That was quite a fiddly little camera . I am impressed that you were able to get that working again ! Especially when I think they are probably not meant to be taken apart . Thanks for sharing your beautiful property with us , absolutely gorgeous!😊
Your dexterity is most envious, tiny parts even under my giant mag glass is the most troubling part of working on things. Fat fingers and old age don't help much either😒 Great repair, surprised you found the card slot module for sale, good old Ali. $400 camera for $20, not a bad deal bro. Landscape is breathtaking there, Wales or thereabouts I'm guessing?, beautiful country. Thanks for the video, well done and results were super. Enjoy the camera. See ya soon.
exactly what I was going to say, but i thought i'd wait till the end of the video before i commented in case he did just that, been there done that and looked like a twit..🤣🤣🤣
But spray it with water as you grind it as a bit that small will heat up fast and lose it's temper. A great repair, the next one will be easier now you know some of the secrets to disassembling the little devils :) They give remarkable results don't they? Good luck with the farm, things are tough for you guys. Just a hobby farmer myself.
@@BuyitFixitin the past I've also had success with opening the T3 hole with a precision hand drill to slightly smaller than a T5, then gently hammer a T5 into the round hole, the splines should cut their own shape in the screw head. It works with any size torx or hex that's rounded out as well, drill it up a size or 2 and hammer a bigger torx bit in
Getting things apart and back together again is getting harder and harder these days. They are not making stuff repairable that’s for sure. That’s some beautiful scenery to wake up to. I love your channel. Keep it up it’s the best entertainment on the tube.
Thank you very much for that 👍Yes it was a nice day that day, although sometimes the weather up here can be quite brutal, wind, rain, and snow in the winter!
Internal design wise, it's amazing how little seems to have changed in this gopro compared to the older hero 5 black. I purchased a faulty gopro, where someone had inserted the sd card _next_ to the sd card slot (really easy mistake to make when looking at the design!), and that completely shredded the screen ribbon. One new screen later, it worked!
Nice 👍It's the first time I've ever looked at one. It seemed very cheap so I thought I'd take a chance. I was quite surprised when it turned on! I was expecting water damage or something and the SD to be just a side issue (you know what some of these sellers are like on eBay 😂😂😂)
Oh Christ, a double "Plastic Plectrum" case removal job..... OOOHHHH it sounds like a rather painful medical procedure 😵😵😵😵😵🤣🤣🤣🤣🤣 Anyway, thanks for another great video Canny Lad. Wayne, Nina & Barbara. 👍👍👍👍👍👍👍👍👍👍👍👍
I do a lot of electronic work here and most of my problem is what you do and trying to figure out what is wrong with it. I have pretty much everything I need except for the oscilloscope which is kinda pricey here in the states but I made do with what I have tho.
Wow reminds me of when I was based at Otterburn ranges, I used to hike all over the place sometimes wandering to over Carlisle way or over to Hexham where me uncle still worked at the bank there or up into Acomb Fell and set up camp and just chill for couple days with tent, cooker on the go for me tea and a little radio to remind me of humanity. Had immense fun around old Haltwhistle station as it was back then still fairly intact just no tracks :D Also walked the old line up to Kielder water very pleasant then back to base and shouted at by the sergeants hehe
Afraid I had deserted you for some time, playing catch up now. You never cease to amaze me at the stuff you fix, have often wondered if you have a failure rate. I think I remember a couple of things you didn't manage to fix. I also keep wondering if it is worth moving house, just to be closer to you 🙂Another great video, on to watching the next.
Good job , well done . I have a suggestion, wouldn't it be easy to modify the chassis in order to fit a removable battery instead of an non removable one ? Maybe by ordering a chassis from another GoPro and putting it together ?
None of the damage was caused by a child "jamming" an SD card in that camera. All of the damage happened when ham-handed adult panicked and went all Hulk-Smash on the card slot trying to get it out to help rescue their Instagram shoot.
I did a few videos on this a while back have a look there was a set of 4. Sometimes parts in a pcb will give false readings due to other components in the circuit, so best to remove if you are not sure.
@@BuyitFixit I did see all 4 a couple days ago but in ur video 2000W Pure Sine Inverter. At minute 7:06 u did a couple very quick transistor checks but I did not understand how.
Nice fix! However, you may find over time that that seal between the glass & lens isn't to make it waterproof as such, but moisture-proof, hence condensation build-up between the two may become an issue no matter where you use it, indoors or out :(
@@BuyitFixit Hmmm.. I wonder how feasible it would be to adapt a cheap kitchen vacuum sealer unit into something you might use for this sort of thing..?
*Hail!* Not a cent wasted, when all see & learn. "Read instructions", needed at times. Awesome view, animal make the scenery. Saw your photo of Valais lambs few months ago, left comment, but gone now. hmm YT. My Uncle had 'small'^ homestead, baby lambs inside that time of year, too. Much Fun! Thanks for video. All the best, *Cheers!* ^ what is 'small'? : }
Thanks 👍 Not sure about the YT comment, strange. We only have a small homestead too around 30 acres, although as you say that might be large compared to others.
@@BuyitFixit If animals are happy and Garden grows well, All Good. : } With barn[s], trees, creek, & land to run, enough for all to Play. a bit of rant - very troublesome ... - just keep [US] tyrannical government from invading, as what's happening here. Pennsylvania Amish Farm[s] suffering much abuse, to point govt. (hints) threat re: [animals & disease]. Case on going, Amos Miller has Great Attorneys; Tyrants will lose. this Too, Teaches all ...
The point where the camera glass was taken off and it wasnt suppose to be taken off was the point i would if threw the camera in the garbage lol Nice break down though about to get this same camera from a friend and was wondering if it was possible to swap the vattetry when it dies but dont seem worth all the tuble
Still works fine, just not waterproof to xx meters any more which isn't an issue for me. Yes not the easiest device to replace the battery on unfortunately.
@@BuyitFixit it's a nice title camera just picked the one my buddy had told me it wouldn't turn on I pressed on the power button and it turned on 😂 but then it wouldn't accept the SD card turned out the SD card was giving the camera issues with turning in
No. There used to be a subsidy for having land but even that is stopping, but because we only have 30 acres it wasn't much anyway. The sheep are more to keep the grass down than make any money.. Part of the reason why we got a few different rare breeds such as the Black Nose Valais.
Excellent job!! Those tiny fiddly connectors and parts always give me palpitations, my meat-hooks weren't made for working on such delicate things...🤣🤣🤣
Cheers mate 👍Yes sometimes I struggle too, my hands are usually quite rough from doing things on either cars / tractors or just generally around the farm!
@@BuyitFixit by the way, every time you say "round the outside", about screws or clips, in any of your videos, like at 6:53 in this video all I can hear is Eminem in my head. In much the same way I hear Zombie by The Cranberries when anyone mentions "in their head", as I've just done... 🤣🤣🤣 ruclips.net/video/YVkUvmDQ3HY/видео.htmlsi=6xMziqeruNWdNMSu&t=13
Thanks! 👍 Yes I did try to look at the how to disassemble it first, but there wasn't too many videos out there for the silver 7. One was a guy using a dremel and the other guy used a tool and it just seemed to pop off (I thought it must have been clipped on after watching him do it) so I pretty much did the same as what he did 😥
Cheers Fred. Now that lambing is finished I should have a bit more time to get a proper look at your item. Those track repair strips came, but they are bloody tiny! more for like an HDMI socket, so I might have to resort to using wire like you did.
I'm not a fan of them as I like to feel how tight screws are so they don't strip in things like plastic. Although I've an impact driver, which I use all the time and that's brilliant for removing and putting screws into wood.
I have an old Hero 4 Silver and it came with a clear plastic waterproof case. The camera ISN'T waterproof on its own, so the later ones may well be the same. Maybe somebody who's got one can confirm this?
I just did a quick search and from the hero 5 they seem to be waterproof down to 10 meters with the side door closed (it's missing on this one but you can buy replacements).
Yes, that would probably be the correct way to disassemble it. I thought the lens and plastic part must have just been clipped after watching another video on disassembly. If I do another I'll definitely try to remove the glass first now I know how it's assembled 👍
I thought it was just clipped on, most things these days are just clipped together with plastic clips, and it honestly didn't take a lot for force. You live and learn I guess...
That looked like hard work to get into, nicely done as always Mick!
Cheers Vince 👍
Beautiful countryside ❤
Thanks 😊👍
Nice fix and beautiful scenery on the test footage :)
Cheers Mr JSV 👍
Mick, what a beautiful farm you care for and live on! Thanks for showing the insides of the gopro... always wondered how they were put together.
Cheers mate 👍You're very welcome 🙂
Another kind of magic. As always, another great find and fix.
Thanks again!
Cheers 👍
That was quite a fiddly little camera . I am impressed that you were able to get that working again ! Especially when I think they are probably not meant to be taken apart . Thanks for sharing your beautiful property with us , absolutely gorgeous!😊
Thanks 👍 It's nice in the summer, it can be very bleak in the winter months!
Well done Mick, a bargain, the farm is looking good 😀
Cheers Mike👍
Your dexterity is most envious, tiny parts even under my giant mag glass is the most troubling part of working on things. Fat fingers and old age don't help much either😒 Great repair, surprised you found the card slot module for sale, good old Ali. $400 camera for $20, not a bad deal bro. Landscape is breathtaking there, Wales or thereabouts I'm guessing?, beautiful country. Thanks for the video, well done and results were super. Enjoy the camera. See ya soon.
Cheers Terry👍, Cumbria in North of England. My fingers / eyes and old age don't help much either!
Brilliant fix Mick, still a pretty good camera it looked great thanks for the upload 😊
Cheers Gary 👍
Grind the worn part off your T3 bit Mick. Take it back down to a healthy shape
exactly what I was going to say, but i thought i'd wait till the end of the video before i commented in case he did just that, been there done that and looked like a twit..🤣🤣🤣
Great idea, cheers guys 👍
But spray it with water as you grind it as a bit that small will heat up fast and lose it's temper.
A great repair, the next one will be easier now you know some of the secrets to disassembling the little devils :) They give remarkable results don't they?
Good luck with the farm,
things are tough for you guys. Just a hobby farmer myself.
@@roy2689 lol ! ditto !
@@BuyitFixitin the past I've also had success with opening the T3 hole with a precision hand drill to slightly smaller than a T5, then gently hammer a T5 into the round hole, the splines should cut their own shape in the screw head. It works with any size torx or hex that's rounded out as well, drill it up a size or 2 and hammer a bigger torx bit in
Those connectors are a bit fidgety, but I usually have no problem with them. It's the antenna connectors that irritate me 😊 Great work 🍻
Thanks 👍Yes I think these and the antenna connectors are both fidgety!😂😂😂😂
Getting things apart and back together again is getting harder and harder these days. They are not making stuff repairable that’s for sure. That’s some beautiful scenery to wake up to. I love your channel. Keep it up it’s the best entertainment on the tube.
Thank you very much for that 👍Yes it was a nice day that day, although sometimes the weather up here can be quite brutal, wind, rain, and snow in the winter!
Internal design wise, it's amazing how little seems to have changed in this gopro compared to the older hero 5 black. I purchased a faulty gopro, where someone had inserted the sd card _next_ to the sd card slot (really easy mistake to make when looking at the design!), and that completely shredded the screen ribbon.
One new screen later, it worked!
Nice 👍It's the first time I've ever looked at one. It seemed very cheap so I thought I'd take a chance. I was quite surprised when it turned on! I was expecting water damage or something and the SD to be just a side issue (you know what some of these sellers are like on eBay 😂😂😂)
great fix mate, I'm jealous of those views mate in the end shots!
Thanks 👍
An excellent tricky fix. And unless I'm mistaken Northumberland's looking great too. Thanks for sharing.
Thanks Brian 👍Close...we're just outside of Northumberland, more North Pennines (Cumbria).
My experience several years (decades) ago was access to replacement parts. Great repair!!!
Cheers 👍Yes it's usually a lot easier to get replacement parts these days from the likes of ebay or aliexpress.
Oh Christ, a double "Plastic Plectrum" case removal job..... OOOHHHH it sounds like a rather painful medical procedure 😵😵😵😵😵🤣🤣🤣🤣🤣
Anyway, thanks for another great video Canny Lad.
Wayne, Nina & Barbara.
👍👍👍👍👍👍👍👍👍👍👍👍
😂😂😂Cheers 👍
I did not expect to find this kind of video. A great job of filming and commenting all along
Thank you 👍🙂
Great fix. You make it look pretty easy.
Thanks 👍
I do a lot of electronic work here and most of my problem is what you do and trying to figure out what is wrong with it. I have pretty much everything I need except for the oscilloscope which is kinda pricey here in the states but I made do with what I have tho.
Might be worth even getting one of those little Amazon DSO scopes. They aren't great but they only cost around £20-30.
Im new here and i find you're the best thanks for your afford
Cheers 👍
Wow reminds me of when I was based at Otterburn ranges, I used to hike all over the place sometimes wandering to over Carlisle way or over to Hexham where me uncle still worked at the bank there or up into Acomb Fell and set up camp and just chill for couple days with tent, cooker on the go for me tea and a little radio to remind me of humanity. Had immense fun around old Haltwhistle station as it was back then still fairly intact just no tracks :D Also walked the old line up to Kielder water very pleasant then back to base and shouted at by the sergeants hehe
Haltwhistle is about 20 miles North of me. We sometimes get "takeaway" from the chippy there as there isn't much around where we live.
Afraid I had deserted you for some time, playing catch up now. You never cease to amaze me at the stuff you fix, have often wondered if you have a failure rate. I think I remember a couple of things you didn't manage to fix. I also keep wondering if it is worth moving house, just to be closer to you 🙂Another great video, on to watching the next.
Cheers Chris 👍yes I'm still here fixing stuff 😂😂😂
Awesome work.
Thank you! Cheers!
I wonder if you could sand your rounded off T3 bit down to expose a fresher profile
Good Idea Nick 👍
I wonder if they use MIPI connections, like laptops all have unique LVDS connectors, but mipi is just 24, 30 or 60 - [ for the imx585 ].
I'm not sure, I didn't really look at the camera sensor part.
That was a very interesting video, mate. It is like miniature surgery. 👌👌😊😊
Cheers mate 👍
Fiddly but awesome result.....cheers. !!
Cheers Andymouse 👍Fiddly definitely😂😂😂
Very nice repair lovely job.
Thank you very much!
An Amazon Basic card in a GoPro? Numbnuts! 🤣
As always, an entertaining vid. 👍
Thanks 👍
Good job , well done .
I have a suggestion, wouldn't it be easy to modify the chassis in order to fit a removable battery instead of an non removable one ?
Maybe by ordering a chassis from another GoPro and putting it together ?
Thanks 👍I'm not too sure if that would work or not. This was the first time I've had anything to do with Go-Pro's.
For such a price and parts this is a very good camera to have in collection.
Cheers 🙂👍
You can file the tip of your torx bits. 👍
Good tip!😂😂😂😂👍
Heya nice repair love it
@@Dutch_off_grid_homesteading Thank you 👍
I highly recommend using Rose's metal instead of low melting solder. It is basically the same but only costs a fraction!
Thanks for the tip. I'll look into that 👍
Those cameras are still going for upwards of $300 Canadian on the resale market. Great work!
Cheers 👍
None of the damage was caused by a child "jamming" an SD card in that camera. All of the damage happened when ham-handed adult panicked and went all Hulk-Smash on the card slot trying to get it out to help rescue their Instagram shoot.
😂😂😂😂😂
😂😂😅😅
I've encountered this behavior many times with sd slots on laptops
Cut the torx bits down with a dremel if they round off 👍
Cheers for the tip Dean 👍a few others mentioned the same.
Can u do a video on how to test components in a PCB. Like when a transistor is bad vs good etc.
I did a few videos on this a while back have a look there was a set of 4. Sometimes parts in a pcb will give false readings due to other components in the circuit, so best to remove if you are not sure.
@@BuyitFixit I did see all 4 a couple days ago but in ur video 2000W Pure Sine Inverter. At minute 7:06 u did a couple very quick transistor checks but I did not understand how.
Sehr guter Job, danke. LG
Danke 👍
Nice fix! However, you may find over time that that seal between the glass & lens isn't to make it waterproof as such, but moisture-proof, hence condensation build-up between the two may become an issue no matter where you use it, indoors or out :(
Good point. I've got some Aquasure or I could always run a smear of silicone around it.
@@BuyitFixit Hmmm.. I wonder how feasible it would be to adapt a cheap kitchen vacuum sealer unit into something you might use for this sort of thing..?
Looks like you live in a beautiful place! Where do you live? BTW- Nice job on the GoPro. 👍 Really like your video's - Subscribed a few months ago.
Thanks! 👍 Cumbria, near the North Pennines.
@@BuyitFixit - Thanks!
@@BuyitFixit That's a canny trek into Gateshead for your repair cafe stints
There's a one not far in Alston 😉
*Hail!* Not a cent wasted, when all see & learn. "Read instructions", needed at times.
Awesome view, animal make the scenery. Saw your photo of Valais lambs few months ago, left comment, but gone now. hmm YT. My Uncle had 'small'^ homestead, baby lambs inside that time of year, too. Much Fun! Thanks for video. All the best, *Cheers!*
^ what is 'small'? : }
Thanks 👍 Not sure about the YT comment, strange. We only have a small homestead too around 30 acres, although as you say that might be large compared to others.
@@BuyitFixit If animals are happy and Garden grows well, All Good. : } With barn[s], trees, creek, & land to run, enough for all to Play.
a bit of rant - very troublesome ...
- just keep [US] tyrannical government from invading, as what's happening here. Pennsylvania Amish Farm[s] suffering much abuse, to point govt. (hints) threat re: [animals & disease]. Case on going, Amos Miller has Great Attorneys; Tyrants will lose. this Too, Teaches all ...
And STILL 😂👍the undefeated fixer champion👍
😂😂😂😂👍
26:15 Looks like heaven on earth oh my god!
On my first navy cruise, I woke up one morning and went topside to see the most beautiful green hillside near Greenock, Scotland (June 1971)
Yes, glorious the last couple of days. It can be very bleak (wind / rain / cold) up here as we are 1500ft above sea level.
How long did the module take to arrive
It was quite quick. Only about a week 👍
In Canada they are worth about $216.00 on Amazon / Thats about 123.30 Pounds your currency. So you still got a good deal at 9 pounds
Thanks for letting me know 👍
Hi I have a power supply for a notifier id3000 fire panel which as stopped working just wondering if you won't to take a look at it for your channel
Sure. Drop me an email at the channels name at out look dot com 👍
Incredible amount of internal damage to that SD card reader, so the sellers explanation seems a bit off. Great work as usual!
Cheers 👍yes it was well mangled!
The point where the camera glass was taken off and it wasnt suppose to be taken off was the point i would if threw the camera in the garbage lol
Nice break down though about to get this same camera from a friend and was wondering if it was possible to swap the vattetry when it dies but dont seem worth all the tuble
Still works fine, just not waterproof to xx meters any more which isn't an issue for me. Yes not the easiest device to replace the battery on unfortunately.
@@BuyitFixit it's a nice title camera just picked the one my buddy had told me it wouldn't turn on I pressed on the power button and it turned on 😂 but then it wouldn't accept the SD card turned out the SD card was giving the camera issues with turning in
Do you still get subsidy's for your live stock production, they were stopped here in the early 80s New Zealand that is ?
No. There used to be a subsidy for having land but even that is stopping, but because we only have 30 acres it wasn't much anyway. The sheep are more to keep the grass down than make any money.. Part of the reason why we got a few different rare breeds such as the Black Nose Valais.
@@BuyitFixit Nice response thanks
Wondering how you keep that blue mat so clean 😂. Mine is a mess every fix.
Small Milwaukee vacuum, then IPA with some kitchen roll 🙂👍
"Hot Snot" love this expression for hot glue😂😂😂😂
😂😂😂👍
The Army had something called Rhino Snot while I was in. It could be used to create something along the lines of a helipad by mixing it with sand.
Happy days.
Indeed!
Excellent job!!
Those tiny fiddly connectors and parts always give me palpitations, my meat-hooks weren't made for working on such delicate things...🤣🤣🤣
Cheers mate 👍Yes sometimes I struggle too, my hands are usually quite rough from doing things on either cars / tractors or just generally around the farm!
@@BuyitFixit by the way, every time you say "round the outside", about screws or clips, in any of your videos, like at 6:53 in this video all I can hear is Eminem in my head. In much the same way I hear Zombie by The Cranberries when anyone mentions "in their head", as I've just done... 🤣🤣🤣
ruclips.net/video/YVkUvmDQ3HY/видео.htmlsi=6xMziqeruNWdNMSu&t=13
@generaldisarray 😂😂😂😂😂
Oh dear, seeing the frame for the protection glass being pried off was tough to watch :D Great repair otherwise, as always!
Thanks! 👍 Yes I did try to look at the how to disassemble it first, but there wasn't too many videos out there for the silver 7. One was a guy using a dremel and the other guy used a tool and it just seemed to pop off (I thought it must have been clipped on after watching him do it) so I pretty much did the same as what he did 😥
Not made to fix that one, well done.
Cheers 👍
What a coincidence... I bought one on ebay to repair too lol
Nice one 👍 Hopefully you don't make the same mistake I did when disassembling the front lens cover 😂😂😂
14:17: "One moment, please" :) Just like Big Clive puts it, even though the follow up is immediate :D
😂😂😂😂👍
I have always wanted to know what makes the GoPro work. Now I don't have to open up mine. Thank you lol
Cheers Fred. Now that lambing is finished I should have a bit more time to get a proper look at your item. Those track repair strips came, but they are bloody tiny! more for like an HDMI socket, so I might have to resort to using wire like you did.
So you have a farm?
Yep
@@BuyitFixit wow what a lovely place
You ever consider getting a small electric screwdriver?
I'm not a fan of them as I like to feel how tight screws are so they don't strip in things like plastic. Although I've an impact driver, which I use all the time and that's brilliant for removing and putting screws into wood.
Life is good when your neighbor is 600 acres away.
😂😂😂😂Our closest neighbour is about 1/4 mile away.
I have an old Hero 4 Silver and it came with a clear plastic waterproof case. The camera ISN'T waterproof on its own, so the later ones may well be the same. Maybe somebody who's got one can confirm this?
I just did a quick search and from the hero 5 they seem to be waterproof down to 10 meters with the side door closed (it's missing on this one but you can buy replacements).
@@BuyitFixit Ah right, I didn't know that. Great job on the repair btw!
If that is your garden , you live in heaven...
Agree it is nice but today I''ve just been out twice with a large 15L backpack spraying weeds and it's not even 1/4 done 😂😂😂
@@BuyitFixit😁🐝🐝
Tell me you’re from the NE without saying so: ‘Hot Snot’ 😂
😂😂😂😂👍
Great fix. That's it, blame a small child (an adult, who gives a £220 camera to a two-year-old, is clearly not responsible).
Cheers 👍😂😂😂😂
If something is called waterproof or watertight, then it cries out for heat glue. Use a heat fan to get rid of the glass...
Yes, that would probably be the correct way to disassemble it. I thought the lens and plastic part must have just been clipped after watching another video on disassembly. If I do another I'll definitely try to remove the glass first now I know how it's assembled 👍
Amazing what a cheap fix those cameras are expensive.
Good work 🥳🥳👍👍👍👍
Because, let you show us the videos and photos from the previous owner's 128GB SD card 😳😳😛😛😛🤪🤪 pleeeeease.
Thanks 👍The SD card appears to be damaged. It heats up when inserted into a reader and only shows a raw partition of 6GB or so and won't format.
@@BuyitFixit this is certainly a super² secret secret memory card with the lottery numbers for next week. You must find the Information 😭😭😭🤪
How the heck do you find things like this for 10$ on eBay? Some of the deals you are able to find are insane
It takes time and refined searching skills with eBay. Using Google search engine I found to produce better results then the eBay onsite search.
I was surprised it switched on when I received it. I expected it to be a lot worse. It was just luck that it had just been listed when I looked.
Respect to the low paid workers who make this stuff for a pittance
Are you talking about me producing the content 😂😂😂😂😂
The SD card is more than worth the cost of buying the GoPro :)
😂😂😂😂
Spectacular place to live. Jealous.
Thanks 👍 It's great in the summer, but it can be really bleak in the winter...
Clearly not designed by Sony during their heyday!
🤔 Your place seems to be bit too XPish for me 😄
555 likes as I finish watching this video. I have perfect timing.
My dad you to tell never force anything that doesn’t want to go.
I thought it was just clipped on, most things these days are just clipped together with plastic clips, and it honestly didn't take a lot for force. You live and learn I guess...
@@BuyitFixit Yes sir I love your channel and thank you.
If you need it I will send you the wire I used.
Gopro cameras are really expensive, so whoever jammed in the sd card is clearly a technical novice with more money than sense.
😂😂😂👍
not removable battery 👎
Too fast
GoPro junk , why bother ? 🙄🙄🤦♀🤦♀👎👎👎👎
Why not? It's broken and I like repairing stuff...everyone has their own opinion 🙂