Just wanted to say that I am very thankful for finding this video, I spent an hour yesterday thinking there were a couple of bolts that need to be undone underneath the housing that wouldn’t move. I was able to swap out the headlamp in about two minutes tops .
If you have brand new lights just degrease the lens and spray with clear coat for auto paint and it will UV protect the lens and not yellow out until the clear coat comes off. Also the same company you purchased the lights from sells both in a bundle for cheaper.
Love your tutorials! Simple but vital question: how do you lift your Lando? I’m so tired of my local stealership and want to do repairs on my own. Just not sure how to efficiently lift the entire Lando. Thank you!!
Hey Chow. I need some help with my 100 series. I took out the front seats to replace the carpet. When I went to put the front driver seat back in the bolts would not tighten all the way down. It is driving me crazy!! What the heck am I missing? Sorry this comment is not related to the lamp replacement, and I have looked EVERYWHERE online and I cannot find anything.
@@chowcares I have led headlights and foglights and they seem fine but of course they don't rely so heavily on a relay as the turns lol. Worth a shot, should be pretty cheap
WARNING. I just ordered these and they no longer work. The hole is incorrect size. Bulb will not even fit through the hole. And the locking area is way too small. Can’t even rewire as the new set up is a 2 prong and the original is 3. Don’t waste your time and money.
Just wanted to say that I am very thankful for finding this video, I spent an hour yesterday thinking there were a couple of bolts that need to be undone underneath the housing that wouldn’t move.
I was able to swap out the headlamp in about two minutes tops .
where you at mane? keep the videos coming!
This is the last video, it's been 1 year and 4 months. Also last Instagram post is 1 year ago.
I HOPE YOU ARE FINE man.
I feel like I watch all your videos. Thanks for doing what you do, really appreciate it! Helps me maintain my 2001 LX 470 with almost 300k miles ;)
Good video. How come the right side has the yellow reflector already on the "original" lamp?
Haha. There was no cover on the left side. It flew off on the freeway. 😊
If you have brand new lights just degrease the lens and spray with clear coat for auto paint and it will UV protect the lens and not yellow out until the clear coat comes off. Also the same company you purchased the lights from sells both in a bundle for cheaper.
Love your tutorials!
Simple but vital question: how do you lift your Lando? I’m so tired of my local stealership and want to do repairs on my own. Just not sure how to efficiently lift the entire Lando. Thank you!!
Hi sir I have 100series diesel land cruiser so can u pls explain me the better tire size for good fuel ⛽️ average thank you sir 😊
buna ziua, uleiul din transmisia cutie automata se poate face acasa? Complet,11 litri?
Hey Chow. I need some help with my 100 series. I took out the front seats to replace the carpet. When I went to put the front driver seat back in the bolts would not tighten all the way down. It is driving me crazy!! What the heck am I missing? Sorry this comment is not related to the lamp replacement, and I have looked EVERYWHERE online and I cannot find anything.
I have a LC 100 2004 here in Venezuela I can't find any lift supension, anyone knows if I it's possible use a LC 200 OME supension 2.5 inches?
Great Video as usual! How's the quality of these? I got mine on Ebay and they turned yellow after few months.
if you do an LED bulb it might take a longer time for the bulb housing to fade into that ugly yellow again. Way less heat dispersion.
Good point, maybe I’ll give it a try. Hopefully it doesn’t trigger hyperblink
@@chowcares I have led headlights and foglights and they seem fine but of course they don't rely so heavily on a relay as the turns lol. Worth a shot, should be pretty cheap
@@chowcares LASFIT has LED lights that are anti hyper flash, plug and play! Super bright and worth the money
@@chowcares just upgrade the blinker relay to one that can handle LED. Just did this on mine
WARNING. I just ordered these and they no longer work. The hole is incorrect size. Bulb will not even fit through the hole. And the locking area is way too small. Can’t even rewire as the new set up is a 2 prong and the original is 3.
Don’t waste your time and money.
Hi there. You specifically mention using Toyota OEM parts but your links are for Amazon after market ones. How come ?
I Would renew the light bulb too while I was at it.
My headlights on the T100 are dim. Did you upgrade your bulbs to something brighter?
How about a video on cleaning the throttle body?