to sharpen
Just snagged me a KnifeJoy exclusive 20cv Delica🔥
Just got one, really Good
I bought the last one on sale rn on Amazon HAHA
I have the manbug k390, it's a great little knife. Damn near filleted the tip of my finger tho🤣
Same. Most "almost" injuries ever
K390 has a higher carbon content it will hold an edge longer. Maxamet has more chromium content making it more corrosion resistant. Great video though!
Cedric and Ada, the channel other channels refer to for testing. Aussie Aussie Aussie!
I mean... he knows what he's doing 👍
For a light EDC user, I bet if you stroped this knife once a month you might never have to actually sharpen it
Started to pry with mine the other day without thinking but caught myself before I snapped it. Ik k390 ain’t crazy tough especially in this thickness
Yea it's definitely the wrong steel to pry with
It's the wrong tool to pry with.
Maybe just the word Delica 🤔
Sorry to hear about your loss
😂😂😂
Delica has a handle that is a bit too long
Agree.
Also, thats what
She said !!!
This is crazy !!!!!!!
And it's sold out
I'd say give it a week. Its a Delica
Microclean