How to mix, pour and finish your own concrete countertops. Step by Step DIY countertops
HTML-код
- Опубликовано: 2 янв 2019
- LINKS BELOW
Easy mix design, pouring & finishing techniques. A start to finish guide for your DIY countertop project. If this video helped you on your project be sure to comment and like! Good Luck!
Preferred Sealer: amzn.to/2KLqcia
FIBER: amzn.to/2KN5q0R
Magin trowel: amzn.to/2IZdfeH
Resin Float: amzn.to/2MOOxQL
steel trowel: amzn.to/2NvWziL
I edited this footage into a how-to format showing the process and techniques I use when making a concrete countertop. I hope you can find a few useful tidbits that will help on your project! Thanks and be sure to follow along! - Хобби
Very useful - thanks!
For a not-made-for-youtube video, you sure provided me with the best video on youtube about this topic. Most of the other ones are trying to sell sinks or just DIY'ers with a series of mistakes. Thanks for this it was very helpful.
I really love your videos! Very informative and well done! After watching several and practicing on some vanity tops in forms, I'm going to try a pour in place kitchen project. Thanks, again, for sharing!!!
Great video. Thank you for all the details. I'm learning to pour in place for our kitchen. Especially like the information about the tools and techniques.
Loved your explanation and your technique! Thank you for sharing! I've been trying to get more confident to tackle our kitchen sink project and your video has definitely set me many steps closer to my DIY concrete kitchen countertop/sink... I was originally planning on just doing the sink but after seeing your project, I have a better idea... now all I need is someone to help me carry the thing once it's all done into the kitchen, lol! Thank you again!
A final completion shot would have been nice
something that helps on hot days is add icecubes , bit hard to calculate the watercontent though , maibe go by weight of water
Great great vid
Thanks for stopping by!
Nice videos, thanks for sharing your craft! Can you share a little more info about how you setup the palm sander vibrator technique? How do you attach the sander to plywood?
Good day , I am looking on how to complete the surface of the counter when you take the forms off and flip... excited to start
There are many good products available to seal the concrete. I use this product on many of my jobs: amzn.to/2udtJ1f
If you decide to sand or polish you may want to stop at 400 grit, any finer and you may lose adhesion on any topical sealers and you risk exposing aggregate. If theres anything else help with then please ask
What materials do you need and what is the mixing ratio if you want to create your own concrete mix? I want to do a white countertop and can't find a pre-mix option. So far I have white portland cement and white silica. Thanks.
What is the best concrete for countertops? Someone suggested just a sand mix, would that be bad?
Have you had success with the shrink reducer and the plasticiser? The green and blue little bags? In reading through their instructions, they claim to only be compatible with rapid set products yet the concrete is sakrete. What’s your advice on these?
Nice video. I am planning to work on a similar project for my bathroom vanity top. Can you please explain why you used portland cement powder? Is it for smooth surface?
Do you ever have a problem with ghosting where the outline of the reinforcement shows through on the finished side? If so how do you prevent it?
want to c your finishing
On that sink drain. Could a metal ring be pushed into the concrete making a perfect seal?
Yes, maybe a Stainless steel ring.
Is it possible to do a pour in place with a sink? I want to do this for my island, but it's going to be 55"x99", so I would never be able to move it or fit it through my doors if I don't do a pour in place.
what were the dimensions of the orange sink mold and the dimensions of the sink mold built around it?
I want to say 11" x 18" inside with a 1.5" wall thickness. Im going off of memory...
So does using the fiberglass keep from needing any mesh/wire reinforcements? Thanks for all the info! It’s been extremely helpful!
I use both together on all my pours
How are you attaching the sanders underneath?
I zip tie them to 10" plywood boards and then clamp those boards to my saw horses
Could you send me a picture?
Why do you never show finished job?
there are a couple pics of finished jobs in the intro. You're right though, I should make a slideshow of some finished work. Thanks for watching!
Are you a JW? I've only ever heard a JW say: "you can glean information"
ah.... meth? why are you going crazy on THE BOTTOM OF THE GD MOULD? hilarious.