He was very patient and detailed in the video. I agree the caulking could have done better.. but overall he is better than other plumbers.. he will get my job
That old 3 handle Price Pfister tub faucet you took out could've probably been rebuilt with new stems and seats. Still rebuild quite a few of them to this day and never had a problem doing it. Might have even been able to salvage the trim if you didn't go full caveman on the hot handle. Moen is a fairly good brand to replace it with, but you made it sound like you were taking out a 3 handle Moen faucet in your video headline.
I could have rebuilt that old faucet. Used a handle puller to get the handle off. Kingston Brass has the same exact faucet to replace with or just rob the stems handles sleeves and escutcheons and install them and leave the old faucet rough in valve intact.
I installed that same valve a few days ago, I liked it, I thought they couldn’t have nothing but the generic Chinese valves because of the anti scald valve law, I picked it up at Lowe’s, I wasn’t expecting it to be a Moen
Ok, job for DIY, try not banging the fittings on, should slide on smoothly! You really should make sure it's level! It's leaning forward !You might want to clean the surface from existing caulk and then reply. Otherwise, if the customer is happy so be it ..
My second time working on stems yes I didn’t pack that handle out. When I threaded it back in the stand was too far and it broke the back of the valve. I know all about that stuff. Customer wants to pay you for a brand new valve should’ve put in a single handle valve and a much more better looking dumb but that’s just me.
No tiene la menor idea de nada. Solo tenía que cambiar la valvula de la llave de transferencia. No tiene necesidad de cambiar toda la griferia. Que haga un curso de plomeria urgente.
Thanks for watching. It was all getting replaced so who cares how it comes out? Not me, Just get the job done. One day you’re not going to have the tool you need. I guess you’ll just give up and go home
@@UncleHo5 It Is illegal because you do not have an anti-scalding device or a mixing valve to regulate the temperature before you enter the shower or tub.
Why take out the Price Pfister value when you can just go with the same value ? In my opinion the value that was there is better then the one being instill now
@@martinalarcon3108 that’s cute!! I bet your parents were so proud that you got a gold star in reading a tape measure in grammar school - now you grew up and can pick on others for using a random tape measure - good for you sir!! Hope you have a great day!!
Buy a puller if you’re going to do this kind of work, have right tools so you don’t look like a moron. ….or, another option is to hire a competent plumber. 🤨😏🤭🤷♂️
This guy don't know why he's doing You're supposed to have a pulley for those handles so that way you won't ruin the way he's doing Don't follow that it's not the right way to do pull those handles out
If you would have loosened the trim and used that to push the handle off, I have done this dozens of times. It would have saved a handle in the process. No sense being a barbarian and destroying things.
What’s really funny to me is all these people on here saying I’m not a Plumber, when they don’t even make time to make a channel,put in the work, post it so the world can pick it apart 😂 I want everyone to make a channel in 2024 and show their skills!
This guy is not a good maintenance person. Probably dropped the fixture because I have never in 30 years saw a fixture with bent orifices like that. Unless it was abused in some way, and judging from the way he disassembled the existing one is probably how the new one got damaged!
Como plomero sos un excelente zapatero. La silicona se pone entre la pared y la griferia, no afuera de la campana. Cambiaste una griferia al dope, solo tenias que cambiar la valvula de la llave de transferencia. Un asco como trabajas, hacete un cursito de plomero, son gratuitos.
Está muy pendejo para hacer plomeria, tuvo que poner 2 tees para las ventilas para que no agarre aire la tubería, cambiarla igual está muy fácil pero si van a hacer un trabajo deben de hacer un trabajo bien con sus ventilas
He was very patient and detailed in the video. I agree the caulking could have done better.. but overall he is better than other plumbers.. he will get my job
Thanks! I appreciate that. I agree the caulking wasn’t the best
Why you calling the man stupid.. he is far better than others.. he got the job done and explained what is he doing..
Thanks so much!
Easy stuff. Been plumbing for over 40 yrs.
That old 3 handle Price Pfister tub faucet you took out could've probably been rebuilt with new stems and seats. Still rebuild quite a few of them to this day and never had a problem doing it. Might have even been able to salvage the trim if you didn't go full caveman on the hot handle. Moen is a fairly good brand to replace it with, but you made it sound like you were taking out a 3 handle Moen faucet in your video headline.
I could have rebuilt that old faucet. Used a handle puller to get the handle off. Kingston Brass has the same exact faucet to replace with or just rob the stems handles sleeves and escutcheons and install them and leave the old faucet rough in valve intact.
Q
Q
Rebuilding is for the handyman, not for professional plumbers, most of us plumbers would offer a zero day warranty on rebuilding
I agree! ☝️
Sweat, press and MPT all on that diverter Swell !!!!!!
Everybody complan but for me You die a exelente job, thanks for the video
Thanks! I appreciate that
Looks really nice. Great job 🎉
Thanks!! I know it was a long video 😂
@@PlumbingRight you’re welcome. It is 😳lol! It’s okay 👍 played it until the end 😅Keep up the good work 🥳
@@happytiger8 That’s awesome! 🍿😁 Thanks for watching and the support! Will do
@@PlumbingRight 👏you’re welcome. Yeah 🍿🥤lol. Have a good one.
👍👏 You Need a Handle Puller 🙂
I thought about that today 😂
I have a Gerber three handle shower and can't wait to do this. Great job man
@@kelm1123 Thanks so much for watching!
ME GUSTO BUEN TRABAJO...GRACIAS ES BUENO APRENDER.
Thanks! I’m glad you enjoyed the video
I installed that same valve a few days ago, I liked it, I thought they couldn’t have nothing but the generic Chinese valves because of the anti scald valve law, I picked it up at Lowe’s, I wasn’t expecting it to be a Moen
That’s awesome. It’s a good valve and eazy to work on.
The set coming out was installed upside down (thus the loops in the tubing). The new o n e could have been installed right side up just as easily.
Ok, job for DIY, try not banging the fittings on, should slide on smoothly! You really should make sure it's level! It's leaning forward !You might want to clean the surface from existing caulk and then reply. Otherwise, if the customer is happy so be it ..
I’ll replace my own I learned enough of what NOT to do from this video!🤔🙄
What exactly would you do differently? Sharkbits? Everyone is a Plumbing god apparently on RUclips 🤣🤣
Cómo se te ocurre usar ese alicate para eso, aprende a utilizar cada herramienta, que bárbaro 😮
Why not use 44d to loosen it
My second time working on stems yes I didn’t pack that handle out. When I threaded it back in the stand was too far and it broke the back of the valve. I know all about that stuff. Customer wants to pay you for a brand new valve should’ve put in a single handle valve and a much more better looking dumb but that’s just me.
They didn’t want a single handle valve. They didn’t like how the plate looks.
Taping has to seal pipe end too. The fringe is another seal.
No tiene la menor idea de nada. Solo tenía que cambiar la valvula de la llave de transferencia. No tiene necesidad de cambiar toda la griferia. Que haga un curso de plomeria urgente.
Посмотрел, и убедился "руки с одного места растут"
Would you also repair the back wall?
The wall was already opened up when I got there
7: am. Dude needs to buy a Pasco handle puller to reuse handles… and yes just replace seats-gaskets, and diverted washer.. doo - doo
Not if the customer wants a new valve. I guess you’ve never stripped a seat out. Why waste your time trying to fix something. That’s plumbing 101
Moen makes this stem valves? Not price phister company's?
I installed a Moen. Phister was the one I took out
Le travail de treue
Le pega bien poca
Everything was cool until he started putting the Culkin 😅. It would have been better if he placed it on his finger.
I agree 😂 definitely not my best Caulking job
I quit after watching the bonehead trying to remove the hot-side handle with Channel Locks! Yup... there's a simple tool for the job.
Thanks for watching. It was all getting replaced so who cares how it comes out? Not me, Just get the job done. One day you’re not going to have the tool you need. I guess you’ll just give up and go home
This is hilarious!! There is a simple puller for this job!!
@@donking3020 Okay 👍🏻
Good job, however this set up is illegal in my State since 1999.
Thanks! What state are you in? I would have put a single handle valve in but they didn’t want that big repair cover.
@@PlumbingRight NJ
@@humer101 Nice! I’m in Va
May I ask you why is illegal? In Europe we don't use this thing, one lever is enough.
@@UncleHo5 It Is illegal because you do not have an anti-scalding device or a mixing valve to regulate the temperature before you enter the shower or tub.
Can a shower faucet be installed horizontally?
Yes it can
Bro nice job but you need to work on your siliconing and your soldering. It was a bit rough
Will do! Thanks for watching
Why take out the Price Pfister value when you can just go with the same value ? In my opinion the value that was there is better then the one being instill now
😊😮
I disagree.
Why don't you use a handle puller
So you probably can’t tell in the video but the screw was just stripped out. A handle puller wouldn’t work.
Este fontanero es un inexperto
🤣🤣 How? No leaks✅ Happy Customer ✅ 🤷🏻♂️
Leave him alone,he did a good job 👍✅🎉
Thanks! I appreciate that
What is the center tap for.
It’s for the shower head
@PlumbingRight I thought so but wasn't sure. Very Neat. 👌 Haven't seen a system like this in South Africa.
@@BOBBY-et9xb Thanks for watching!
Ese tipo dónde aprendió plomería
I noticed the tape measure he was using 😮😢was the one we called in our trade the dummy proof ruler 😮😢
Why does it matter what tape measure he uses? - I mean he got the job done and the customer is happy
@@Frbid2lvme are u one of those that doesn’t know how read a tape measure? I learn in grammar school
@@martinalarcon3108 that’s cute!! I bet your parents were so proud that you got a gold star in reading a tape measure in grammar school - now you grew up and can pick on others for using a random tape measure - good for you sir!! Hope you have a great day!!
@@Frbid2lvme I actually don’t use one , my eyes 👀 and sense are pretty good 👍🏻 I can guess pretty good 👍🏻
Get a better torch man .
Thanks!
You dont need mip adapters pipe will slide into valve
I’m fully aware. Did you watch the video?
En ese diámetro de tubo no ay. Que calentar el tubo. Basta con que se caliente bien la pieza
Вино Коньяк и Пиво 👍😂
Tu fais quoi Dorele?😂
Po nele una gomaa l a la llave para que no se resbale le pegay bien poco
300 degree grease is not for o ring or gasket use. Read the label you threw away. They sell actual grease for o rings.
Thanks for watching anyway
Buy a puller if you’re going to do this kind of work, have right tools so you don’t look like a moron. ….or, another option is to hire a competent plumber. 🤨😏🤭🤷♂️
I did after this video. I have 645 videos on this channel and my whole 19 years of plumbing is based on one video 😂
A ch1nga la Fria es una llave la Caliente la otra y ¿ la de enmedio que es Tibia?
The middle handle is for the water to go up to the showerhead
El de enmedio es para la regadera de arriba, para cuando vayas a la ciudad ya sepas para k es 😂
QUE ALGUIEN LE DIGA A ESE " PLOMERO."............
QUE EXISRE UN EXTRACTOR, CUANDO SE HACE DIFICIL LA EXTRACCION DEL HANDLE.
You handle remover tool
PLUMBER RIGHT ??
NEXT TIME , PUT SOME
WD 40 , BEFORE YOU START DOING ANY WORK.
😂😅😂😂Esta apretad solo
Eso se solda afuera. Y despues se enrroca.
Not a plumber
Really? Where is your Plumbing work so I can pick it apart? Definitely not on RUclips.
It was ok l give you an 8 .😊
Thanks! I appreciate that 😁 Thanks for watching.
If there was any rubber seal inside the valve it probably got cooked....
I don’t put that much heater in it. It’s fine
This guy don't know why he's doing You're supposed to have a pulley for those handles so that way you won't ruin the way he's doing Don't follow that it's not the right way to do pull those handles out
If you’re keeping the handles yes, If you know the whole valve is getting replaced, who cares how it comes off?
If you would have loosened the trim and used that to push the handle off, I have done this dozens of times. It would have saved a handle in the process. No sense being a barbarian and destroying things.
Thanks, I’ll try that next time. The whole valve was getting replaced anyway
I believe that's a Gerber 3 handle showerbody not moen
It’s a Moen 2995EP Chateau
Okay
What’s really funny to me is all these people on here saying I’m not a Plumber, when they don’t even make time to make a channel,put in the work, post it so the world can pick it apart 😂 I want everyone to make a channel in 2024 and show their skills!
next time change the blck rubber washer .. its going to cost a $2.00 and replace the handle the one you brock .. witch doesn't come out EZ
The customer wanted a new tub/shower valve. Not everything wants things fixed, especially we’re I live
The sloppiest piece of plumbing I have ever seen.
Next time you going to make a video least use the correct tools.
Most of those complainers on here don't know how to tie their boot laces. So don't heed them , the end result was it got fixed..
Thanks! That’s true and the customer is happy
You got to be jiving.
Quitale el tornillo de enfrente
Es una estafa el video no mostro como ejecuto la soldadura ascendente ..De Argentina..
You need to improve how to put the silicone.
Stick to the drumming because you ain't got plumbing down yet!
😅
Agricoltura mancata
Так себе мастер похрду😂
One job so long
How long is it supposed to take 10 minutes?
@PlumbingRight I think if we put our minds on one job at ah time it would be very quicker
Amigo de plomería nada, esa no es forma de sacar manigueta de llaves, para eso hay extractor, la has rayado toda, 😢
The tub valve was being replaced anyway
This guy is not a good maintenance person. Probably dropped the fixture because I have never in 30 years saw a fixture with bent orifices like that. Unless it was abused in some way, and judging from the way he disassembled the existing one is probably how the new one got damaged!
I have 600+ videos go watch some of them
😂
This guy has NO Clue
🤣🤣 Okay
Como plomero sos un excelente zapatero. La silicona se pone entre la pared y la griferia, no afuera de la campana. Cambiaste una griferia al dope, solo tenias que cambiar la valvula de la llave de transferencia. Un asco como trabajas, hacete un cursito de plomero, son gratuitos.
I’ve been Plumbing 20 years, Went to a 4 years school and have a Masters license. Thanks for watching anyway
Esta persona no sabe trabajar esa muletiya se quita dando unos golpezitos en la misma es una pena ver esto😮😮😮😮
Está muy pendejo para hacer plomeria, tuvo que poner 2 tees para las ventilas para que no agarre aire la tubería, cambiarla igual está muy fácil pero si van a hacer un trabajo deben de hacer un trabajo bien con sus ventilas
What tees are you talking about?
No tiene golpes de agua
What is water shocks?
35:40 no sabe ni pegar el club
O
Man macht viel verkehrt.
Probably, but the customer is happy so who cares
Le falta mucha técnica es muy pobre su forma de trabajar
No no no es cierto todo buen
I would never hire this guy to do any plumbing in my house. He is not good at what he does. Well maybe demo!
Not a moen
The new one is a Moen
آش هاذ التكليخة، هرس الروبيني وبارك تايفورسي عليه، راه مازال شادو الڤيس، خدمة ماشي بروفيسيونيل 👎👎👎
Este plomero es un fraude
Explain?
Es un aprendiz no sabe nada
I’ve been Plumbing 20 years, 4 years of schooling and have a Masters license. Show me your skills. I’ll wait 😁
So old design
Okay
С таким дерьмом я ещё не сталкивался!😂
No SEAS OFIOSO
Put behind and tap off
U r ah waist time plumber
You are a terrible Plumber
Why? Based off of one video on RUclips? I don’t see your channel on here. Maybe you’re scared 🤷🏻♂️
Отсталая страна. Весь мир включая страны третьего мира давно перешел на однорукие смесители.
Te quedó horrible
Descalificado fuera
No sirve ni para cambiar piezas
Kto tam kładł płytki?😂😂😂😂
Co za facet do wszystkiego używa żabki 😂 wali nią po międzianych kształtkach jak spawacz po szynie
Silikon to tragedia nakładany szmatą co to za technika ?😂😂😂