How much is the amount of water needed for each plant? The cucumber needs an amount other than the tomato than onion :) How to convert the amount of water into moisture sensor reading? Thank you
hi, this is by far the best and well-shown step-by-step tutorial of the whole project. thanks for this tutorial bro. is there any way on making this project that can also be monitored with a cloud dashboard to monitor soil moisture pattern and etc. ?
@@sritu_hobby checked it..when i rewrite the code like when it has to display “Motor is on “ its will display only M-then i copied that line of your code and wrote it again in second line i wrote “O” 3rd line print -“T” 4th line print- “O” 5th line print- “R “ and so on then it will display that code….and seperate command print for each alphabet
Its like if i had to print “hello” It will display only H Then if i edit the code like this then it will display hello Print***H Print *** E Print***L Print ***L Print ***O Then it will display Hello
Thanks, your video helped me complete my end of year project
Very good arrangement
Waiting for more
Thank you
How much is the amount of water needed for each plant?
The cucumber needs an amount other than the tomato than onion :)
How to convert the amount of water into moisture sensor reading?
Thank you
My Arduino doesn't have sda and scl.. is there an alternate port i can use..how does it affect my code
Can u tell me how much dryness of soil is required to turn on the pump .
what if i want to make the watering system too? can you make a video of it?
Is the code for the water pump present in the code resource u sent ? can we directly connect a pump and will it release water?? please answer asap
Yah
Hello there,
The pump I will use is 2.5V-6V. Is it okay if I don't use the role?
It's ok
Can can we use 9V ordinary battery for power supply to Pump(9V dc motor
) and Ardunio both
Yes of course
Oh could you please tell me which sheet u used
Ok thanks
U didn't reply my request
To make a human following+optical avoiding+voice controled robot
What are you using for a box to hold everything?
Foam board
pero como hago para saber cuando le echa agua y por donde va hacer automático el echar agua?
so i can put the pump on the relay sir?
Yah
Can i use this without I2C module
Would the cord part work if you are a on apple device?
@@sritu_hobby Where do you the coding soft ware.
Where did you buy foam board and for how much
Check my description
Vídeo sobre cómo hacer una caja no estanca
hi, this is by far the best and well-shown step-by-step tutorial of the whole project. thanks for this tutorial bro. is there any way on making this project that can also be monitored with a cloud dashboard to monitor soil moisture pattern and etc. ?
you can use NODEMCU for that.
@@sritu_hobby Thank you so much 😊. Will definitely try it
Great step video!
Thank you
do you have documentation for this project
Can I use it for irrigation water pipe valve ,
Yes of course
Can I use multiple drip water valve to one ardrino
Yes of course
Can I buy one ? I am from Pune
my led doesnt show any text only back light is on please help me
can i connect the lcd to 3V , since i dont have any other 5V connection?
Sorry.The LCD display requires a 5v power supply
@@sritu_hobby Thank uu
Could you please make voice controled +human following +optical avoiding robot
How do you connect the water pump?
And i liked your video
hi can i ask is it ok with 9v battery?
Yah
Thank you it helps me lot
Your welcome
what is the name of the board you work on? with squares and everything?
Cutting mat
What is total cost in INR pls anyone tell??
I got the equipment’s for RS 850
Bro tell me the relay output connection i am using water pump motor how to connect it
Check my website
Can we connect the pump with relay
Yes of course
@@sritu_hobby ok
Where did you connect the water pump ??
Please connect it to the relay module
@@sritu_hobby got it 👍🏻
sir my display show 00000,what is the problem? and how to solve
Check the jumper wires and program
can i make this using C++ only ??
Yah
Bro nothing is displaying on the lcd please help
Also show with pump connected
Bro pls make a metal detector without Arduino or nodemcu.pls bro🇮🇳❤️🇱🇰
How to connect water pump to this pls explain someone
The circuit is blurred in the description can u send me a clear one?
For that, visit my website.
srituhobby.com
can you please include the sketch
Bro how to make power bank
Bhai Apna motor ka dikhyaya hi nhi USA Kasa konect Kasa Kare
English
Code is not compiling??
Bro where are you
Bro make how to use voltage regulator module
@@sritu_hobby thank you bro
@@sritu_hobby can you follow me in insta my insta id teentoons2020
bro ow to include i2c file
liquid crystal i2c.h file not found bata raha hai
Include the i2c library file
@@sritu_hobby how to include ?. please reply fast :(((((.
For that please visit my website
@@sritu_hobby done. But i dont find how to include it
sir make a video to connet this with water valve
Ok sure
@@sritu_hobby so did u do it ??
Yaa
@@sritu_hobby link to the video please .. thanks alot
srituhobby.com
Sir your arduino code is eror please send original code
Sir may u share the coding😢
Why is lcd showing only two words IS … M M ?? I uploaded your code
Check your I2C module
@@sritu_hobby checked it..when i rewrite the code like when it has to display “Motor is on “ its will display only M-then i copied that line of your code and wrote it again in second line i wrote “O” 3rd line print -“T” 4th line print- “O” 5th line print- “R “ and so on then it will display that code….and seperate command print for each alphabet
Its like if i had to print “hello”
It will display only H
Then if i edit the code like this then it will display hello
Print***H
Print *** E
Print***L
Print ***L
Print ***O
Then it will display Hello
This is my first time coding Arduino
☹️
Which coding language is this?!?
C language
Arduino UNO looks different than mine yours have the extra pin I'm having difficulty to connect the pins
Arduino UNO and Nano pins are same.
that is sun board
sir ji code wrong bata raha h
English??
I need answers pls
hi can you please send me the code
Visit the video description
code bro
Description
Codding issu
Check again
my display donsi'nt work
Check the jumper wires
Hello there,
The pump I will use is 2.5V-6V. Is it okay if I don't use the relay?
Better do use it