So remote has proportional controlls? Or like you write 3 modes slow-fast-faster...?
3 года назад+2
I am not sure, I did not find any concrete description on the web, but maybe there are more steps between slow and fast. Maybe I will try to test it on some slower gear-ration, there should be the difference between speed more visible.
Hello! Tell me, please, do you know how to solve the problem of parallel operation of channels A and B for two motors from one stick? On the old remote there are buttons for switching modes, on the new one I did not find it.
Год назад
Unfortunately, I haven't solved this problem yet...
I think that's an intentional feature because for most models you tend to want to be able to roughly control a lot at once. You could use the old controller for like trains and cranes but no proportional control for fine tuned things. Or you could use mould king app and design a control layout to fit your needs with independent sliders
lol, I already bought two of these 6.0 blocks and both of them just stopped working after the first use - they worked for literally 1-2 minutes, and then died :-(. tell me how you used the block, that it works for you
2 года назад
I tested it with several motors (see in this video) and all is working well. However I did not tested it with bigger load yet.
I had a similar issue with a 4.0 and a 6.0 block. I contacted mould king and they replaced them for me. There arent buwizz, but their customer service is pretty good.
Hello, if I bought a statistic mould king 13080 and this one, can i use it on it and the car move normally or they can’t put in together? Really need to know and thank you so much
Год назад
It would be necessary to measure the dimensions if the receiver can be placed in the model.
I have the same problem, bought teh new road rescue truck with this powerbank. more than 1 power charger tried. nothing will do. Red led is blinking 1 blink a second for 7 seconds, led is red for 3 seconds and than blinks 7 tomes again /
Just as a note. There are two different Mould King apps out there. One has a a blackish icon, the other has a red one. The red icon app has a yellow interface background, and gives you multiple model profiles to start with. It will also sync with more than one control box simultaneously... somehow. I havent tried to manually do so yet. The black icon version is the same as the one featured in this video. I could not get the programming feature to work on the black icon app tho. The red icon app has a bit more control options. That app allows any one of the ports to be used as lighting controls. Meaning when you use the app, you can toggle that output for lighting controls. Then you can turn on the lights using a light button on the control screen. Only works with the APP, no way to do that with the controller from what I have tried. Toggling the apps light button will turn all selected light ports on or off. The black icon app doesnt have this feature. And Neither app lets you pair more than one motor to work on a single input. I know you can stack the connectors to do that as well. But I like the flexibility of being able to change them on the fly in the app. Oddly enough, the white controller with the two d-pad buttons and two shoulder buttons will allow motor pairing manually using input combinations. BOTH APPS HAVE BAD INPUT LAG.
I bought that thing after your video)) sadly enough in app don't works programmable functions it starts but don't show icons (start, forward and etc...) did you have such problem? and what anrdroid version of your phone?
2 года назад
I use Xiaomi Mi 9 SE with Android 11. And I use is primarily like a classic remote control and it works well.
@ but with the servo the speed is not important. I mean can you controll it's possition? For example, does half the way left with the stick coresponds to half the way right on the servo?
Год назад
@@herbertromanski9045 I'm afraid not. But maybe it's also a mistake that I didn't use Lego servo motors.
Which servos did you use? because it looks in the video like the left one is struggling to do anything but -90/0/90 degrees but the one right of it is handling all positions just fine?
can you explain what causes mouldking battery to burn with no warning? some people experienced situation when battery just died and sometimes with smoke..
2 года назад
I do not have this experience yet, my receivers are working well. Maybe too big load for the accumulator. Or maybe too strong charger, I think it is recommended 1.5 A for this.
@ 1.5A ohh. that might be clue. but how much A are using M and L sized motors? if this is case thats clearly flaw because cada technic never dies like this,cada even on more than 1.4A never burns. motors just run slower while mould king just rage in fire. .
@@stratiosastero6880 happens if you plug in the motor bad with a weird sound of that (especially if you do that when the battery box is turn on). Yeah, it was happened to me the same thing with the mould king 4.0
Probably a bad lithium cell. Some cells from china are sketchy and when lithium cells go it can be quite the show. The note 7 phones are a good example.
2 года назад
@@zillpickle8910 Thanks for the additional information.
@ Jo to vim taky ze ta starsi verze mela 7,4V , predpokladam ze tahle bude mit taky 7,4 V akurat by me ta kapacita zajimala...mam napojeny 3 buggy motory a jedno servo a baterka to v pohode utahne akorat ze se rychlo vybije :D
2 года назад
@@Matej-Brick Tři buggy motory je opravdu hodně.... je to dobrý motor, ale spotřeba je obrovská - viz www.philohome.com/motors/motorcomp.htm.
@ zdarvim ma ted problem z bateriji necham ji nabit pres noc ale jak ji zapnu do auta tak vydrži jen tak 5 min a pak je zas vybita i to nabijeni je jakesi divne mam dve tyto sady baterek ale tato kdyz se nabiji tak blika to je v poho ale za hodinu začne blikat jednou dlouze a pak třikrat rychle blikne nate druhe beteriji když je nabita tak sviti jen červene tato baterie co se vybiji nikdy nesviti ze je nabita dik za reakci
Zdravím zakúpil som tento ovládač ešte mi neprišiel, viem ze predošlá verzia štvorkanalova sa da na ovládací naprogramovať aby jeden kanál ovládal dva motory ako keby spojil kanál a a, b dokopy, , neviete či sa to dá aj s týmto ovládačom? Napr aby dva buggy motory fungovali na jednom kanáli myslím hore a dole ale pritom boli zapojené zvlášť na baterke napr kanál a, b ale aby sa na ovládací ovládali jedným smerom napr hore dopredu a dole do zadu
I didn't test this version yet, but producer promises 65 feet (about 20 meters). But I think it can be more. I tested similar receiver (MoYu brand) and it has range more than 30 meters (ruclips.net/video/2e0Wj5OdKhg/видео.html).
Já jsem buggy motory testoval jen na menších modelech a tam fungoval dobře - viz ruclips.net/video/UsDr4EPW-oE/видео.html nebo ruclips.net/video/6t63uL9gqtg/видео.html. Může být problém s napájením, testoval jsem i na bílém Porsche a tam baterie vydržela vždy jen chvíli (musela ale taky napájet dva motory současně - viz ruclips.net/video/UAbbc0m-fEY/видео.html).
3 года назад
Nemohu porovnávat. Já koupil bezejmené motory na Aliexpressu. Vyrábí je taky přímo Buvizz (buwizz.com/shop/buwizz-motor/), to by mohla být asi nejlepší alternativa. Ale nevlastním.
Lego: struggles to make this
Mould king and qihui: Ez
Vypadá výborně.❤
To ano - a i dobře slouží.
Which servos were you using? like from what brand
from various manufacturers - Lego, CaDA, Mould King.
So remote has proportional controlls? Or like you write 3 modes slow-fast-faster...?
I am not sure, I did not find any concrete description on the web, but maybe there are more steps between slow and fast. Maybe I will try to test it on some slower gear-ration, there should be the difference between speed more visible.
E
@@jasonlocke1022 no
Hello! Tell me, please, do you know how to solve the problem of parallel operation of channels A and B for two motors from one stick? On the old remote there are buttons for switching modes, on the new one I did not find it.
Unfortunately, I haven't solved this problem yet...
I think that's an intentional feature because for most models you tend to want to be able to roughly control a lot at once. You could use the old controller for like trains and cranes but no proportional control for fine tuned things. Or you could use mould king app and design a control layout to fit your needs with independent sliders
lol, I already bought two of these 6.0 blocks and both of them just stopped working after the first use - they worked for literally 1-2 minutes, and then died :-(. tell me how you used the block, that it works for you
I tested it with several motors (see in this video) and all is working well. However I did not tested it with bigger load yet.
I had a similar issue with a 4.0 and a 6.0 block. I contacted mould king and they replaced them for me. There arent buwizz, but their customer service is pretty good.
How its work with 2x monster motor at the same time? did you saw any difference with torque and speed? how much losses is Compare to 1 PCS?
I did not compared or tested. However buggy motor is very hungry...
Hello, if I bought a statistic mould king 13080 and this one, can i use it on it and the car move normally or they can’t put in together?
Really need to know and thank you so much
It would be necessary to measure the dimensions if the receiver can be placed in the model.
I have problem with 6 channels box. I can not charge it by USB charger. During charge - red light is blinking but it not charge.
Unfortunately I do not know the solution. Maybe try another charger, it is good to use recommended specifications for the charger (voltage).
I have the same problem, bought teh new road rescue truck with this powerbank. more than 1 power charger tried. nothing will do.
Red led is blinking 1 blink a second for 7 seconds, led is red for 3 seconds and than blinks 7 tomes again
/
Just as a note. There are two different Mould King apps out there. One has a a blackish icon, the other has a red one.
The red icon app has a yellow interface background, and gives you multiple model profiles to start with. It will also sync with more than one control box simultaneously... somehow. I havent tried to manually do so yet. The black icon version is the same as the one featured in this video. I could not get the programming feature to work on the black icon app tho.
The red icon app has a bit more control options. That app allows any one of the ports to be used as lighting controls. Meaning when you use the app, you can toggle that output for lighting controls. Then you can turn on the lights using a light button on the control screen. Only works with the APP, no way to do that with the controller from what I have tried. Toggling the apps light button will turn all selected light ports on or off.
The black icon app doesnt have this feature. And Neither app lets you pair more than one motor to work on a single input. I know you can stack the connectors to do that as well. But I like the flexibility of being able to change them on the fly in the app. Oddly enough, the white controller with the two d-pad buttons and two shoulder buttons will allow motor pairing manually using input combinations.
BOTH APPS HAVE BAD INPUT LAG.
I bought that thing after your video)) sadly enough in app don't works programmable functions it starts but don't show icons (start, forward and etc...) did you have such problem? and what anrdroid version of your phone?
I use Xiaomi Mi 9 SE with Android 11. And I use is primarily like a classic remote control and it works well.
can the servos be proportionaly controlled too?
It's been a while since I last used this receiver, but I think proportional speed change is possible with all motors.
@ but with the servo the speed is not important. I mean can you controll it's possition?
For example, does half the way left with the stick coresponds to half the way right on the servo?
@@herbertromanski9045 I'm afraid not. But maybe it's also a mistake that I didn't use Lego servo motors.
Which servos did you use? because it looks in the video like the left one is struggling to do anything but -90/0/90 degrees but the one right of it is handling all positions just fine?
Looks very promising for the price. Have you used it on any of your builds, under load? I'm curious to know if I could use it on my builds.
I tested it on this - ruclips.net/video/ysl5vFegDw8/видео.html. Seems to be stronger than any other chinese receivers.
How long do you charge the battery I get a flashing red green while charging and while not charging battery is red
My stop flashing between two and three hours (but there was still a little power before charging).
can you explain what causes mouldking battery to burn with no warning? some people experienced situation when battery just died and sometimes with smoke..
I do not have this experience yet, my receivers are working well. Maybe too big load for the accumulator. Or maybe too strong charger, I think it is recommended 1.5 A for this.
@ 1.5A ohh. that might be clue. but how much A are using M and L sized motors? if this is case thats clearly flaw because cada technic never dies like this,cada even on more than 1.4A never burns. motors just run slower while mould king just rage in fire. .
@@stratiosastero6880 happens if you plug in the motor bad with a weird sound of that (especially if you do that when the battery box is turn on). Yeah, it was happened to me the same thing with the mould king 4.0
Probably a bad lithium cell. Some cells from china are sketchy and when lithium cells go it can be quite the show. The note 7 phones are a good example.
@@zillpickle8910 Thanks for the additional information.
K jakému modelů od jaké značky si získal motory
Buggy
Motory kupuji většinou samostatně na Aliexpressu (CaDA, MouldKing apod.), pár mám i originál Lego.
prosim vas nevite jaka baterie je pouzita uvnitr? kapacita i volty?
Jedná se o lithiové baterie, konkrétní vlastnosti jsem zatím nenašel, ještě se podívám.
Tak více jsem zatím nenašel, starší verze měla tuším 7.4V.
@ Jo to vim taky ze ta starsi verze mela 7,4V , predpokladam ze tahle bude mit taky 7,4 V akurat by me ta kapacita zajimala...mam napojeny 3 buggy motory a jedno servo a baterka to v pohode utahne akorat ze se rychlo vybije :D
@@Matej-Brick Tři buggy motory je opravdu hodně.... je to dobrý motor, ale spotřeba je obrovská - viz www.philohome.com/motors/motorcomp.htm.
@ zdarvim ma ted problem z bateriji necham ji nabit pres noc ale jak ji zapnu do auta tak vydrži jen tak 5 min a pak je zas vybita i to nabijeni je jakesi divne mam dve tyto sady baterek ale tato kdyz se nabiji tak blika to je v poho ale za hodinu začne blikat jednou dlouze a pak třikrat rychle blikne nate druhe beteriji když je nabita tak sviti jen červene tato baterie co se vybiji nikdy nesviti ze je nabita dik za reakci
Zdravím zakúpil som tento ovládač ešte mi neprišiel, viem ze predošlá verzia štvorkanalova sa da na ovládací naprogramovať aby jeden kanál ovládal dva motory ako keby spojil kanál a a, b dokopy, , neviete či sa to dá aj s týmto ovládačom? Napr aby dva buggy motory fungovali na jednom kanáli myslím hore a dole ale pritom boli zapojené zvlášť na baterke napr kanál a, b ale aby sa na ovládací ovládali jedným smerom napr hore dopredu a dole do zadu
Tak to jsem zatím nezkoušel.
Does this one come with the motors sorry
No, the engines are just for demonstration of functionality. The package includes only the receiver and remote control.
from where did you buy it
Aliexpress.com.
whats the range of this?
I didn't test this version yet, but producer promises 65 feet (about 20 meters). But I think it can be more. I tested similar receiver (MoYu brand) and it has range more than 30 meters (ruclips.net/video/2e0Wj5OdKhg/видео.html).
Vypadá to slibně. Takže utáhne to Buggy motory atd a dělá je to i silnější ?
Mně by zajímalo protože vím co jste psal ale můj Buggy motor fake občas ani moje auto nerozpohybuje je sice rychlý ale nemá sílu
A taky se chci zeptat jestli je lepší a silnější mould king Buggy motor nebo klasický fake Buggy motor z Aliexpressu ?
Ale už nechci otravovat a předem děkuji
Já jsem buggy motory testoval jen na menších modelech a tam fungoval dobře - viz ruclips.net/video/UsDr4EPW-oE/видео.html nebo ruclips.net/video/6t63uL9gqtg/видео.html. Může být problém s napájením, testoval jsem i na bílém Porsche a tam baterie vydržela vždy jen chvíli (musela ale taky napájet dva motory současně - viz ruclips.net/video/UAbbc0m-fEY/видео.html).
Nemohu porovnávat. Já koupil bezejmené motory na Aliexpressu. Vyrábí je taky přímo Buvizz (buwizz.com/shop/buwizz-motor/), to by mohla být asi nejlepší alternativa. Ale nevlastním.
need a link to buy it , love to modify things :D
Just try Aliexpress and search for "mould king". Three first results are this remote control (in my browser and with my cookies).
I have it from this seller - www.aliexpress.com/item/1005002876913933.html?spm=a2g0s.9042311.0.0.7f074c4dVI6FQ2. But maybe you will find cheaper.
Ahoj potřeboval bych poradit chtěl bych 1-2 originální buggy motory klidně z bazaru nejlíp 1 cca 500-1000 Kč
Už mám jeden fake Buggy motor a protože nemám buwizz tak toho jedem moc netáhne
Všechno možné se dá sehnat na Bricklink.com. Já má jen falešné buggy motory a docela jedou, jen mají také hodně velkou spotřebu.
Я один русский
Да