BMW G20 / G21 Steering wheel replacement. Placing the M Performance steering wheel on.

Поделиться
HTML-код
  • Опубликовано: 7 янв 2025

Комментарии • 52

  • @presnaz
    @presnaz День назад +1

    Jo! Wat een werk, maar super gedaan! Bedankt voor het delen! 😅 Prachtig nieuw stuur ! 😊

    • @JanSV
      @JanSV  День назад +1

      Graag gedaan. Renzo geniet er dagelijks van, van zijn knappe stuurwiel. Groeten Jan. België

    • @presnaz
      @presnaz День назад +1

      @ Dat snap ik. Ja echt geweldig! Groeten Jack uit Nederland.

  • @stretch8613
    @stretch8613 11 месяцев назад +1

    Hi is it necessary to disconnect the battery in a petrol car?

    • @JanSV
      @JanSV  11 месяцев назад +1

      Yes it is. Renzo had followed the instructions from bmw.

  • @emre_murat
    @emre_murat Год назад +1

    Was there two screws keeping the trim on the steering wheel at each sides or another third one at the bottom of the steering wheel ?

    • @JanSV
      @JanSV  Год назад +1

      Hello, I can't say that from memory anymore. I filmed the work, Renzo was the mechanic in this video. regards

  • @kempert9788
    @kempert9788 Год назад +1

    Amazing video! Keep the good work up!

  • @liken1288
    @liken1288 Год назад +1

    What’s the size or type of screw driver when you removed the buttons on the steering wheel trim? At 18-19minutes if the video

    • @JanSV
      @JanSV  Год назад

      Hello li. I am sorry. Did not pay attention on the size of the bolt. But it is a torx screw I think. Greetings from a sunny belgium.

    • @B58Hunchoo
      @B58Hunchoo Год назад

      @@JanSVwhat was the size

  • @gsonz172
    @gsonz172 3 месяца назад

    7:34 Is there anything you can damage when removing the airbag with the screwdriver? I am scared of pushing too hard

    • @JanSV
      @JanSV  3 месяца назад

      You can only push away the piece of metal that holds the airbag in place.

  • @filipev83
    @filipev83 Год назад +1

    Hello, my g21 it’s a 318d without paddles! Is it possible to upgrade?

    • @JanSV
      @JanSV  Год назад

      Hello, you can find it on
      www.newtis.info/tisv2/a/en/
      or
      bmwtechinfo.bmwgroup.com/#/login

  • @Dmarshmellow
    @Dmarshmellow Год назад +1

    I replaced this wheel on my G87 M2 and the only issue I encountered after was the horn stopped working. Do you have any suggestions on what that may be caused by? I installed new wheel exactly as you did.

    • @JanSV
      @JanSV  Год назад

      Hello, the only thing i can think of, is a fuse that is broken, or a bad connection.

    • @timriedel7089
      @timriedel7089 10 месяцев назад

      @@JanSV hello. I have the same issue. Did the exact same things of course. Don't know what I should do.

    • @JanSV
      @JanSV  10 месяцев назад

      @@timriedel7089 Hello tim, the replacement of the steering wheel with renzo his car went flawless. So i have no idea wat it could be, sorry.

  • @baronvonherzenberger4417
    @baronvonherzenberger4417 Год назад

    Hi Jan. Where can i find the manual at 11:43?

    • @JanSV
      @JanSV  Год назад

      Hello,
      This one if you have an account
      www.newtis.info/tisv2/a/en/
      Buth no new users are allowed.
      You can you this one then.
      bmwtechinfo.bmwgroup.com/#/login

  • @user-kj8zz6et8r
    @user-kj8zz6et8r 5 месяцев назад

    Hello bro, my car is 2018 g30 luxury model which doesn't have paddle shifter, so I changed it to M steering wheel which it has paddle. Question is only thing I need to do is adding code to activate paddle shifter or should I install another line for it?

    • @JanSV
      @JanSV  5 месяцев назад

      Hello. I am sorry. I do not know.

  • @rfb4150
    @rfb4150 11 месяцев назад +1

    Great explanation. It is correct all the previous settings are remain after disconnect all the batteries?

    • @JanSV
      @JanSV  11 месяцев назад +1

      Yes indeed. All settings remains the same.

  • @bigpinkeraser
    @bigpinkeraser Год назад +1

    Appreciate this install video!
    Just to confirm, this wheel comes with the carbon fiber trim piece correct? And you just need to swap the button assemblies over from the silver plastic trim?

    • @JanSV
      @JanSV  Год назад +2

      The carbon fiber trim piece you have to buy seperately. Indeed, the button assemblies you have to build over from the original steering wheel to the new one. Succes.

    • @bigpinkeraser
      @bigpinkeraser Год назад +1

      @@JanSV I thought that to be the case, glad I double checked before ordering the wheel!
      Thank you very much.

  • @murathanakn8027
    @murathanakn8027 Год назад

    can we put this streeling wheel to a sportline car which one is also g20?

    • @JanSV
      @JanSV  Год назад

      Hello. I can not say for sure. Sorry

  • @Thorgal85
    @Thorgal85 3 месяца назад

    Ah man serieus... in mijn 330i is er opeens iets beginnen te rammelen in mijn stuur achter de knoppekes van de radio bediening. Iets te veel werk om die airbag eruit te halen en geen goesting om gaatjes te maken in mijn stuur ook ni 😮‍💨

    • @JanSV
      @JanSV  3 месяца назад +1

      Die gaatjes zie je eigenlijk niet hé. Ma tis idd wel een groot werk. Dan zal het accepteren zijn dat er iets rammelt.

  • @tngooo
    @tngooo Год назад

    How is the durability on the Alcantara fabric?

    • @JanSV
      @JanSV  Год назад +1

      I am very satisfied with the quality

  • @MegaGecas
    @MegaGecas Год назад

    Hello, thanks for your effort making this video. Are old and new wheels the same in size (diameter and thickness)?

    • @JanSV
      @JanSV  Год назад

      The steering wheel is indeed almost identical to the old steering wheel. Both in thickness and in diameter.

  • @mahmoud-ty7km
    @mahmoud-ty7km Год назад

    Perfect ❤

  • @johnlevington4609
    @johnlevington4609 5 месяцев назад

    Got same car like u and I’m Belgium can u do same for me

    • @JanSV
      @JanSV  5 месяцев назад

      I can ask it to renzo of you want.

    • @JanSV
      @JanSV  4 месяца назад

      Hello. Renzo is not doing it for someone else.

  • @sP33DyEdOld
    @sP33DyEdOld 8 месяцев назад

    Ik krijg mijn hybrid stekker niet meer ineen heb alles geprobeerd.... Ben radeloos

    • @JanSV
      @JanSV  8 месяцев назад

      Hallo, daar kan ik weinig op zeggen, bij ons verliep het zonder problemen.

    • @sP33DyEdOld
      @sP33DyEdOld 8 месяцев назад

      @@JanSV het is uiteindelijk gelukt door aan de zijkant die rode klem in te drukken en dan gleed die er wel in.

    • @JanSV
      @JanSV  8 месяцев назад

      @@sP33DyEdOld Top, knap gedaan, ik zag renzo in het filmke ook even met een platte schroevendraaier iets induwen voor hij het er terug kreeg in geschoven.

    • @sP33DyEdOld
      @sP33DyEdOld 8 месяцев назад

      @@JanSV ik zag het niet zo goed maar het was net of hij dat groene pennetje omhoog hield.

  • @bmwsincekid
    @bmwsincekid 9 месяцев назад

    Its easier to remove first the wheel and then switch all the parts while the wheel is out ,, this way takes 2-3 times longer…

    • @JanSV
      @JanSV  8 месяцев назад

      That is also a possibility. But i think it takes te same amount of time.

    • @bmwsincekid
      @bmwsincekid 8 месяцев назад

      @@JanSV i did it both ways , removing completely then take it to a table , then you have acess to all screws back side and everywhere in car its difficult

    • @JanSV
      @JanSV  8 месяцев назад

      @@bmwsincekid For the back side you can win some time indeed. For the front side i think it takes the same amount of time. Greetings

    • @bmwsincekid
      @bmwsincekid 8 месяцев назад +1

      @@JanSV Yeah thats true , thanks for the video it helped alot!!! 👋🙏

    • @JanSV
      @JanSV  8 месяцев назад +1

      @@bmwsincekid You are welcome. Greetings Jan