Love my Dark Impact, got sick of replacing ball diff until I found out other people were using super glue to lock it up. Now running 4000kv 500w brushless with no problems😀
Ha ha, yeah. With this one I just reassembled and tightened the rear diff after I found out it was melted :-) Works fine for runs that do not involve Racing and important cornering.
Cool! Love the DF-03 as well, except for the rear diff that keeps breaking down for everyone. Got a DF-03MS now and this one has been converted back to stock. Videos will follow :-)
What an amazing car you made of it! Congratulations! Unfortunately i lost all of my tamiya rc's on a fire...And right now i'm not able to afford a new one. Maybe with time i'll be back into the hobby.
You did a great clean up job mate. Good old soapy water. This really is a seriously good looking buggy. The wheels look good on it too. I remember we discussed these. I still haven't used mine yet. It's a shame they won't fit the DT-03. I Looked up the shocks on Modelsports website. £95 -110 euros, plus post ! I don't pay that for cars ha ha ha. They are good though, and no doubt worth every penny. You did well getting these. I'm really excited to see your new one. : )
WD-40, soap and water is essential when buying second hand models :-) Luckily my new DF-03MS has never been running so only need to get the shelf-dust off her :-) Yeah. I have two DT-02/03 sets and two DF-02/03 sets now. Love them. But I never buy them separately - only together with second hand models. That way the costs are much much less :-)
Great project, Nordic RC Visions! Like the way you cleaned up the buggy, and we can all appreciate the low-budget approach to the start of the project. Those shocks are sweet - Rob has the same set fitted to his DF-02 and they work just great. The DF-03 is very new to me too, but looks like it will be fantastic off road, with the suspension and ground clearance - impressive (and very brave) jumping on tarmac, but I winced every time I watched at 7:22 as the car goes out of shot... Really enjoyed this one mate, and a big thumbs up - looking forward to the next one :-)
Thanks, Mark! Yeah, sometimes it’s good to keep it low budget until one knows it’s gonna stay. Liked it so much I got another DF-03 coming up :-) Almost new so I will probably not go any further with this one. I just love these shocks. Got them on my DT-02 (in shorter versions) too and gonna equip my DF-02 and DT-03 with them too. I’m addicted to them :-) And yes, it landed upside down on the front shock tower out of camera. Each time I go here with a buggy that goes more than 30 kmph it goes wrong. Luckily it survived with only a very scratched up front tower but I stopped jumping it at that moment :-)
Ahh - glad to hear the buggy survived intact :-) Yeah the shocks are great but a little expensive - in a similar way I'm addicted to the Turnigy Trackstar shocks (you have probable noticed!!!) - they are very close in specification and performance to the Tamiyas, but a fraction of the cost. Must get me one of those DF-03s one day :-)
Lovely video ! I love this car, and i agree those shocks are great. Try Traxxas anaconda tyres for road use, although they cost a bit. The ball diffs have to be assembled correctly and i use ceramic balls as they will withstand heat more than the steel ones. I'm also installed a slipper clutch, it helps. The battery and engine compartment are very tight. I have difficult finding a proper brushless motor for it.
Thanks! You got one? Can’t seem to remember. But yeah, I’m liking this one very much, so I have actually already switched model to a DF-03MS that I purchased from a friend. Only build, never run. Looking forward seeing how it goes with the diffs on that one :-)
Yes i got 2. One of them is a MS. Although i don't drive that one. But my runner is full of hop ups so it's very close to the MS except for the shocks.
I've been looking forward to this, nice work and great video. It looks like a very capable setup and nice to drive. I've always been a bit wary of aluminium replacements, I had the shock towers on my DT03 which looked really bad after one tumble. I'll be interested to see how you get on with these parts.
Grumpy Granddad Stinky’s RC Dump Thanks, Grumpy. Yeah, quite nice set up. Need to sort out the ball diffs. And yeah, I like aluminium c-hubs and such, but shock towers can in some cases, like this with these massive blue ones, destroy the looks and ad a lot of weight. I actually scratched up the front shock tower too on this run. But no worries, as it needs to go whenever I get a new body for it.
I've started a thread on TC, The DT03 TRF Wannabe. I'm in two minds whether to fit a ball diff, they're pretty cheap from Hong Kong. Some say they're great, some say they're a pain in the butt. I might wait to see your video before I make up my mind. I should imagine it would be ok if it was set-up correctly, otherwise racers wouldn't use them.
Nice video once again, this brings me back with my DF03 when I tried to run a castle cm36 5700kv motor on 3s lipo lol. The rear diff started slipping time & time again, so I fitted the DF03 Slipper Clutch set P/N: 53925. Hop-up Options 3mm Tungsten-Carbide Diff ball set P/N: 53124. Also the rear diff has the two piece diff joint set up. Half plastic & half steel, that have to much play No good for brushless. So I fitted the all steel front diff joints, MJ1 & MJ2. Hope all this helps. Cheers
Thanks again, buddy! Yeah very useful information, since I just got a DF-03MS. Got a brushless system ready, so any tips are useful :-) I think I will try it stock first, and then see if any problems arise. Seems most people have problems with the rear diff. Either it slips when too loose or it melts when tightened.
Nice resto, looks good
Thanks, Will! Got a new DF-03 project on my channel now if you want to check it out. But thanks a lot for watching.
Love my Dark Impact, got sick of replacing ball diff until I found out other people were using super glue to lock it up. Now running 4000kv 500w brushless with no problems😀
Ha ha, yeah. With this one I just reassembled and tightened the rear diff after I found out it was melted :-) Works fine for runs that do not involve Racing and important cornering.
@@NordicRC is there a better diff you can get for dark impact maybey a geared one?
nice
I love DF - 03
I also own it
Cool! Love the DF-03 as well, except for the rear diff that keeps breaking down for everyone. Got a DF-03MS now and this one has been converted back to stock. Videos will follow :-)
Very nice renewal and great run! Love the Dark Impact. 👌
Remote Addicted Thanks! My first DF-03. Cool to finally be able to try it out.
Awesome buy my brotha! Looks great running👍👍👊👊📹📹
Steve Declark Yeah! Thanks, bro. Gotta get a new body for it and other shock towers, but otherwise I love the looks of it :-)
Sweet little rebuild and first run Mikael!! Glad to see you sent brushless with this one,Looking forward to seeing more of it :)
christopher coconis Thanks, Chris. Me too. Gotta get a new body for it and loose the massive front shock tower and go off roading with it!
Looks great fun👍
Jay Gazur Thanks, Jay!
Great video, seems like the shops are doing a great job.
Jesper Klausen Thanks, Jesper. The shops? Phone-autocorrect for shocks? Yeah. Just love them. And I know you do too :-)
Damn auto correct 😀
Great video... Really enjoyed this.. Thanks 👍
Thanks, Gav! Glad you liked it. Always good to hear from you.
This is inspiring me to get my keen hawk out and rebuild it and get it out for a run again. Thanks
Ahh the Keen Hawk. Beautiful DF-03 too. Hope you had fun with it! Thanks a lot for watching, bro.
What an amazing car you made of it! Congratulations! Unfortunately i lost all of my tamiya rc's on a fire...And right now i'm not able to afford a new one. Maybe with time i'll be back into the hobby.
Hope you'll get back into the hobby. Lots of fun, but just a hobby. Health and family, for me, is the most important thing.
Sweet and those shocks are good.
Basildon Trail Blazing Buddies Love them. Some of the best I’ve ever tried. How is your Dark Impact doing?
Beautiful wee buggy, nice vid 👍
Thanks, Richard!
To be continued... Never stop RCing.
jdpasl RC for Life :-)
Nordic RC Visions 🍺🍺🍺🍺🍺🍺
I received my DF-03 Dark Impact yesterday along with my second DT-02 Sand Viper. Sand Viper is a shelfer, almost no usage. Both are stock.
Niiice, Cosmo! Some excellent models. Love them both, stock or not :-)
You did a great clean up job mate. Good old soapy water. This really is a seriously good looking buggy. The wheels look good on it too. I remember we discussed these. I still haven't used mine yet. It's a shame they won't fit the DT-03. I Looked up the shocks on Modelsports website. £95 -110 euros, plus post ! I don't pay that for cars ha ha ha. They are good though, and no doubt worth every penny. You did well getting these. I'm really excited to see your new one. : )
WD-40, soap and water is essential when buying second hand models :-) Luckily my new DF-03MS has never been running so only need to get the shelf-dust off her :-) Yeah. I have two DT-02/03 sets and two DF-02/03 sets now. Love them. But I never buy them separately - only together with second hand models. That way the costs are much much less :-)
Great project, Nordic RC Visions! Like the way you cleaned up the buggy, and we can all appreciate the low-budget approach to the start of the project. Those shocks are sweet - Rob has the same set fitted to his DF-02 and they work just great. The DF-03 is very new to me too, but looks like it will be fantastic off road, with the suspension and ground clearance - impressive (and very brave) jumping on tarmac, but I winced every time I watched at 7:22 as the car goes out of shot... Really enjoyed this one mate, and a big thumbs up - looking forward to the next one :-)
Thanks, Mark! Yeah, sometimes it’s good to keep it low budget until one knows it’s gonna stay. Liked it so much I got another DF-03 coming up :-) Almost new so I will probably not go any further with this one. I just love these shocks. Got them on my DT-02 (in shorter versions) too and gonna equip my DF-02 and DT-03 with them too. I’m addicted to them :-) And yes, it landed upside down on the front shock tower out of camera. Each time I go here with a buggy that goes more than 30 kmph it goes wrong. Luckily it survived with only a very scratched up front tower but I stopped jumping it at that moment :-)
Ahh - glad to hear the buggy survived intact :-) Yeah the shocks are great but a little expensive - in a similar way I'm addicted to the Turnigy Trackstar shocks (you have probable noticed!!!) - they are very close in specification and performance to the Tamiyas, but a fraction of the cost. Must get me one of those DF-03s one day :-)
Lovely video !
I love this car, and i agree those shocks are great.
Try Traxxas anaconda tyres for road use, although they cost a bit.
The ball diffs have to be assembled correctly and i use ceramic balls as they will withstand heat more than the steel ones.
I'm also installed a slipper clutch, it helps.
The battery and engine compartment are very tight. I have difficult finding a proper brushless motor for it.
Thanks! You got one? Can’t seem to remember. But yeah, I’m liking this one very much, so I have actually already switched model to a DF-03MS that I purchased from a friend. Only build, never run. Looking forward seeing how it goes with the diffs on that one :-)
Yes i got 2. One of them is a MS. Although i don't drive that one. But my runner is full of hop ups so it's very close to the MS except for the shocks.
Very nice mate
Void X RC Thanks, my friend!
T-bone bumper are indispensable
RC PATAPOUF T-bone bumper?
Nordic RC Visions tboneracing.net/collections/dark-impact-df03 i used it
1:48 worn down? You should see my rear tires... near slick!
Yeah, ha ha, it can happen :-)
I've been looking forward to this, nice work and great video. It looks like a very capable setup and nice to drive. I've always been a bit wary of aluminium replacements, I had the shock towers on my DT03 which looked really bad after one tumble. I'll be interested to see how you get on with these parts.
Grumpy Granddad Stinky’s RC Dump Thanks, Grumpy. Yeah, quite nice set up. Need to sort out the ball diffs. And yeah, I like aluminium c-hubs and such, but shock towers can in some cases, like this with these massive blue ones, destroy the looks and ad a lot of weight. I actually scratched up the front shock tower too on this run. But no worries, as it needs to go whenever I get a new body for it.
I've started a thread on TC, The DT03 TRF Wannabe. I'm in two minds whether to fit a ball diff, they're pretty cheap from Hong Kong. Some say they're great, some say they're a pain in the butt. I might wait to see your video before I make up my mind. I should imagine it would be ok if it was set-up correctly, otherwise racers wouldn't use them.
I had the df03 keen Hawk édition but it's not sale now...
RC PATAPOUF It’s beautiful. Different. Like the DF-02 Aero Avante.
Nice video once again, this brings me back with my DF03 when I tried to run a castle cm36 5700kv motor on 3s lipo lol. The rear diff started slipping time & time again, so I fitted the DF03 Slipper Clutch set P/N: 53925. Hop-up Options 3mm Tungsten-Carbide Diff ball set P/N: 53124. Also the rear diff has the two piece diff joint set up. Half plastic & half steel, that have to much play No good for brushless. So I fitted the all steel front diff joints, MJ1 & MJ2. Hope all this helps. Cheers
Thanks again, buddy! Yeah very useful information, since I just got a DF-03MS. Got a brushless system ready, so any tips are useful :-) I think I will try it stock first, and then see if any problems arise. Seems most people have problems with the rear diff. Either it slips when too loose or it melts when tightened.
i really want to jump into this hobby, but to get one here in my country is waay so expensive :"
Yeah, I know. It’s sadly a real expensive hobby 😕