Nice speakers. Thank you JP for offering 3 way component speakers! We all know for best sound quality 3 way speaker sets are the way to go! good looking crossovers! They are the heart of good component speakers and often get the least amount of attention.
Nice looking speaker's.Nice beefy mids. The only issue I see is the terminals coming out of the Tweeter's. It will definitely limit install locations because of the death needed for the connectors and where they're located.
Excellent JP! I just received my JFX-653’s and I will be running my set Fully Active, JP84 on the Tweet s & Mids and (2) channels from the JP 234 on the 6.5 subs processed by Audio Control DM810. Think I’ll order the 652 set and run them Passive on the other (2) channels of the JP234. Should sound sweet.
Definitely going to try and get my hands on the 3 way setup and run it fully active with my jl audio XD600/6. Finally something for us SQ guys 💪🏽 just hope the 6.5 fit in my charger 😂
looks like a soft dome tweeter that's good for the 2 way almost wish the 3 way had a soft dome but it appears the surround is silk so im thinking that's where the hybrid comes in
Just installed the JFX652 on my single cab truck replacing a pair of hertz cpx652. Oh man are these things clear. Hertz is known for their highs man but these things are just fantastic. Crystalizes violin just sounds so much better now. Keep the products rolling JP imma keep buying. All ran off JP34ab
🙏 please dabble more into the sq market. If running the 3 way activate a jp amp AB would be awesome. I'd be one of the first to buy a set up like that. My "Ta-Hoe sq" would rock them.
when you gonna upgrade the 40w Bluetooth speaker to something like 100w 200w +++ i work at a job ( large factory ) where we cant have headphones but everyone can bring in they own speaker ( its like a whos louder comp in there no sound volume limit ) ..... well 40w lil speaker VS a actual PA mono speaker(s) i have no sound i cant hear shit. i am digging your product but i swear im about to fold and go for JL party box and pray its not trash for the cash ** please make bigger, louder and more watts D4S Bluetooth speakers idc if i have to plug it into the wall ill buy it! **
Be careful JP! Toro Tech is trying to mimic your DS4 speakers by using the same cone materials. They already have been doing sales infringement on their 7" Touchscreen. They have copied the Boss BE7ACP Multimedia. They have the same exact owners manual and functions. The only difference is the buttons used to navigate through the stereo. Just looking out! Have a great and productive day!
How come when I call your company to ask about my product I bought from you your operators never answered the phone ever, I called several times...That's bad business bro poor service...If you ever do get someone they are nice though...But Dammm answer the phone
First he sensitivity is too low, thats why it reuires so much power, unless your competing in sq, you can use a couple of skar audio rp 150x4 with cdtaudio speakers and a cdt audio sub for sq, for less than 600, real sq tweeters are good with 50 to 100 as long as you use a dsp, mids the same and midbass 100 to 150 is enough, thats why i recommend the rp 150x4, and remember the gain nob is not a volume knob its only to match the voltage from headunit to dsp and amplifier, main reason why so many amplifiers dont last,
Definitely picking up a 2 wat set at end of the month if available.....any suggestions on matching a 12in subwoofer to my jp23v1.5....I currently run a single 12 In a 2cubic ft. Kerf ported box ....but mat go with 2 12s ....or leave the single and buy another dual 2 that can handle more power currently run an American bass xr 12 dual 2 ....but amp has plenty more power only at about half way on gain ....and I have good electrical.... would say up to 5000 watts possible on current set up ....anyone have any suggestions...
These looks super nice man. They look of great quailty I'm sure they sound as good as they look too. Would love to see a 4" version on there own so I can swap out my bookshelf speakers for these. I'll say it again as I do once every few years of watching for over 10 years now prolly almost 15 years but I remember when you started and had the 4 RD Heavyweight 18's on I think 2 D9's at the time in the same Tahoe you still have now on your old original channel not many people know about that. JP you came a long way and dealt with all the bull crap along the way and look at you now your a staple in the car audio scene and I truly appreciate it.
I want some so bad SO bad I just do not have it I just bought the cerwin Vega waterproof sound bar for my father in-law golf cart his b day is close to father's day so I got it for both btw jp happy Father's day to you as well
Nice speakers. Thank you JP for offering 3 way component speakers! We all know for best sound quality 3 way speaker sets are the way to go! good looking crossovers! They are the heart of good component speakers and often get the least amount of attention.
JP can you talk more about how OZ audio was a part of the design or had input on the building of these. BigD mentioned it but no details.
That adapter plate is well needed
Nice looking speaker's.Nice beefy mids. The only issue I see is the terminals coming out of the Tweeter's. It will definitely limit install locations because of the death needed for the connectors and where they're located.
Excellent JP! I just received my JFX-653’s and I will be running my set Fully Active, JP84 on the Tweet s & Mids and (2) channels from the JP 234 on the 6.5 subs processed by Audio Control DM810. Think I’ll order the 652 set and run them Passive on the other (2) channels of the JP234. Should sound sweet.
That's going to be sweet man! DSP is a huge step up once its fully tuned. So is class A/B
Did the 3way set have the Tweeter adapter like the 2way ? Thanx in advance for answering
Definitely going to try and get my hands on the 3 way setup and run it fully active with my jl audio XD600/6. Finally something for us SQ guys 💪🏽 just hope the 6.5 fit in my charger 😂
You can use a 500watt amp on 100watts speakers.. if you know how to set it up.
I can't wait to hear how good they sound 🔊🎵🎶 they look amazing
looks like a soft dome tweeter that's good for the 2 way almost wish the 3 way had a soft dome but it appears the surround is silk so im thinking that's where the hybrid comes in
Just installed the JFX652 on my single cab truck replacing a pair of hertz cpx652. Oh man are these things clear. Hertz is known for their highs man but these things are just fantastic. Crystalizes violin just sounds so much better now. Keep the products rolling JP imma keep buying. All ran off JP34ab
These are so bad ass!!!! Best set up for the money BY FAR!!!!!
These are going right in the wheelchair van 🙌
Be nice for my situation if that 3.5 mid speaker came with a grill.
🙏 please dabble more into the sq market. If running the 3 way activate a jp amp AB would be awesome. I'd be one of the first to buy a set up like that. My "Ta-Hoe sq" would rock them.
any plans for a 4in component set ?
Man that's a high cross over point for a tweeter in a two way system.
These speakers look sweet
Cheaper priced than CT sounds 3ways?
I would love a set of those 3-ways. I would have to make custom door panels in my truck but I would gladly do that for those beautiful speakers.
when you gonna upgrade the 40w Bluetooth speaker to something like 100w 200w +++ i work at a job ( large factory ) where we cant have headphones but everyone can bring in they own speaker ( its like a whos louder comp in there no sound volume limit ) ..... well 40w lil speaker VS a actual PA mono speaker(s) i have no sound i cant hear shit. i am digging your product but i swear im about to fold and go for JL party box and pray its not trash for the cash ** please make bigger, louder and more watts D4S Bluetooth speakers idc if i have to plug it into the wall ill buy it! **
Be careful JP! Toro Tech is trying to mimic your DS4 speakers by using the same cone materials. They already have been doing sales infringement on their 7" Touchscreen. They have copied the Boss BE7ACP Multimedia. They have the same exact owners manual and functions. The only difference is the buttons used to navigate through the stereo. Just looking out! Have a great and productive day!
If the woofers are the same why do they have a different frequency response?
249-300
or a 3.5 component set ?
Does the 3 way set come with the Tweeter adapter like the 2way?
Are these speakers good for rap music with bass for the doors?
I need that D4S shirt
Who is your nearest dealer in Asheville
Hello sir. I got a question, what would be the best jp amp to push my memphis viv 14?
How come when I call your company to ask about my product I bought from you your operators never answered the phone ever, I called several times...That's bad business bro poor service...If you ever do get someone they are nice though...But Dammm answer the phone
I really want a set of the 652's but I don't think I can fit a 2" tweeter in the stock location on my Jeep Wrangler.
Those look good!
First he sensitivity is too low, thats why it reuires so much power, unless your competing in sq, you can use a couple of skar audio rp 150x4 with cdtaudio speakers and a cdt audio sub for sq, for less than 600, real sq tweeters are good with 50 to 100 as long as you use a dsp, mids the same and midbass 100 to 150 is enough, thats why i recommend the rp 150x4, and remember the gain nob is not a volume knob its only to match the voltage from headunit to dsp and amplifier, main reason why so many amplifiers dont last,
Definitely picking up a 2 wat set at end of the month if available.....any suggestions on matching a 12in subwoofer to my jp23v1.5....I currently run a single 12 In a 2cubic ft. Kerf ported box ....but mat go with 2 12s ....or leave the single and buy another dual 2 that can handle more power currently run an American bass xr 12 dual 2 ....but amp has plenty more power only at about half way on gain ....and I have good electrical.... would say up to 5000 watts possible on current set up ....anyone have any suggestions...
These looks super nice man. They look of great quailty I'm sure they sound as good as they look too. Would love to see a 4" version on there own so I can swap out my bookshelf speakers for these. I'll say it again as I do once every few years of watching for over 10 years now prolly almost 15 years but I remember when you started and had the 4 RD Heavyweight 18's on I think 2 D9's at the time in the same Tahoe you still have now on your old original channel not many people know about that. JP you came a long way and dealt with all the bull crap along the way and look at you now your a staple in the car audio scene and I truly appreciate it.
Bagus sekali ini spiker
I'm getting the JFX-653s
All I no I wanna get them before they hike up the price😅
So.... When should we expect JP Subwoofers? Please use a USA based build house. I know it will be more expensive. However, it will be worth it.
That's a good idea, but keep dreaming... it's D4S. It will all be china when it comes to speakers.
No, it won't be worth it. The majority of people are not going to spend twice as much just to say their shit is made in the USA.
@bdd1469 dc audio, fi audio etc do it without a problem
Anyone own these? How are they for quality?
I want some so bad SO bad I just do not have it I just bought the cerwin Vega waterproof sound bar for my father in-law golf cart his b day is close to father's day so I got it for both btw jp happy Father's day to you as well
Jp frieeeddd 😂😂
Drag and Destroy show Caddo Mills Texas Sep. 22
Texas Heatwave in Austin Texas
I seen it. In Ga.
Go to some smaller shows
The magnet ares looks like my alpine status speakers