Install air bag suspension by Ridetech “Cool Ride” for 3rd gen Camaro and Firebirds. Ridetech front link: www.ridetech.c... Rear link: www.jegs.com/i...
Just spent about 5 min scrolling thru your IG to discover where you are and I was correct! I've only watched 1-1/2 of your air suspension videos but something told me Florida. (Not a dig) Love the vids so far
Great install brother. Looks great. Looks like it rides great. The rear install seemed very simple. The front with some modification still didn't look to bad to install. They did a great job engineering the parts to make it as simple and safe as possible. But dang cutting the k member lip off looked real fun lol. Great job!!! Keep the videos coming
Thanks bud!!! Yeah not too bad, with a plasma cutter would have been cake lol 😂 luckily no leaks so far! I have it about the ride height I want for cruising so I’ll need to get it aligned at that height. Thanks for hanging out!
When you get your new rearend, check the dimension of the inside of the spring mount that the bottom of the bag goes in. With the strange rearend, that hole has a much smaller I.D. due to them using a thicker pipe for that spring mount. O.D. is the same as factory. It’s much easier to grind bigger beforehand if need be. Looks nice! Keep up the great work!
Thanks for the tip bud! I didn’t realize the pocket was a little different. I think the air springs are a little smaller but I’ll be ready to mod that if needed.
Love this install man! You did it almost exactly the same way I did. Watching your videos makes me want to finish all the BS with mine. I’ve had a bunch going on right now and just don’t have the time or motivation and watching these makes me want to get going again. Seeing it sit in the garage makes me sad enough. Haha thanks again! RJ from AR
I’m super happy with the setup so far. I really want to get some double adjustable shocks and struts and dial in cornering but it seems really I’m control as is
Maybe some sleeving for the air line would help protect it ja? Also, may be worth your while to looking into some little hose clamps to keep that line in place and protect from rubbing? The ones I use are stainless steel and have a rubber covering on them to protect your lines. This is so cool to watch man! Thank you for sharing you install!
Where did you get that airbag kit for the front of that Camaro I have an 83Z 28 that I need to do that to for my exhaust is too low to the ground and I want to raise the front of my car
Great video!! Love watching your content. Do you have plans for your old springs? I just did a 5.3 swap in my firebird and it has v6 springs and I want to lower it. Just curious if you would be looking to sell them.
I’ve been known to completely redo things so that is very possible lol. So far, for what I do with the car, they have been incredible!!! Love bringing the car up and street cruising ride is amazing.
The bob ross of airbags,,,, 🤣 “nice little swivel fitting here”
😂 my editing team (me) made me say that 😆
Just spent about 5 min scrolling thru your IG to discover where you are and I was correct! I've only watched 1-1/2 of your air suspension videos but something told me Florida. (Not a dig) Love the vids so far
Thanks! Yup in Tampa FL… thanks for hanging out on the channel
Great job brother!!! That's a straight forward install, the kit really makes it look easy.
It really was engineered very well for our cars. Cutting the tip pocket was the trickiest part but still not bad.
@@FireballMullet I could see this set up in my future
It looks like it rides a lot smoother. Especially the way u went over that speed bump.
500 percent better lol 😂 of course this is coming from Eibach Sportlines which I always felt like it was pretty rough
That’s One BAD ROC!
Thanks!!!
I need your help 1st Gen chevy coupe, your video is the closest reference to something I got 😂
Great install brother. Looks great. Looks like it rides great. The rear install seemed very simple. The front with some modification still didn't look to bad to install. They did a great job engineering the parts to make it as simple and safe as possible. But dang cutting the k member lip off looked real fun lol. Great job!!! Keep the videos coming
Thanks bud!!! Yeah not too bad, with a plasma cutter would have been cake lol 😂 luckily no leaks so far! I have it about the ride height I want for cruising so I’ll need to get it aligned at that height. Thanks for hanging out!
@@FireballMullet no problem. Ya haha that would have probably made it a little easier. And ya that's good thinking about the alignment.
When you get your new rearend, check the dimension of the inside of the spring mount that the bottom of the bag goes in. With the strange rearend, that hole has a much smaller I.D. due to them using a thicker pipe for that spring mount. O.D. is the same as factory. It’s much easier to grind bigger beforehand if need be. Looks nice! Keep up the great work!
Thanks for the tip bud! I didn’t realize the pocket was a little different. I think the air springs are a little smaller but I’ll be ready to mod that if needed.
Love this install man! You did it almost exactly the same way I did. Watching your videos makes me want to finish all the BS with mine. I’ve had a bunch going on right now and just don’t have the time or motivation and watching these makes me want to get going again. Seeing it sit in the garage makes me sad enough. Haha thanks again! RJ from AR
Hope you get back at it! Just pick something easy to get ya out there. Thanks for watching!
I love you car man. I have been thinking about doing this to my car for a long time. Keep up the good work!
Thank you! I really appreciate the feedback on the channel!
That’s awesome. I believe I’ll do this on my new 85 ws6 FireAm build.
I’m super happy with the setup so far. I really want to get some double adjustable shocks and struts and dial in cornering but it seems really I’m control as is
Maybe some sleeving for the air line would help protect it ja? Also, may be worth your while to looking into some little hose clamps to keep that line in place and protect from rubbing? The ones I use are stainless steel and have a rubber covering on them to protect your lines. This is so cool to watch man! Thank you for sharing you install!
Yep, I did some loom on most of it. I think it’s going to work great and trouble free.
@@FireballMullet I can't wait to see more of it!
That car is amazing
Salute to fireball you always bringing that pressure.
Thanks! I’m really happy with it so far for sure!
Dreaming about the Z28 in ma sleep
👍
Looks awesome..
Thanks bud!
Woohoo 🙌,love my 87 trans,u look'in good...
Thanks!! I really appreciate that!
Where did you get that airbag kit for the front of that Camaro I have an 83Z 28 that I need to do that to for my exhaust is too low to the ground and I want to raise the front of my car
Awesome Camaro! What wheels are you running? The car looks amazing
US Mags U550 forged
No airbags in my Firebird. I die in *style*
Definitely a preference thing! Thanks for watching
That`s sexy when air`s down. I would not do that to my car But it is sexy ..
Man I love those wheel who makes them
US Mags u550 forged Irocs
Love this car I want one bad!!!!!
Thanks man!
wow.. bad ass car
Thanks 🙏 I really appreciate that! Thanks for hanging out on the channel
Clean installation!👍🏼👍🏼
Thanks, it’s always nerve racking making cuts lol
Great video!! Love watching your content. Do you have plans for your old springs? I just did a 5.3 swap in my firebird and it has v6 springs and I want to lower it. Just curious if you would be looking to sell them.
Thanks! I sold the airings already to a subscriber.
@@FireballMullet Great! Thanks for the reply.
Rear kit is discontinued anyone can suggest an alternate option? Cheers
Time to get low! Looks killer man
Thanks man!
What coils did you have before air ride?
I had Eibach Sportlines
I just ran across this channel, can someone tell me if he has a video explaining his wheel set up?
I have one video but they are US Mags U550 forged Irocs
Cool
Thanks! 🙏
The rear kit is discontinued 😢
Oh wow?!?! I’ll look, I hope not!
I will buy it give me a price
I think you made a mistake, everyone I know who went bags ends up pulling them out again.
I’ve been known to completely redo things so that is very possible lol. So far, for what I do with the car, they have been incredible!!! Love bringing the car up and street cruising ride is amazing.