@@piovo5222 four out of six came out by hand. One i got out with two screwdrivers, but u need to make sure you dont damage valve cover beacause its plastic and lot of work to change. 1 was really stuck and i did not get it out. Always do this with hot engine, and if they are really stuck and u cant get them out. Screw nuts that hold injector in engine just little bit open, like couple of turns and start the engine. When engine working thr injectors should bop up, when it does not happen in idle add very little accelerator. Never do this without nuts on injectors, cause engine compression is really strong and it may damage fuel line, block or anything.
whats that noise, happens every second sounds like a rattle snake.
If you mean that engine sound, its beacause two injectors were very bad. Idle rpm was very lumpy, bounced up and down.
@@Kuikuuu hard to get the injectors out?
@@piovo5222 four out of six came out by hand. One i got out with two screwdrivers, but u need to make sure you dont damage valve cover beacause its plastic and lot of work to change. 1 was really stuck and i did not get it out. Always do this with hot engine, and if they are really stuck and u cant get them out. Screw nuts that hold injector in engine just little bit open, like couple of turns and start the engine. When engine working thr injectors should bop up, when it does not happen in idle add very little accelerator. Never do this without nuts on injectors, cause engine compression is really strong and it may damage fuel line, block or anything.