How to adjust lenses to use with adaptor Super Multi Coated Takumar 1:3.5 / 135
HTML-код
- Опубликовано: 20 окт 2024
- In this video I will you how it's possible, to adjust the focus so it can come out to infinity on a MIRRORLESS CAMERA with an adaptor, and in this case on the Olympus OM-D camera.
Remember to set a small BEFORE adjusting the focus ring, so you have a reference when restore the focus ring to the original position!
Here are some link's to different repair tool's and lubricating stuff:
Nitrile Gloves Powder free:
www.ebay.com/i...
"ORBIT" HEPA Blower:
photosol.com/p...
You can buy it here:
www.adorama.co...
"Liqui-Moly" LM 50 Litho HT:
www.amazon.co....
"Liqui-Moly" LM47 MoS2 grease with Molybdenum disulfide:
products.liqui...
or on Amazon:
www.amazon.co....
Contact glue:
www.loctitepro...
SpyderLENSCAL:
www.datacolor....
Japan Hobby Tool rubber cone:
www.amazon.com...
18 different size rubber repair tool's:
www.amazon.com...
Divider Caliper Wing Compass:
www.amazon.co....
You can also buy this set.
Lens Repair Set with pointed, flat, half flat tips:
www.amazon.com...
WERA flathead screwdriver:
www.amazon.co....
JIS cross head screw driver's:
www.amazon.com...
Or this set, that is the set I use:
www.amazon.com...
Lens cleaning wipes (PEC-PAD):
www.amazon.com...
Thin Cotton Buds x 200 you can buy them here:
www.muji.eu/pa...
DSLRKIT Pro Lens Vise Tool Repair Filter Ring Ajustment Steel 27mm to 130mm:
www.amazon.com...
Japan Hobby Tool Herical Grease Made in Japan:
www.amazon.com...
Loctite 222 50ml Threadlocker
www.amazon.com...
And you will also need some Isopropylalcohol 99%
And sometimes Lighter Fluid that is very good to clean lens element's.
NOTE: Do NOT! use Acetone on platic part's, it will damage / melting the plastic!!!
Yes the adapters often don't focus perfectly at "infinity hard stop", mostly overshoot. That works for dedicated adapter/camera but might be troublesome when more than one systems used. For the adapters are designed as 'precise' m42 flange distance.
I personally would adjust infinity when m42 on Nikon F but not for other cases. Sometimes manufacturer use thin rings to adjust optic placement in lenses and I saw some dealer provide these with CCTV lens for mirrorless which have loose infinity focus.
Ecxellent video! Thank you so much!
Hello Mike , as always this is a very good video and thanks for it .I have exactly same lens in M42 mount . is it possible to adjust as explained in your video such the lens can focus infinity with a NIkon DSLR ? thanks Daniel
Hello Mike, I need to clean a takumar 120mm 2.8, would you have any tips? it has screws between the focus ring and a top part but i don't know how to access it normally they dismount from the top but this one looks different. Thanks for your work and videos. A hug from Brazil.
I don't understand. Is your adapter not the correct distance for the lens? Shouldn't you just get a better adapter?
Great job 👍👌👏
If using an adapter,this automatically corrects the registry distance,so now with adapter which corrects can be used on another camera..what you are doing,changing the lenses registry distance,is it possible to say add a m-42 to nikon adapter,change focus or registry distance of lens,and fully use m-42 lens on a nikon digital camera,might be possible? Please try this.
With adapters tou can use most any lens fully on a mirrorless camera,please explore chance of changing focus setting as you did here,and use other than nikon lenses on a nikon digital camera?
Funny; I have 20~ Pentax lenses and I haven't had to "adjust" anything or busy myself by needlessly destroying any lenses.