How to change your Toro Snow Blowers Oil. It is super easy. You will need a 10 mm wrench, something to catch the oil and 5w 30 cold weather start oil 1 quart.
Thanks for taking the time for this. I have a Power Max 724 OE. Saw somewhere you take the wheel off the oil spout side so it leans. Good idea until it's a couple of years old, you don't have a wheel puller and the wheel is stuck on the axle. Love this machine.
Thanks. I just got a Toro Power Max, and when I saw the oil discharge spot was right over the wheel, I was sure of the best was to handle it. The milk jug is a good idea, though when the time come for an oil change ( I have only run the blower once so far ) I hop can can jury-rig some some way to capture all the oil without having to be bent over or crouched down the entire time. However, it is good to know the milk jug fits.
I've always been baffled why Toro puts the drain tube on the side. Even with the old Tecumseh Engines they did that and that engine could be ordered with it coming out the back as every other snowblower manufacturer did at the time. I think the only one Turtle has with the tube sticking out the back is the single stage model with the personal pace system as the engine is actually turned on its side.
Thanks for the video. I usually put a cement block under the left wheel to tilt it over some... I have the 1028 and will be using it tomorrow during this storm in southern N. H.
hey been looking up videos because we just had our first snow and my snowblower stopped working. I'm gonna give her an oil change and a new spark plug but I was concerned when I took the spark plug off inside the hole was what looked like a bunch of black junk build up. is everything gonna be okay when I change the spark plug and oil or am I gonna have to learn some snowblower heart surgery and dismantle the engine and carb for a deep cleaning?
1:11...you dripped.
Ha ha, sorry guy, great video....I just had to be that a-whole!!
My feelings are not hurt. Lol. You are spitting facts
Exactly the video I needed at this moment. Thanks!
Thank you very much quick and to the point - I can do this on my own now!!!
Some bullshit placing the outlet over the tire. Powder coat on their recent hardware is a joke as well.
At 1:10 you dripped a drop... At 1:16 you say you haven't dripped one drop yet, lol.
What is the plug next to the oil plug? On mine, it's a gray cap
Thanks for the video, just what I needed!
Small engine oil has zink
Love all your videos!
You are to kind. Thank you!
Thank you! I got the 824 oe. Love toro! Got to do oil change next year
The oil change is pretty easy. Good luck
Good video thanks I am about to go change the oil on my
Super easy
Thank you. It's amazing some of the details the manual leaves out, like the socket size you need to remove the plug.
Hey I never use the cord I start wit the power button!! I keep the cord jus in case I lose power !! But deft helpfully vid thx
Thanks for taking the time for this. I have a Power Max 724 OE. Saw somewhere you take the wheel off the oil spout side so it leans. Good idea until it's a couple of years old, you don't have a wheel puller and the wheel is stuck on the axle. Love this machine.
You should put anti seize on the drive axle every year. No issues taking the wheels off.
I'd tilt the machine and put a 2x4 under the lift side. Seems a liddl; easier.
I have a Toro Powermax 828. How do I go about draining the gas tank on this model?
When if your snowblower don't runna
Why would they give you a extended warranty for a kit
Time stamps 1:10 and 1:16, good stuff
Nice vdo with good details
Great video, very informative
Good job explaining, very helpful 👌
Thanks. I just got a Toro Power Max, and when I saw the oil discharge spot was right over the wheel, I was sure of the best was to handle it. The milk jug is a good idea, though when the time come for an oil change ( I have only run the blower once so far ) I hop can can jury-rig some some way to capture all the oil without having to be bent over or crouched down the entire time. However, it is good to know the milk jug fits.
I've always been baffled why Toro puts the drain tube on the side. Even with the old Tecumseh Engines they did that and that engine could be ordered with it coming out the back as every other snowblower manufacturer did at the time. I think the only one Turtle has with the tube sticking out the back is the single stage model with the personal pace system as the engine is actually turned on its side.
4 cycle, Yea, but what about a Toro 2 cycle single stage. Seems to be no crankcase drain.
2 stocks The oil is mixed in with gass...NO NEED to change..But need get te moxture right..
Thank you
Away toro
Thanks for the video. I usually put a cement block under the left wheel to tilt it over some... I have the 1028 and will be using it tomorrow during this storm in southern N. H.
Great snow blower. Great idea with the block. I hope you are ready for the snow
@@thetoolsman49 Yep, I was ready and my Toro worked beautifully, still snowing now as I type.... Tomorrow is another day...
hey been looking up videos because we just had our first snow and my snowblower stopped working. I'm gonna give her an oil change and a new spark plug but I was concerned when I took the spark plug off inside the hole was what looked like a bunch of black junk build up. is everything gonna be okay when I change the spark plug and oil or am I gonna have to learn some snowblower heart surgery and dismantle the engine and carb for a deep cleaning?
I hope so. I would just try it.
"I haven't dripped one drop yet"; Oh contraire young man! View your footage at approx. 1 min. & 8 sec. in. LOL