Great Video... thanks a lot for uploading such informative videos. Can you please make a video tutorial on "How to use esp32 as a radio player and then use Bluetooth speaker to hear that radio stream?". Thank you
Thanks for this video it was exactly what I was looking for, I was really surprised at how many stations it was able to pick up with no antenna. I plan on looking in to adding the touch screen next. Hopefully they bring this to ESPHome, my preferred method of interaction with the ESP32 but this was still fun and useful. Definitely Now a subscriber.
Glad you found it helpful. I was also a bit surprised at the reception, especially since I was testing from my basement. I hope to add it to my next version of my DIY amp... with an improved touch screen over what I now have. Thanks for watching, taking a moment to leave a comment... and for the sub. Welcome to the channel!
Same here... don't listen to FM often. But it is a nice 'fall-back' for still having an audio source in the event of an Internet outage... or if one of your favorites streaming services suddenly becomes unavailable (you know the one!). Don't know when I'll actually get it integrated into the amp. But it will be a nice "backup" and alternative to have available.
Well, as would be expected, some stations are better than others, but the reception seemed on par with my regular audio receiver. And honestly, the TEA5767 with the included antenna had better reception, but the continuous background "clicking" noise was a non-starter for me. And I do like the RDS info I get with the SI4703. The question will be what the reception is like when integrated into my amp. For this test/video, I was using a 3 ft. audio cable (antenna). But I'd want something much shorter when integrated. That remains to be seen/tested. But thanks for the comment!
when i add the dasboard.yaml , i found error, Configuration errors Error loading /config/configuration.yaml: in "/config/configuration.yaml", line 12, column 11: Unable to read file /config/dasboard.yaml.any suggestion
You should not have a 'dashboard.yaml' file. If you are referring to the sample code from the Github repository, then the 'dashboard.yaml' file just includes sample code that contains the items that you would add through the normal Home Assistant dashboard editor. This is there for you to use an example to create your own dashboard. In fact, very little (if any) of the YAML code I provide can just be copied and pasted into your own Home Assistant. These files are just provided as _examples or guidelines_ for creating your own versions. This is especially true for any 'dashboard' examples. While these are written in YAML, they are not standalone '.yaml' files in your normal configuration. This shows that, for example, you would create a vertical stack card, that would then contain other cards listed, etc. via the dashboard editor tools.
@@ResinChemTech when i upload mqtt_entitites yaml. i found error :Configuration warnings Integration error: mqtt_entities - Integration 'mqtt_entities' not found.
Yes... this applies to all the YAML. It is provided as an _example_ for creating your own. You will almost always get errors and have issues if you just try to copy/paste YAML from someone else's Home Assistant configuration into your own. There are too many difference in how things are configured. You need to have at least a basic understanding of YAML, how it works and how it is configured before you can take someone else's configuration YAML and be able to adapt it for your own use. None of the YAML I provide in this repo can just be copied and pasted. You won't have your Home Assistant configured to use these file names (helpers.yaml, mqtt_entities.yaml, etc.). As the documentation in the Github repo clearly states: "It is unlikely that you will be able to just copy/paste these into your Home Assistant. Each entity or integration type should be placed in the appropriate location within your own Home Assistant (e.g. sensors, switches, automations, etc.)" So, you MUST take each of the helpers in the helpers.yaml file and place it in the appropriate location in your own configuration, renaming things as necessary. Same with all the other YAML files. You CANNOT just copy these YAML files and place in your /config folder in Home Assistant. That is never going to work.
How close was your cell phone while you had the radio on? Nextel phones were notorious for alerting you to an incoming call by making your computer speakers pop and click, but newer phones still do it, though not as bad.
Well, my phone was in the same room but not near or next to the FM receiver. And I probably spent about an hour messing with different wiring, etc. to see if I could get the clicking or popping to stop and I'm pretty sure I didn't receive a single call or text during that time. And at one point I took the setup to a different floor of my home to see if better reception would make a difference (it didn't), so it would have been at least a floor away from my phone. In a way, I'm kinda' glad it happened because I liked the additional feature of the SI4703, like RDS decoding, better than the TEA5767 anyway. But thanks for the tip and what might have been causing the issue.
Nice! I was wondering if you made a video or wrote a blog about your cabinet lighting? I wanted to see your approach before tacking my project. Thanks again for the great content you create!
Thanks! I haven't done a video specifically on my cabinet lighting, but I really used the same process that I show in this video on planning an LED install, where I install lights under my desk: ruclips.net/video/CffQpp-JSMo/видео.html In my case, since I had four 'segments' of cabinets... upper and lower on opposite sides of the kitchen, I ended up with four WLED controllers that I sync together. However, depending on how you want to run the wiring, you could use a single controller and use WLED segments if you wanted separate control (e.g. colors/effects) for different areas of the cabinets. There is one other note. I originally installed WS2812b 60 LED/m. For the under cabinet lighting (that actually lit up the counters), is wasn't as much light as I hoped, so I went back and replaced them with SK6812 144/m LEDs that have a true white channel. This provides much better working light. I believe I talk about LED selection in the above video as well. And as always, be sure to let me know if you have any questions.
You are welcome. It's a pretty easy project and not for everyone, but I occasionally like to try out a new component and learn a little about it, even if I don't have a particular need for it at the time. Thanks for watching and taking a few moments to leave a comment. I appreciate it.
Have you tried using a different power supply for the wemos and the radio board ? Most likely picking up data from the wemos as the power supply isn’t the cleanest ……
I did try three different power sources and also tried keeping the power supply cable as far away from the wires connecting the Wemos to the receiver as I could. The constant 'clicking' sound remained and upon doing some research, it was a common reported problem with the TEA5767. I didn't experience the issue at all with the SI4703, so I do think it is something specific to the TEA5767... or at least the board I had.
@@ResinChemTech I’m not one for giving up on anything until I know the exact reason 🤣 OCD about finding problems and resolving them, as a professional designer it’s my thing. I’ll order one and see if I can help solve the issue 👍 great channel btw 👍🇬🇧
I have, although normally in conjunction with ADS-B aircraft tracking. But I know that they also work in the FM radio range. For my particular use case, I wanted a simple low cost option with a basic audio line-in for adding to my DIY amplifier. At about 1/4th the cost (or less), these little FM receiver boards fit my particular needs. But thanks for sharing an alternative. I may take a look at one somewhere down the road.
❤am radio ❤you for all you do ❤
Great Video... thanks a lot for uploading such informative videos. Can you please make a video tutorial on "How to use esp32 as a radio player and then use Bluetooth speaker to hear that radio stream?".
Thank you
Thanks for this video it was exactly what I was looking for, I was really surprised at how many stations it was able to pick up with no antenna. I plan on looking in to adding the touch screen next. Hopefully they bring this to ESPHome, my preferred method of interaction with the ESP32 but this was still fun and useful. Definitely Now a subscriber.
Glad you found it helpful. I was also a bit surprised at the reception, especially since I was testing from my basement. I hope to add it to my next version of my DIY amp... with an improved touch screen over what I now have.
Thanks for watching, taking a moment to leave a comment... and for the sub. Welcome to the channel!
Neat - I hadn't considered a FM board. My wife listens to FM in the car and some streaming. I very occasionally listen to it via streaming.
Same here... don't listen to FM often. But it is a nice 'fall-back' for still having an audio source in the event of an Internet outage... or if one of your favorites streaming services suddenly becomes unavailable (you know the one!).
Don't know when I'll actually get it integrated into the amp. But it will be a nice "backup" and alternative to have available.
If you build and test in your finished basement and get good signal it seems quite good using the audio cable as the antenna
Well, as would be expected, some stations are better than others, but the reception seemed on par with my regular audio receiver. And honestly, the TEA5767 with the included antenna had better reception, but the continuous background "clicking" noise was a non-starter for me. And I do like the RDS info I get with the SI4703. The question will be what the reception is like when integrated into my amp. For this test/video, I was using a 3 ft. audio cable (antenna). But I'd want something much shorter when integrated. That remains to be seen/tested.
But thanks for the comment!
Stereo to BNC adapters are available for those of us that use/need external antenna for some stations.
when i add the dasboard.yaml , i found error, Configuration errors
Error loading /config/configuration.yaml: in "/config/configuration.yaml", line 12, column 11: Unable to read file /config/dasboard.yaml.any suggestion
You should not have a 'dashboard.yaml' file. If you are referring to the sample code from the Github repository, then the 'dashboard.yaml' file just includes sample code that contains the items that you would add through the normal Home Assistant dashboard editor. This is there for you to use an example to create your own dashboard.
In fact, very little (if any) of the YAML code I provide can just be copied and pasted into your own Home Assistant. These files are just provided as _examples or guidelines_ for creating your own versions. This is especially true for any 'dashboard' examples. While these are written in YAML, they are not standalone '.yaml' files in your normal configuration. This shows that, for example, you would create a vertical stack card, that would then contain other cards listed, etc. via the dashboard editor tools.
@@ResinChemTech Does this also apply to automations.script.yaml, helpers.yaml and mqtt_entities.yaml
@@ResinChemTech when i upload mqtt_entitites yaml. i found error :Configuration warnings
Integration error: mqtt_entities - Integration 'mqtt_entities' not found.
Yes... this applies to all the YAML. It is provided as an _example_ for creating your own. You will almost always get errors and have issues if you just try to copy/paste YAML from someone else's Home Assistant configuration into your own. There are too many difference in how things are configured. You need to have at least a basic understanding of YAML, how it works and how it is configured before you can take someone else's configuration YAML and be able to adapt it for your own use.
None of the YAML I provide in this repo can just be copied and pasted. You won't have your Home Assistant configured to use these file names (helpers.yaml, mqtt_entities.yaml, etc.). As the documentation in the Github repo clearly states:
"It is unlikely that you will be able to just copy/paste these into your Home Assistant. Each entity or integration type should be placed in the appropriate location within your own Home Assistant (e.g. sensors, switches, automations, etc.)"
So, you MUST take each of the helpers in the helpers.yaml file and place it in the appropriate location in your own configuration, renaming things as necessary. Same with all the other YAML files. You CANNOT just copy these YAML files and place in your /config folder in Home Assistant. That is never going to work.
@@ResinChemTech finally work .thank you
How close was your cell phone while you had the radio on? Nextel phones were notorious for alerting you to an incoming call by making your computer speakers pop and click, but newer phones still do it, though not as bad.
Well, my phone was in the same room but not near or next to the FM receiver. And I probably spent about an hour messing with different wiring, etc. to see if I could get the clicking or popping to stop and I'm pretty sure I didn't receive a single call or text during that time. And at one point I took the setup to a different floor of my home to see if better reception would make a difference (it didn't), so it would have been at least a floor away from my phone.
In a way, I'm kinda' glad it happened because I liked the additional feature of the SI4703, like RDS decoding, better than the TEA5767 anyway.
But thanks for the tip and what might have been causing the issue.
Nice! I was wondering if you made a video or wrote a blog about your cabinet lighting? I wanted to see your approach before tacking my project. Thanks again for the great content you create!
Thanks! I haven't done a video specifically on my cabinet lighting, but I really used the same process that I show in this video on planning an LED install, where I install lights under my desk: ruclips.net/video/CffQpp-JSMo/видео.html
In my case, since I had four 'segments' of cabinets... upper and lower on opposite sides of the kitchen, I ended up with four WLED controllers that I sync together. However, depending on how you want to run the wiring, you could use a single controller and use WLED segments if you wanted separate control (e.g. colors/effects) for different areas of the cabinets.
There is one other note. I originally installed WS2812b 60 LED/m. For the under cabinet lighting (that actually lit up the counters), is wasn't as much light as I hoped, so I went back and replaced them with SK6812 144/m LEDs that have a true white channel. This provides much better working light. I believe I talk about LED selection in the above video as well.
And as always, be sure to let me know if you have any questions.
Excellent work..... keep the ideas and video flowing!
Thanks. I appreciate it!
Thanks for the video. Looks like a project for over Christmas. Cheers Dave.
You are welcome. Good luck with the project!
Very interesting project thanks for sharing!
You are welcome. It's a pretty easy project and not for everyone, but I occasionally like to try out a new component and learn a little about it, even if I don't have a particular need for it at the time.
Thanks for watching and taking a few moments to leave a comment. I appreciate it.
Have you tried using a different power supply for the wemos and the radio board ? Most likely picking up data from the wemos as the power supply isn’t the cleanest ……
I did try three different power sources and also tried keeping the power supply cable as far away from the wires connecting the Wemos to the receiver as I could. The constant 'clicking' sound remained and upon doing some research, it was a common reported problem with the TEA5767.
I didn't experience the issue at all with the SI4703, so I do think it is something specific to the TEA5767... or at least the board I had.
@@ResinChemTech
I’m not one for giving up on anything until I know the exact reason 🤣
OCD about finding problems and resolving them, as a professional designer it’s my thing.
I’ll order one and see if I can help solve the issue 👍 great channel btw 👍🇬🇧
👍👍👌👌
Thanks!
Have you ever heard or thought about an SDR (Software defined radio) plugs in via USB
I have, although normally in conjunction with ADS-B aircraft tracking. But I know that they also work in the FM radio range. For my particular use case, I wanted a simple low cost option with a basic audio line-in for adding to my DIY amplifier. At about 1/4th the cost (or less), these little FM receiver boards fit my particular needs.
But thanks for sharing an alternative. I may take a look at one somewhere down the road.