RMR-86 PRO - How to get rid of MOLD stains!
HTML-код
- Опубликовано: 25 дек 2021
- Get rid of mold stains fast and easy with RMR-86 PRO Instant Mold & Mildew Stain Remover from rmrsolutions.com www.rmrsolutions.com/products...
To kill the mold completely you should follow up with this product www.rmrsolutions.com/products...
SAFETY FIRST!!! You'll need the following supplies...
Tyvek chemical hazmat PPE suit amzn.to/3H9Rsj2
3M full face respirator 6800 amzn.to/3Hj2oLv
3M P100 respirator cartridge filter 60923 amzn.to/3JlCzMo
Heavy Duty Nitrile Gloves amzn.to/312SwpE
Garden Sprayer amzn.to/3EoWSot
How to get rid of mold stains in your attic... just spray on and watch the mold disappear!
⭐ SUBSCRIBE for more free videos by clicking this link! ⭐
🔔 Click the bell next to the subscribe button for notifications when I release new videos! 🔔
ruclips.net/user/borsellinocar...
😀 I appreciate you taking the time to read the description! Please leave me a comment. I try to read all of them and respond to everyone!
Keep scrolling for more info and to see other ways you can give me feedback and help support this channel...👇
~~BUSINESS LINKS~~
WEBSITE www.borsellinocarpentry.com
BLOG borsellinocarpentry.com/blog
EMAIL LIST www.borsellinocarpentry.com/e...
FACEBOOK / borsellinocarpentry11
~~PERSONAL LINKS~~
WEBSITE www.nickborsellino.com
RUclips CHANNEL “Level Up Your Life” / nickborsellino
~~SUPPORT~~
☕ BUY ME A COFFEE! ☕ www.buymeacoffee.com/nickbors...
MERCH - Shirts & Mugs teespring.com/stores/borselli...
PATREON FAN CLUB / borsellinocarpentry
~~TOOLS~~
🔨 Want to see some my favorite tools? Check out my website for the full list!
○ BUSINESS WEBSITE TOOLS PAGE! www.BorsellinoCarpentry.com/t...
○ My favorite saw blades! amzn.to/2YnpNav
○ The best hammer! amzn.to/2QjR88Z
○ The ONLY tape measure and utility blade I use! amzn.to/2FIPqvM
○ Awesome polarized safety sunglasses 🕶 amzn.to/3fuXM78
○ Shop Table Saw amzn.to/35cAnVz
○ Jobsite Table Saw amzn.to/32o1Jq4
○ 48” Level amzn.to/3o03a6A
~~CAMERA GEAR~~
🎥 Interested in the gear I use to make videos? There's a full list on my personal website.
○ PERSONAL WEBSITE TECH PAGE! nickborsellino.com/tech/
○ Main camera amzn.to/3s0qN0n
○ GoPro amzn.to/3dtiwhR
○ Wireless mic system amzn.to/3jPIKvU
~~ADORAMA~~
I also buy a lot of gear from Adorama. They have great prices, fast shipping and great customer service. They sell all sorts of electronic equipment. Photography, Computers, Video, Audio, Home Electronics, Musical Instruments, Drones and MORE! adorama.rfvk.net/e96kO
~~TUBEBUDDY~~
Are you a RUclipsr too?! Grow your channel with TubeBuddy! It has helped me tremendously! www.tubebuddy.com/borsellinoc...
Disclosure: I get commissions for purchases made through links in this post.
Some of these links go to my websites and some are affiliate links to other sites where I'll earn a small commission if you make a purchase at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.
Borsellino Carpentry is a construction company located in Upstate New York. I specialize in small residential remodeling jobs. This channel is dedicated to teaching other contractors, carpenters, small business owners, DIYers, weekend warriors and anyone else who just wants to learn a little bit about home improvement. The full name of the company is actually Borsellino Carpentry & Home Repair, LLC but that is just too much of a mouthful! I also do tool reviews, business tips and other contractor related videos on this channel. In the wintertime I even do snow plowing videos. I try to mix it up and show all the parts of the contracting job, not just the glorious finished product. Please leave me a comment and let me know if there's any specific topics or jobs you'd like me to cover. Thanks for watching! 👋😃
#getridofmold #rmrsolutions #rmr86pro 
Хобби
You need to finish back up RMR-141 after the 86 as it kills and prevents future mold build up by putting a protective barrier and it penetrates the wood better.
yeah a bunch have people have told me this. I didn't know at the time. I haven't been up in my attic to see if it's grown back but if it has I'll just repeat the process with both chemicals next time
This is an awesome video. Any update if any of the mold came back?
@@jasebenson21 it did come back a little bit. As the comment above states there's another product that you're supposed to use after this one that I was unaware of. I don't understand why the 2 products aren't combined. Why would anyone want to get rid of the mold stains but not want to prevent it from coming back and have to repeat the whole process???
@@BorsellinoHomeServicesfrom what the manufacturer says, these chemicals can't be mixed. The bleach in RMR 86 would deactivate the germicidal enzymes in RMR 141.
great video and lots of good comments in the comment section. Dont take the video down..just maybe add to the title
rmr-86 works well but you should be applying antimicrobial afterwards and finding whatever the ventilation issue is or it will just grow back. Also when stapling of baffles do not shove them all the way down into bird block pull back approximately 3 in. Then staple also make sure you can see daylight coming in through bird block or insulation is too tight against Eve.
Thanks for the tip. When I installed the baffles they are just over the exterior wall into the soffit. My house has 20" overhangs so there's lots of space between them and the facia so I know they aren't blocked.
Did you take a swab after to make sure the mold was gone
good stuff that RMR-86.
BTW as my late great Master Handyman Glen Haege used to always say on the radio, "you can't add insulation without ventilation". In other words, if you're going to put in even more R-factor, you need to add more air intakes and vents to help keep the attic cool
yeah the house has soffit and ridge vents but i think that they under-engineer them both in the factory. I have considered adding gable vents but then you run into issues where they can negate the existing vents
It does NOT kill the mold. You have to follow with rmr141 to kill the mold.
Wow worked perfectly!
it's amazing!!!
I want to buy this kit, that includes the spray, face mask and the RMR-86 PRO. Need this urgently, they removed the attic insulation for 1500 dollars and demanded 1500 dollars for mold removal. I declined as it is very expensive to pay 1500 dollars, I want to do it myself which is definitely cheaper.
Professionals will say you can't do it DIY but that is because it hurts their business. One of my neighbors just paid 30K for mold remediation. That is just robbery.
ouch! yeah that's crazy expensive!
Yea that makes sense. They’ve even infiltrated the internet ha every where I look or ask on google says hire a professional. I’ve always questioned that thinking. Why wouldn’t you be able to do it yourself?
awesome product....i didnt notice any roof vents, do you think this may have been part of the cause?
There's soffit and ridge vents. If you have those, you're not supposed to have any other vents. But obviously the ventilation isn't enough. I've thought about putting in a gable vent with a fan. My dad has one that is hooked to a thermostat in his house. Gets the heat and humidity out of the attic in the summer, which I am thinking is a big part of the problem
Thanks for this
This item incredible
I agree. Mind blowing to watch it in real time while I was doing it!
@@BorsellinoHomeServices did the mold return?
Has any mold returned?
Do u need to check bathroom exhaust line may is leaking and all moisture keep on the attic.
Thanks for the idea. It's definitely connected. I think the ridge and soffit vent just isn't sufficient. Also I didn't have enough insulation in the attic so it got warm and then caused frost on the plywood. And in the summer it is so humid here and hot in the attic that it just exacerbated it. I added more insulation and that helped this winter. I want to add an attic fan next
Did you need to run a hepa air scrubber at the same time to avoid spreading spores?
I didn't use one but probably wouldn't hurt. I wasn't really disturbing the mold by just spraying it. If I was scrubbing I would definitely want some sort of air purification
When you spread that product to the roof sheathing, did the liquid drip into the insulation?
If you put too much on, yes. It's very fluid like water. But most of it soaked in. Lots of overspray too. I was okay with it getting on the insulation in case there was any mold on it, and then when everything was dry I added another layer of R30 insulation on top
Great video, is there a difference between the RMR-86 and the RMR-86 Pro ? The Pro one only comes in a gallon size. I think we don't need that much; the smaller size will do for us.
i don't know. I'm sure the website probably explains and they might have a customer service number you can call
@@BorsellinoHomeServices OK, thanks!
What about RMR 141? Should that be used to kill the mold and the RMR 86 pro is just for cleaning the stains? Does RMR 86 kill the mold?
Hey beautiful
Is RMR-86 corrosive to steel? Will it corrode the steel connectors and joist hangers?
apparently yes! this is a quote direct from RMR Solution's website
"What type of surfaces is RMR-86 not safe to use on?
RMR‐86 can be corrosive if applied to the following materials: ductwork, copper, metal, mechanicals, nail plates, steel, aluminum, or any materials prone to corrosion. If RMR‐86 is accidentally applied to these materials, quickly wash area with soap and water or wipe down with WD‐40."
I feel like hydrogen peroxide would do the same thing. No?
I've started with mould patches on different walls. In my attic which keeps coming back after removing with bleach and water. Should I tackle this myself?
I didn't know this when I did it, but this product removes the stains and they have a followup product to keep the mold from coming back. So it's a 2 step process. Check with RMR for more info
Are you sure the staining isn't from a leaking roof? I'm sure the vent was contributing to the staining but I think you have roof leak. Nice video!
the only leak was an ice dam one winter but that was taken care of. even still it shouldn't have caused mold in the entire attic
That space is in dire need of more ventilation. Wood rot will follow the mold.
I agree. The only problem is that it already has standard soffit and ridge vent. If I add gable vents they negate the other vents so it won't have proper airflow. I've considered doing it anyways just to try. This year I was back up there adding more insulation and the mold hasn't come back so that's a good thing at least
This is a STAIN remover not a mold killer
MFG info:
" Last but not least, don’t forget to apply RMR-141 RTU to kill the mold after RMR-86 PRO"
Yup. I learned that after making the video. If you notice the title is:
RMR-86 PRO - How to get rid of MOLD stains!
And the description says:
Get rid of mold stains fast and easy with RMR-86 PRO Instant Mold & Mildew Stain Remover from rmrsolutions.com www.rmrsolutions.com/products...
To kill the mold completely you should follow up with this product www.rmrsolutions.com/products...
@jason christopher yeah I didn't have any leftover. It worked well
Well done Nick! That is an amazing product! It would seem moisture is being trapped in the attic space. I think I saw a ridge vent. Is that enough? Also, are there vents in the soffits? I was surprised when you said the product you sprayed was still wet a few days after application. What do you think?
yes there is ridge and soffit vents but I'm planning to add some gable vents which I would never recommend but the ridge vent doesn't seem to be doing it's job. Yeah I think it was wet because it has been so cold and I put A LOT of the stuff on LOL
The problem is the ridge vent install. Sooo many "Roofers" will Squash the Fiber Product risge vent and then it is virtually useless. You need to use 2.5-3" nails through your Ridge Cap to no Squash the Fiber Vent. Or, if they used the Harder Plastic ridge vent the it could be clogged with Leaves, Dirt, Bug Nests, etc. Also, continuing the attic vents ALL THE WAY to your ridge vent in each cavity can help with adequate air flow. Are you ridge vents installed without obstruction at the soffit end. I see Insulators that "Blow" the attics blow the fiberglass right down the vents (Baffles) and not care about it, clogging the vent (Baffle) itself. Alot of contractors have the "It's not my house" attitude, not all contractors. But one bad apple... anyway, hope it all works put for you.
How long did it take for the smell from the product to go away?
i don't really know i didn't go up into the attic to check. inside the house it barely smelled because i had it sealed off well and opened some windows and it was barely noticeable
Can I use this before removing drywall with mold?
it certainly won't hurt! make sure you wear PPE
Thnx for the video, what is the exact mask that you got? P95 or P100 from home depot? Thank you...
everything is linked in the video description bute here it is again...
Tyvek chemical hazmat PPE suit amzn.to/3H9Rsj2
3M full face respirator 6800 amzn.to/3Hj2oLv
3M P100 respirator cartridge filter 60923 amzn.to/3JlCzMo
Heavy Duty Nitrile Gloves amzn.to/312SwpE
Garden Sprayer amzn.to/3EoWSot
@@BorsellinoHomeServices oh 🤦🏻♂️ sorry about that & thx.
Any tips on how to move around in the attic when there's no flooring down over the blown in insulation? Thanks and very informative video.
How can I get this I have the same problem too my name is Paul send me the information thanks
rmrsolutions.com
Did this stuff stink up your entire house or did the fumes stay contained to the attic?
I made sure to seal off the attic well but it still permeated so I did it on a warm day and had to open up the upstairs windows. It wasn't too bad after a few hours but the attic was unbearable when I took my mask off
How are the roof nails holding up with this stuff?
They seem fine. The mold came back a little, not too bad though. I didn't realize when I made this video that it's just a stain remover and not a mold killer, which I find hard to believe because of how toxic it is. But apparently they have another product RMR-141 i believe that you're supposed to use AFTER you use this product
This product only removes the stains, it does not kill the mold
oh really?!!!
@@BorsellinoHomeServices
Yea it’s more for after treatment
I’ve seen others mention it in product reviews etc. so I’m not sure
The label even says mold stain remover not mold killer so I would call the company to be certain
I’m about to use the product in my attic myself but was told the mold was treated already
@@ianshay2664thank you for the heads up I will have to contact the company
@@ianshay2664 from videos I've seen first you use RMR 86 , then you go over it with RMR 141 RTU , that kills it.
@@BorsellinoHomeServices you should use rmr 141 first then follow with 86
Will it work on the canvas tent trailer walls?
I bet it would, yes. I made a 42 second video about cleaning pop-up canvas walls if you want more tips on how to protect it after you get the mold out... ruclips.net/video/zO72mhgZOec/видео.html
i'm not sure how the canvas would hold up against the chemicals. you should try contacting the manufacturer
Do you have to wipe it afterwards or just spray and leave it
I was actually told this isn't the correct product to use and doesn't kill the mold. Not sure if that's true or not but that's what I was told. I'll be taking this video down
@@BorsellinoHomeServices Right. I believe the rmr86 removes the mold stain and then rmr141 kills the mold roots.
I am curious, the active ingredient in product is sodium hypochlorite which is bleach, can we just use bleach? Less expensive, no? Javex has 10% sodium hypochlorite where as rmr has
good question, but i don't know the answer!
Bleach or rmr86 only removes the stains, need to also apply a disinfectant like rmr141 (ammonium chloride)
If it is bleach, the answer is Y E S of course; that product is a bit of a scam;
BUT, bleach does not kill the root of mold in porous surfaces,like wood or stucco,it
just clears the COLOR of the visible part at the surface;
DO NOT blow on the mold with any kind of sprayer that agitates the air, ,it needs to be very softly done, very slowly!!
---- the mold SPORES are so light and loose, they can even travel in SMOKE from a fire, for thousands of miles, it has been found way out in another country( internet has that...);
mold will release its spores into the air if you just wave your HAND near it!!! Mold loves that,that is the way it SPREADS, it's its technique, otherwise it will just saty there in the HUMIDITY stain;
another GOOD way is to WIPE it off with RAGS and HOT WATER, doing it extremely S L O W ... i wear proper masks and a motorcycle helmet and disposable gown when i do it;
A way better than bleach, is to use regular 3% Hydrogen Peroxide; that KILLS MOLD, read up on it,B E F O R E you do anything; they sell spray bottles with it ,in a half-gell form , very convenient for overhead areas,it clings on, fizzes and kills mold;
but if the roof leak was not FIXED, it will come back if it is a porous surface, you'd need a BIOCIDE then (pro stuff..); need ventilation too.
Will this product bleach carpets? Like my vehicle carpets are black will it bleach them or create stains?
i have no idea. I would guess that it would though this stuff is very toxic and smells like really intense bleach
Absolutely. I use this stuff at work and both the 86 and 141 will bleach clothes
Just curious…did any of the mold come back?? I have to do this to my attic too. I’m gonna use the RMR 86 and then use the RMR 141.
yeah it has come back a little. I didn't know when i did this that there was another product that helps keep it away and this product was just for the stains. i would recommend using both products
Providedjoke how did the rmr 86 and rmr141 work for you?
@@jasebenson21 OMG…they both worked AMAZING!! So far nothing has come back! The toughest part of the whole thing was sweating in that protective wear! I definitely recommend this stuff for anyone that wants to get rid of mold. Once again…thanks for posting this video! It was a big help!! 👍🤡👍
@@providedjoker2649 thats awesome! Thanks for sharing!
Where did you get the product from?
direct from their website
No negative air during cleaning??
didn't really have a way of doing that without cutting a hole in the side of my house
@BorsellinoHomeServices negative air is achieved by setting up a containment with an air scrubber in the room where the attic hatch is
Dang $32 on Amazon per gallon.
You realize how many mycotoxins that mold is giving off right ? That solution won’t kill the mycotoxins all the wood needs to be replaced by a professional remediation company .
How is it holding up a year later?
last time I was up there a few months ago adding more insulation it was great. I've been told though that this product just gets rid of the stains and there's another product that further kills the mold. Although this really seemed to do the trick
@@BorsellinoHomeServices sweet thanks bro God bless
@@BorsellinoHomeServices the RMR 141 disinfect it or use Decon30
Thanks for doing this video… I just discovered the same kind of mold in my attic too n I was freaking out. Watching your video … calmed me down….knowing I can do it myself and that this stuff really works! Has any of that mold came back?
Whats sad is if you google mold killer this product comes up highly reccomended. Yet now you say its a stain remover. I bought a gal. to kill mold on basement block walls.
You should also buy the RMR-141 to apply afterword's to kill the mold. It's mentioned in the instructions.
Yeah I was misled too. I was telling everyone it was a mold killer and the keyboard warriors came to my rescue and enlightened me that I was wrong and this is only a stain remover. I think it's in the directions but I missed it and I think RMRs ad's are misleading
Ariel genevieve stanley evergreen terrace deland in tent and all ppl in whole street come in contact with anything happened anywhere on 11
wtf does this mean
I want to chime in as a professional. Do not use this as your process. You need to remove mold first..... RMR is only a stain remover. Removal takes physical abrasion with wire brushes, sanders, meadia blaster and or hepa vacuums. This just bleaches the surface. If you took a lift tape sample of this area as well as an air quality test it would prove that mold is still in the area. Words of wisdom, seek professional help and someone with an AMRT Certification.
Good to know. The product is misleading. Someone else mentioned this too. I'll probably take this video down
@@BorsellinoHomeServices NO! Don't take the video down. Just change the title and description. It's still useful, just not a full blown remediation.
I asked a professional and he said that rmr-86(normal version not pro) is a good home solution for mold like this. It's more for staining but it does kill mold as well, as the active ingredient in it, which is the same as bleach, does kill mold. Not as effective as other chemicals but it does. Use proper protection and ventilation as it is a toxic chemical of course.
Nothing beats having a professional come in and properly treat it and remove it, but at least based on what I have (which isn't as bad as this attic) rm-86, is an adequate home solution. At least according to the professional I asked about home solutions so idk I think it can still be considered
This is a STAIN remover not a mold killer
MFG info:
" Last but not least, don’t forget to apply RMR-141 RTU to kill the mold after RMR-86 PRO"
@RH-nc8uu do you know what bleach is? Bleach literally destroys biological matter l
paint it
mold will just eat through paint like a monster 👹
Why the heck is not spaying?!! 😖😖😖
?
Your beard made it so the face mask couldn’t make a proper seal against your face.
true but there's not really a better option is there? a space helmet?
@@BorsellinoHomeServices Actually with a beard you could use a PAPR