Thanks for watching. We like them they are a good tire. Most people that ride around us dont like them because they slick over some. But we have run them in the past and they worked really good.
Only tire I want is the one you didn't mention but stod next to it and put your elbow on it at the end of your video. Can you give me information on it please. Thanks Michael
Thanks for watching. system3offroad.com/xcr350 us this link to see more on this tire you asked about. It is a System 3 XCR 350. It is a good tire for hard pack and rock. It does not like mud but it does excellent in the other environments.
looks like a set of the rock a billy in the last part of this vid..any info on these tires...also have yall ran any of the Frontline BDC tires ...good looking tires would love to hear about these two tires..
Thanks for watching. The Rock-A-Billy tire is a good tire. It grips more than you would think with the pattern it has and size of lugs. It also wears really well so you can get a lot of miles out of a set. The Frontline tires we have not tried out yet. Also a tire that we like even more than the Rock-a-billy is a Trail saw tire. It is made by the same company and it looks good and performs even better. Might check it out.
It be nice if they made that black water in a 14” or 15” on there 34” tire. I had the itp 34” tires, and they were good and very light. 39lbs a piece, but sadly they came in a 17” wheel, and I don’t think there is beadlocks in that size for utv bolt pattern. They may have even discontinued the old 34s. I’m not sure.
I’m wanting to switch out my stock big horns 2.0 for the bfg’s. Will I have a big power loss or start smoking belts because of the weight difference between these 2 tires ? I don’t want to have to mess around with my clutching on my 2021 can am x3 turbo r. And advice is appreciated
Thanks for watching. We have done a lot of bigger tires swaps on Maverick X3's and for the most part we do not clutch them. We just use Low gear more often as to not slip the belt. Power loss will be there a little as it just happens with larger tires.
We have had people run them and like the OK. But they are not overly impressed with it. They say it is a tire that dont like to clean out good. But we have not run them so we cant say for sure.
I have a 2021 krx1000...if that will help a lot on you Answering me on best long lasting tires for me ....running a lot on asphalt.. Mud and dirt... More asphalt than anything.
I am waiting on a 21 Ranger 1000xp Ultimate that we ordered. Live in the upper midwest & I am thinking of going with a System 3 XCR350 in a 30x10x14. Asking cause I was hoping you were gonna talk about them at the end, but, you just leaned on it a bit & the video ended there...lol Curious to know what your opinion on those are?
Thanks for watching. The XCR350 is a good tire. That tire does good on the road and gravel, it wears good and grip will in most all terrain. The tire will go through deep mud but it will need wheel speed to keep the tire treads cleaned out. But we do sell the XCR350 well and never get any complaints. You will like them where your at.
What Machine. If it is a 64 inch wide. I would go with a 5-2 offset. Raceline or Sedona wheel. With a 32-10-14 Carnivore or XTR 370. Those are great tires. If 72 inches wide. get a 6-1 offset wheel and run the same tire.
I have a 2022 Can Am maverick sport xxc 1000r and I've already had a flat in the stock Maxxis bighorn 2.0. That's 3 straight years with flats in Maxxis tires. Running 14 psi and usually on rocky/dirt trails. Old rail bed. Anyway I'm looking to change the tires to 30x10x14 and I want to stay away from having to do any clutch work. I ride a bit of pavement also. Unfortunately. Obviously looking for more toughness. I'm looking at rock a billys and m1 evils and a few other's but what do you suggest? I live in 🇨🇦 so $300 a tire is low. Also there's a Canadian UTV tire called Traxion Alpha. Have you heard anything about them? Thanks for your time.
Thanks for watching. The Rockabilly is a better tire in my opinion than the M1 tires. The Rockabilly tire will wear really good and work great where your riding at.
I'm making my 2014 Maverick XRS street legal so I can run around my little town. I want to buy a second set of tires to run on asphalt, what tire do you recommend for the street ? I'm not about to ruin my trail tires on asphalt.
Thanks for watching. If your on the east coast riding I would look at the Carnivore tire in size 33 inch. Also we just got a Roctane T4 in stock and it looks great as well. They make it in a 33 inch tire for 15 inch rim. We think this new tire will be a great option for east coast riding.
Thanks for watching. We have not had a Commander XMR yet, but we have had the XTP Commander and we have been putting 32 inch tires on them with no issues. I would say with confidence that 32 inch tire will work.
I am wondering about a great tire for the X3 XRS Max RRS and want to go to 35” in a 15” wheel but am worried about performance loss.This came with the wider wheel in rear and 30” bighorns on 14” bead lock wheels
Thanks for watching. If you have a Max and run a 35 inch tire it will hurt the performance on it alot. I would go with the 15 inch rim and put a XTR370 in a 33-10-15 on it. That away you have a big tire but will still keep some of the performance of the motor.
Can you tell me what is the best trie to buy to run on asphalt i do a lot of riding on asphalt....but i do riding in mud and dirt also so can you tell me the best tire that will last longer for my riding
I know you've got this question alot but I'm lookin at 30s and 32s carnivore or xtr370 for a talon 1000r what do you think about the sizes and the models thanks
Thanks for watching. If that was my machine I would go with the 32-10-15 Carnivores and they will work out great for you. The XTR370 on that machine will hurt the power and sporty feel of it for sure.
@@AdrenalineCyclesKy i have a xmr turbo RR and stock are 30"s. Is going to a 32" gonna cause any issue with the sxs? I keep hearing people say you need to upgrade clutching if going to a larger tire?
Thanks for watching. We have some on order but they have not showed up yet. We will have some one in our riding group run them once we get our hands on a set. They look like they will be a good tire for sure.
Thanks for watching. I would do the 32-10-14 or 32-10-15 Carnivore or Roxxzilla. Both of those tires and size in 32 inch tall you will not need any clutching work done.
Thanks for watching. If you stay in the woods and dont ride much pavement I would go with the Carnivore. But if you ride on pavement a lot then I would look at a the XTR370 as they will wear better on blacktop than the Carnivores.
For Windrock and the TWRA area we have been basically running 3 tires there with really good success. 1 ins 32-10-15 Carnivores the next is 34-10-15 Super ATV Warriors and the last is 33-9.5-15 Roctane X2. These three tires we have run or have guys riding with us a lot and have had great luck and good traction with these tires in that area of TN.
@@JayGood73 I'm running the that setup on my base model x3 64 inch and its amazing especially in West Virginia and around rocks can't beat the carnivore imo 😎
Thanks for watching. I would go with a 4-3 offset rim. Get the stance a little wider for the stability. Tires I like the XTR 370 or do a Carnivore in a 30 inch.
@@AdrenalineCyclesKy will these fit on a Maverick sport with 6+1 offset without rubbing? I am really interested in the system 370s. How do you compare them to the carnivores?
Thanks for watching. Right now all we have is a set of Pro Armor Pro Runners. We sold out of the 33-15" XTR370. We usually have a bunch of them but they have sold out and are on back order.
Thanks for watching. We have been running the System3 XTR370 in 32 inch and 33inch tire size. I just put the 35 inch tires on my Max X3 and they grip. Ride good got deep treads and do well. I think you would like them if your liking the Roctane.
Thanks for watching. If your running a machine that can spin the tires up really good then they will both perform about the same. Only if you have a machine around a 100hp I would say the carnivore has the advantage.
@@AdrenalineCyclesKy They will be going on a Mule Pro FXT...around 46 HP I think...tire size gonna be 28×10x14...you recommend the Rampage or another tire. I live in Western NC. Drive some on roads and trails
Bit late to the show, but what tire do you recommend on a 2021 rzr turbo (64”) will be driven 99% on eastern ky and Hatfield McCoy trails. Was looking at carnivores but open to anything
Thanks for watching. Yeah the carnivore is a good tire option and another tire is the XTR370 from System3 is built like a carnivores but is a lot more durable and will last longer that a Carnivore. Check that tire out.
@@AdrenalineCyclesKy thank you for the timely response, in order to throw on 30 or 32” carnivores would I need a new set of rims or could I use stock rims? I know my current are 29” big horns 29x9r14 and 29x11r14. Research online says I’ll need new rims but everything contradicts that I’ve read. I guess my question is could I go with 30 or 32s and not upgrade anything or would I need to upgrade a lot. I plan a clutch kit, belt, axles, and tune soon
@@AdrenalineCyclesKy to touch up slightly more on my question, I believe the front tires are skinnier stock but all 4 rims are 14x7 meaning If I have 9 wide and 11 wide to begin with I could square it all off at 10 wide on stock rims fine?
That is a good tire. It is better in the 30-32 size the larger 35 inch tire is harder to get it to clean the lugs out. But it is a popular tire for sure.
My stock Rmax XTR came stock with Carnivores and that tread pattern cleans out a little to well for me. It throws mud everywhere!
Thanks for watching. Yeah they can sling mud everywhere for sure. A good tire to try if you want is a KM3 from BFGOODRICH
Why did you skip over the rock-a-billy’s? I have a friend that has them on a rare pro and he loves them.
Thanks for watching. We like them they are a good tire. Most people that ride around us dont like them because they slick over some. But we have run them in the past and they worked really good.
Only tire I want is the one you didn't mention but stod next to it and put your elbow on it at the end of your video.
Can you give me information on it please.
Thanks
Michael
Thanks for watching. system3offroad.com/xcr350 us this link to see more on this tire you asked about. It is a System 3 XCR 350. It is a good tire for hard pack and rock. It does not like mud but it does excellent in the other environments.
Check out the selection in the Carlisle catalog.
Thanks for watching.
I own a 2020 X3 xrc turbo rr 72" wide
will stock canam OEM 14inch non beadlock rims fit on the machine with no rub or issues non beadlock rims 14inch
Thanks for watching. They will fit.
thanks for the info. i went with the maxxis rampage for the best of both worlds.
Good choice!
System 3 xtr370 is amazing tire for around wv
Thanks for watching. Yeah we have had a great deal of customers moving from Carnivores over the the 370 tire. It performs well and looks great.
looks like a set of the rock a billy in the last part of this vid..any info on these tires...also have yall ran any of the Frontline BDC tires ...good looking tires would love to hear about these two tires..
Thanks for watching. The Rock-A-Billy tire is a good tire. It grips more than you would think with the pattern it has and size of lugs. It also wears really well so you can get a lot of miles out of a set. The Frontline tires we have not tried out yet. Also a tire that we like even more than the Rock-a-billy is a Trail saw tire. It is made by the same company and it looks good and performs even better. Might check it out.
It be nice if they made that black water in a 14” or 15” on there 34” tire. I had the itp 34” tires, and they were good and very light. 39lbs a piece, but sadly they came in a 17” wheel, and I don’t think there is beadlocks in that size for utv bolt pattern. They may have even discontinued the old 34s. I’m not sure.
Yeah beadlock wheels in bigger sizes are hard to find and very few offset options.
I don't even have a sxs but here I am researching tires
Thanks for watching.
system 3 and km3 are making a move, have you seen an increase in sales on them for the east coast riders?
Thanks for asking. Yeah we have a lot of sales for the XTR370 tires out on the east coast.
Great informational video!
Thanks for watching.
I’m wanting to switch out my stock big horns 2.0 for the bfg’s. Will I have a big power loss or start smoking belts because of the weight difference between these 2 tires ? I don’t want to have to mess around with my clutching on my 2021 can am x3 turbo r. And advice is appreciated
Thanks for watching. We have done a lot of bigger tires swaps on Maverick X3's and for the most part we do not clutch them. We just use Low gear more often as to not slip the belt. Power loss will be there a little as it just happens with larger tires.
No m1 evils? I ran m1s at brimstone this past week and was greatly impressed!
We have had people run them and like the OK. But they are not overly impressed with it. They say it is a tire that dont like to clean out good. But we have not run them so we cant say for sure.
I have a 2021 krx1000...if that will help a lot on you Answering me on best long lasting tires for me ....running a lot on asphalt..
Mud and dirt...
More asphalt than anything.
I would look at a 32-10-15 KM3 from BFGOODRICH.
I am waiting on a 21 Ranger 1000xp Ultimate that we ordered.
Live in the upper midwest & I am thinking of going with a System 3 XCR350 in a 30x10x14. Asking cause I was hoping you were gonna talk about them at the end, but, you just leaned on it a bit & the video ended there...lol
Curious to know what your opinion on those are?
Thanks for watching. The XCR350 is a good tire. That tire does good on the road and gravel, it wears good and grip will in most all terrain. The tire will go through deep mud but it will need wheel speed to keep the tire treads cleaned out. But we do sell the XCR350 well and never get any complaints. You will like them where your at.
Wheel and tire combo for all terrain
What Machine. If it is a 64 inch wide. I would go with a 5-2 offset. Raceline or Sedona wheel. With a 32-10-14 Carnivore or XTR 370. Those are great tires. If 72 inches wide. get a 6-1 offset wheel and run the same tire.
I have a 2022 Can Am maverick sport xxc 1000r and I've already had a flat in the stock Maxxis bighorn 2.0. That's 3 straight years with flats in Maxxis tires. Running 14 psi and usually on rocky/dirt trails. Old rail bed. Anyway I'm looking to change the tires to 30x10x14 and I want to stay away from having to do any clutch work. I ride a bit of pavement also. Unfortunately. Obviously looking for more toughness. I'm looking at rock a billys and m1 evils and a few other's but what do you suggest? I live in 🇨🇦 so $300 a tire is low. Also there's a Canadian UTV tire called Traxion Alpha. Have you heard anything about them? Thanks for your time.
Thanks for watching. The Rockabilly is a better tire in my opinion than the M1 tires. The Rockabilly tire will wear really good and work great where your riding at.
@@AdrenalineCyclesKy awesome. Thanks for taking the time to respond and keep the great videos coming 👍🇨🇦🍻
What do you recommend for a commander 800? Really wanted the carnivores but the black waters seem to look nice. Also any opinions on tusk terrabites?
I would run the Blackwaters in a 30 inch on the Commander. They perform excellent.
What would you recommend for a Mavrick trail 1000? Mostly trail riding on loose rocky trails and some mud but not deep mud.
Thanks for watching. I would run the Carnivore in a 30-10-14 inch it will work great for you.
Sorry!! I didn't tell you were i live at ...middle TN ....
Thanks for watching.
I have a wildcat 700 sport I have carnivores now they work well u think the black waters would work better because it low hp
Yeah they can help for sure. They will also wear really good also.
@@AdrenalineCyclesKy better than carnivores? Guess a,better question would be if u had this machine which tire would u go for
I didn't see any GBC Kanati Mongrel tires.
Didn't have them in stock at the time we made the video. Maybe next round!
I'm making my 2014 Maverick XRS street legal so I can run around my little town. I want to buy a second set of tires to run on asphalt, what tire do you recommend for the street ? I'm not about to ruin my trail tires on asphalt.
I like a Rockabilly tire or a mongrel for on road riding. Also the tusk terabite.
Which would you suggest for an x3 with 15 inch rims?
Thanks for watching. If your on the east coast riding I would look at the Carnivore tire in size 33 inch. Also we just got a Roctane T4 in stock and it looks great as well. They make it in a 33 inch tire for 15 inch rim. We think this new tire will be a great option for east coast riding.
Will 30x10x14 on all four corners do ok with out changing clutch and running stock rims on 2021 HD10 Defender XT? Carnivore or Rock A Billy?
Thanks for watching. Yeah that size tire will do just fine on that machine without any clutch chances.
Have you guys put tires on a 22 commander xmr I'm having a hard time seeing what will fit thanks
Thanks for watching. We have not had a Commander XMR yet, but we have had the XTP Commander and we have been putting 32 inch tires on them with no issues. I would say with confidence that 32 inch tire will work.
I am wondering about a great tire for the X3 XRS Max RRS and want to go to 35” in a 15” wheel but am worried about performance loss.This came with the wider wheel in rear and 30” bighorns on 14” bead lock wheels
Thanks for watching. If you have a Max and run a 35 inch tire it will hurt the performance on it alot. I would go with the 15 inch rim and put a XTR370 in a 33-10-15 on it. That away you have a big tire but will still keep some of the performance of the motor.
Can you tell me what is the best trie to buy to run on asphalt i do a lot of riding on asphalt....but i do riding in mud and dirt also so can you tell me the best tire that will last longer for my riding
I would look at a 32-10-15 KM3 from BFGOODRICH.
Will a maxxis liberty 32” inch tire be an issue with a stock 14” wheel?
Thanks for watching. Depending on the machine you are putting it on. If its an X3 it will not be an issue.
@@AdrenalineCyclesKy it is an x3 forgot to mention thank you so much! one more thing, have you guys installed a can am audio roof with flip kit?
I know you've got this question alot but I'm lookin at 30s and 32s carnivore or xtr370 for a talon 1000r what do you think about the sizes and the models thanks
Thanks for watching. If that was my machine I would go with the 32-10-15 Carnivores and they will work out great for you. The XTR370 on that machine will hurt the power and sporty feel of it for sure.
@@AdrenalineCyclesKy awesome thank you for the reply
I want to upgrade my stock XDS Turbo RR tires but I am back and forth on size. What is your opinion on 30” or 32”? North East Tenn riding.
I would go with a 32 inch tire on the XDS RR model.
@@AdrenalineCyclesKy i have a xmr turbo RR and stock are 30"s. Is going to a 32" gonna cause any issue with the sxs? I keep hearing people say you need to upgrade clutching if going to a larger tire?
Have you ran any of the new Sedona Trail Saw tires?
Thanks for watching. We have some on order but they have not showed up yet. We will have some one in our riding group run them once we get our hands on a set. They look like they will be a good tire for sure.
Looking for the Carnivore tire for 2021 x3 xmr 72’’ rr what size do you recommend without having to do clutch work?
Or roxxzilla
Thanks for watching. I would do the 32-10-14 or 32-10-15 Carnivore or Roxxzilla. Both of those tires and size in 32 inch tall you will not need any clutching work done.
Got a 2021 sportsman 850 wanting to put 28inch tires on what would you recommend where in the same place
Thanks for watching. If you stay in the woods and dont ride much pavement I would go with the Carnivore. But if you ride on pavement a lot then I would look at a the XTR370 as they will wear better on blacktop than the Carnivores.
@@AdrenalineCyclesKy 👍🏻
So if you can only get 1 tire for places like windrock on a x3 xrc turbo rr what tire and size? Maxxis still doesnt have the rockzilla for 15” rim...
For Windrock and the TWRA area we have been basically running 3 tires there with really good success. 1 ins 32-10-15 Carnivores the next is 34-10-15 Super ATV Warriors and the last is 33-9.5-15 Roctane X2. These three tires we have run or have guys riding with us a lot and have had great luck and good traction with these tires in that area of TN.
@@AdrenalineCyclesKy How would the 32" Carnivores on X3 120 64" do around this same area?
@@JayGood73 I'm running the that setup on my base model x3 64 inch and its amazing especially in West Virginia and around rocks can't beat the carnivore imo 😎
What would you recommend for a 2019 maverick sport max in a 30 inch ride around east TN and southeast KY? Also what offset rim would you recommend
Thanks for watching. I would go with a 4-3 offset rim. Get the stance a little wider for the stability. Tires I like the XTR 370 or do a Carnivore in a 30 inch.
Do you recommend a clutch kit for 30 inch tires on the maverick sport max and if so which kit!
@@AdrenalineCyclesKy will these fit on a Maverick sport with 6+1 offset without rubbing? I am really interested in the system 370s. How do you compare them to the carnivores?
What u have in a 33 15” tire
Thanks for watching. Right now all we have is a set of Pro Armor Pro Runners. We sold out of the 33-15" XTR370. We usually have a bunch of them but they have sold out and are on back order.
Got 2020 maverick sport xrc, running 33 roctanes. I like them but what would you suggest for west Virginia, Tennessee, Virginia mountains. Thank you
Thanks for watching. We have been running the System3 XTR370 in 32 inch and 33inch tire size. I just put the 35 inch tires on my Max X3 and they grip. Ride good got deep treads and do well. I think you would like them if your liking the Roctane.
is there a big difference between the carnivores and the rampages in performance? look very similar...
Thanks for watching. If your running a machine that can spin the tires up really good then they will both perform about the same. Only if you have a machine around a 100hp I would say the carnivore has the advantage.
@@AdrenalineCyclesKy They will be going on a Mule Pro FXT...around 46 HP I think...tire size gonna be 28×10x14...you recommend the Rampage or another tire. I live in Western NC. Drive some on roads and trails
Do u have the km3 in 33x15
Thanks for watching. No we do not. We have 32-10-15 and 35-10-15 in stock
Bit late to the show, but what tire do you recommend on a 2021 rzr turbo (64”) will be driven 99% on eastern ky and Hatfield McCoy trails. Was looking at carnivores but open to anything
Thanks for watching. Yeah the carnivore is a good tire option and another tire is the XTR370 from System3 is built like a carnivores but is a lot more durable and will last longer that a Carnivore. Check that tire out.
@@AdrenalineCyclesKy thank you for the timely response, in order to throw on 30 or 32” carnivores would I need a new set of rims or could I use stock rims? I know my current are 29” big horns 29x9r14 and 29x11r14. Research online says I’ll need new rims but everything contradicts that I’ve read. I guess my question is could I go with 30 or 32s and not upgrade anything or would I need to upgrade a lot. I plan a clutch kit, belt, axles, and tune soon
@@AdrenalineCyclesKy to touch up slightly more on my question, I believe the front tires are skinnier stock but all 4 rims are 14x7 meaning If I have 9 wide and 11 wide to begin with I could square it all off at 10 wide on stock rims fine?
K9 supergrip.
That is a good tire. It is better in the 30-32 size the larger 35 inch tire is harder to get it to clean the lugs out. But it is a popular tire for sure.
East coast is like new england lol
Thanks for watching.