Yes sir they do...two piece wing held onto the wing saddle via wing tabs, connect servo leads per your set up. The assembly manual can explain lots more available on MotionRC website....can download it for review and study.
Depends on your skill level and Airfield runway.....I fly off of well manicured grass just fine. Take off and flying are pretty easy as the model flies exceptionally well. The landings must be very soft and due to the tail, landing with nose wheel flare will strike the tail, therefore landings must be level three pointers and smooth. I have no reference to flying off of hard surface runway. The assembly may be challenging for Noobs due to the twin set up....however if you are Balsa ARF experienced it's really a straight forward assembly. I was really surprised how it flew even in gusty wind conditions. Oddly satisfying subject matter. I did damage a wing after a landing gear pulled away in soft muddy conditions - I ordered a replacement wing and flying it just fine afterwards. Strongly suggest reading over the RCGroups thread for this model...tons of real life experience is available for this model: www.rcgroups.com/forums/showthread.php?3565749-Dornier-Do335-Pfeil-Black-Horse-Models and www.hobbysquawk.com/forum/rc-airplanes/rc-propeller-airplanes/239941-official-black-horse-1724mm-dornier-do335-pfeil-arrow-thread
![[DRAGON BALL LEGENDS REVEALS ＆ STUFF] LEGENDS FESTIVAL 2024 Special Edition Part 2](http://i.ytimg.com/vi/af0phKxitX8/mqdefault.jpg)
Hi, can you disconnect the wings for the easy transport?? Thanks Paw
Yes sir they do...two piece wing held onto the wing saddle via wing tabs, connect servo leads per your set up. The assembly manual can explain lots more available on MotionRC website....can download it for review and study.
Hi, one more question. Would you recommend it? How it’s flying in general? Thinking to get! Thanks for all help.
Depends on your skill level and Airfield runway.....I fly off of well manicured grass just fine. Take off and flying are pretty easy as the model flies exceptionally well. The landings must be very soft and due to the tail, landing with nose wheel flare will strike the tail, therefore landings must be level three pointers and smooth. I have no reference to flying off of hard surface runway. The assembly may be challenging for Noobs due to the twin set up....however if you are Balsa ARF experienced it's really a straight forward assembly. I was really surprised how it flew even in gusty wind conditions. Oddly satisfying subject matter. I did damage a wing after a landing gear pulled away in soft muddy conditions - I ordered a replacement wing and flying it just fine afterwards. Strongly suggest reading over the RCGroups thread for this model...tons of real life experience is available for this model: www.rcgroups.com/forums/showthread.php?3565749-Dornier-Do335-Pfeil-Black-Horse-Models and www.hobbysquawk.com/forum/rc-airplanes/rc-propeller-airplanes/239941-official-black-horse-1724mm-dornier-do335-pfeil-arrow-thread