I did the same thing for my kiger I am surprised to see that such a big company did this kind of cost cutting knowing the fact and not even updated even in the new 2022 models as well
I am a Kiger owner. This mud problem is the only negative aspect this car but it is a big irritating factor. Hope Renault will learn from this video and call back the cars for rectification. Thanks for the information. Good video. Regards Dr.Prince
@@VijayHansora Here is a detailed link of fender lining resolution at Renault workshop. As genuine part is available there ruclips.net/video/NOiahayEXf0/видео.html
It is still there but slightly the corner came off thanks to the washing guy who didn't see it and took off the corner only in passenger door. Rest is intact.
Thanks for the video it's a wonderfull hack. Just wanted to know if it's still working I mean wear tare on the piping. I am also planing to put this soon on my kiger. Plz sujjest.
It's been a year and it is still there. However the corner came off from one door as the cleaner yanked it off. But still holds good but remember that adhesive is needed or else it will fall off.
Sir, one more problem is there in kiger. As back tail headlamps water or dust is coming is there any solution for that. And even in Boot door also there's dust & water are coming. Please provide a solution. 🙏🙏
Hi Shanshank for newer models starting 2021 oct onwards all kigers have the foam as solution from company. If you bought it before that then get in touch with service center. Also the boot door dust is fine but of you want then you can use the bigger D pipe and install it.
You can use Fevicol heatx as a glue. I think that will be rock solid in a long run. Tapes won't stand against the pressure created while opening the doors.
I did the same thing for my kiger I am surprised to see that such a big company did this kind of cost cutting knowing the fact and not even updated even in the new 2022 models as well
बहुत ही शानदार काम किया है आपने। आपको हार्दिक बधाई शुभकामनाएं। बहुत बड़ी समस्या का हल किया आपने।
I am a Kiger owner. This mud problem is the only negative aspect this car but it is a big irritating factor.
Hope Renault will learn from this video and call back the cars for rectification.
Thanks for the information. Good video.
Regards
Dr.Prince
I have already highlighted the same to the Renault service center. Specially when these can be rectified easily.
Here is a detailed link of fender lining resolution at Renault workshop. As genuine part is available there ruclips.net/video/NOiahayEXf0/видео.html
@@VijayHansora Here is a detailed link of fender lining resolution at Renault workshop. As genuine part is available there ruclips.net/video/NOiahayEXf0/видео.html
Yeah really nice video..... That's the biggest problem with kiger.... Thank you
Glad it helped
This is really good.
I had notified this issue to Renault workshop but they didn't provide any solution.
Very well done and explained in detail, will be doing this on our Kiger soon, thank you.
Well made. Looks professional as well👍
Very well explained and well done bro u rock it. Also find a solution how to install fendern to stop the mud
Very useful video, thanks bro, iam also a kiger owner
Great work bro , where did you got the side scuff plates from ?
This is simple yet great...thanks for sharing, will try & let you know
Nice video...the promoter is the primer right??...how much quantity of both D and P piping required for all doors
Thanks brother ❤
You posted this video one year ago. Kindly make video on how much this rubber seal arrangement is effective. Show the condition of seal now.etc etc..
Ping me in FB i will share pics
For the knowledge more 95 percent is still stuck good and only one of the corner has come off cuz of washing and cleaning
Hi, how is it holding up now? almost after an year.
It is still there but slightly the corner came off thanks to the washing guy who didn't see it and took off the corner only in passenger door. Rest is intact.
I think it can also improve ac performance.
Thanks for the video it's a wonderfull hack. Just wanted to know if it's still working I mean wear tare on the piping. I am also planing to put this soon on my kiger. Plz sujjest.
It's been a year and it is still there. However the corner came off from one door as the cleaner yanked it off. But still holds good but remember that adhesive is needed or else it will fall off.
Allright, thanks a lot. I've ordered from your given link.@@VijayHansora
Engine noise cabin me reduce karne ke liye ye use kar sektha kya bhai, to add this in front gap of door
Size of D pipe there are two sizes on your amazon link
Hi brother,
Did this solve splas issue? Also, any benefits of noise insulation or damping?
Yes. It's still working. Although one place it came out due to mistake from washing center but still holding good. The key was the adhesive promoter.
@@VijayHansora notable reduction in wind noise or outside noise dampening?
Super tq bro
Hi
From where did you got the door gaurd ?
The door guard mentioning Renault are from the showroom itself.
Thankz very usefull video
Sir please let me know how many meters needed for both p piping and D piping?
Hi, nay I know you're feedback of 6 months?
👍🏻👍🏻👍🏻
Please tell where did u bought this
Please check the video and the description i have given all details.
Sir, one more problem is there in kiger. As back tail headlamps water or dust is coming is there any solution for that. And even in Boot door also there's dust & water are coming. Please provide a solution. 🙏🙏
Hi Shanshank for newer models starting 2021 oct onwards all kigers have the foam as solution from company. If you bought it before that then get in touch with service center. Also the boot door dust is fine but of you want then you can use the bigger D pipe and install it.
Mene 18/12)2021 ko purchase ki h ..per foam nahi aaya h... 1st service per hoga ye kaam aisa showroom se bola h
Is it still working ?
How much it cost
Good work done
Renold ni gadi na levay pk na letha
Hardware k pass hota hai ye liquid
Does this solution worked?
Yes it works as I regularly wash car with power washer these beading doesn't let any water thru the spaces.
Thank you sir
How is the experience after the beading? Does the mud or water go inside? Does the beading comes off after long use?
The mud and water issue is not there but honestly I doubt the tape will hold for more than 6 months. I will replace the double tape with 3M
@@VijayHansora in that case share the 3m tape link as well in the video description. I am planning to follow these steps.
You can use Fevicol heatx as a glue. I think that will be rock solid in a long run. Tapes won't stand against the pressure created while opening the doors.
Bro link for kiger logo sticker near door
It is stock but if you search in boodmo.com you will get that logo.
@@VijayHansora wont i get it in Amazon
Here is a detailed link of fender lining resolution at Renault workshop. As genuine part is available there ruclips.net/video/NOiahayEXf0/видео.html
Waise kitna kharcha aaya pipeing me
Video mein pura detail Diya hai overall 1100 ka aaya.
Worst cost cutting