Eurowise air suspension 2 inch lift install on a touareg

Поделиться
HTML-код
  • Опубликовано: 18 дек 2024

Комментарии • 19

  • @yoda_brh
    @yoda_brh Год назад

    Thank you for the video. Mind if I ask exactly what you did or set the length of the level sensors to? EW didn’t exactly have instructions on it and I’m thinking that’s the reason why my Cayenne’s front suddenly dropped after few days. You mentioned in the last part of the video about the location of the level arm in relation to the connector. Thanks again

  • @hkarger07
    @hkarger07 6 месяцев назад

    Do you happen to remember how long this took you.

  • @gabrielwagner6372
    @gabrielwagner6372 Год назад

    Hey man, I saw in that interview you had to replace some air suspension parts - did you do the entire strut or just air spring? Any issues with the air suspension after DIYing it?

    • @Boostforthecure
      @Boostforthecure  Год назад

      just the bag and kept the OG strut and no issues after

    • @gabrielwagner6372
      @gabrielwagner6372 Год назад

      @@Boostforthecure Thanks man. You used OEM bag with continental rubber? I have a ton of questions about the CV geometry and longevity… how’s axles holding up 1 year after the subframe drop?
      Feel free to give me a PM sometime and i’d be happy to pay you for an hour to chat about some questions on this

  • @nicupanescu6272
    @nicupanescu6272 2 года назад

    Nice job. I want to install this kit on my Touareg but I have some concerns : there is any difference in the stiffness of the suspension after installation? The 2 inch lift, is achieved only from the kit or is a combination between kit and the strut air?

    • @Boostforthecure
      @Boostforthecure  2 года назад

      no diference in ride quality and 2 inch lift was done with this kit

  • @nicupanescu6272
    @nicupanescu6272 2 года назад

    Nice job! Dyd afect geometry? Upper controll arm pozition and joint its not afected?

    • @Boostforthecure
      @Boostforthecure  2 года назад

      upper control arm no axle yes subframe drop is needed to use the off road modes.

    • @Boostforthecure
      @Boostforthecure  2 года назад

      2 inch is the max you can get without needing upper arms

  • @XCityTh3King
    @XCityTh3King 3 года назад

    So you have to loosen all the pivot points? That's on both ends and not just one end of each component? And just loosen not completely remove right?

  • @andriisuvorov2793
    @andriisuvorov2793 3 года назад

    Hey bud how is your ride? How is your axles? Any clicking? I did same lift, have clicking axles, may need a little frame drop... trying to figure is it only my tank give issues) could you please do mesurements from floor to fender on all suspension positions? Great job!

    • @Boostforthecure
      @Boostforthecure  3 года назад +1

      axles clicked on heavy acceleration from a stop but they are 200,000 mile axles. did a 1 inch drop on the subframe and no issues since and will get measurements soon

    • @andriisuvorov2793
      @andriisuvorov2793 3 года назад +1

      @@Boostforthecure thank you for information. I will order my frame drop kit first thing after new year. I have v8 and it is simular to v10 dimension wise. BTW have you already ordered front dill lock? It is available now from Harrop! Cant wait to get mine))))

    • @Boostforthecure
      @Boostforthecure  3 года назад

      @@andriisuvorov2793 havent ordered yet still doing my rear locker retrofit

  • @ΛΕΥΤΕΡΗΣΔΑΚΤΥΛΙΔΗΣ-μ5λ

    HELLO
    I ALSO INSTALLED THIS LIFTING KIT ON TOUAREG BUT I HAVE SOME ISSUES
    YOU LISTEN TO A TACK TACK FROM THE FRONT WHEEL GENTLEM IN THE EXTRACTS OF THE CAR
    WHAT SHOULD I DO???

    • @Boostforthecure
      @Boostforthecure  2 года назад +1

      find the issue and see what's tack tack tacking

  • @RDubbayah
    @RDubbayah 3 года назад

    This you, Ragu?