Very satisfied with this kit. Pretty easy installation. Quick help from tech. dept. got me squared away in a jiffy. Us old guys need more pictures. lol
Jason,the two wires that go to the head light switch and the single wire to the fusebox are what,positive ,ground, indicator power if so which is which.Doing some troubleshooting and need help. Cboo
If you have no fogs to begin with its more expensive.. if you have the center fogs and want to get rid of those and get the Ford cali fogs you can just use the 128$ ebay option which is a FORD OEM product. I am guessing you need the switches etc..
I have a 2014 GT and want to get rid of the big fog lights that come standard and replace them with these. Am I able to use the same stock harness with your kit so I won't have to do any re-wiring?
Yes you can - we actually have a separate kit that is specifically designed for the GT's. You can take a look at part# 3504 on our website at this link: www.starkey-products.com/mustang-gtcs-lower-valance-fog-lights-california-special-2013
Hi - you definitely can do it. We have a kit for the swap - please see the link below for more information. www.starkey-products.com/mustang-gt-led-fog-lights-conversion-kit-v6-gtcs-2013
Very similiar installation - the only difference is that the GT OEM LED grille-mounted fog lights use a different connector. You will need Starkey SKU#3513 to connect to the grille-mounted fog lights: www.starkey-products.com/mustang-fog-lights-converters-h11-led-GT-2013 If your V6 has factory lower valance fog lights that is all you need, however if yours did not come from the factory with fog lights you will also need a full wiring harness/ switch which we custom make for the 13-14 V6 and it can be found here: www.starkey-products.com/mustang-fog-light-wiring-switch-v6-boss-302-2013
Are you working on a 2013-2014 model year? The wire in question is only found on that year range. Another possible issue - sometimes over the years wire colors will bleed onto each other and change the appearance of the wire. In this case it would be best to isolate the wire by # - this wire is in the Pin # 13 location. Take a look again and see if that helps you find it.
I have heard that it won’t work with the factory fog lights, I don’t know if this is true or not but if it is then is there some kind of modification to do to make all 4 work together then?
Juan - As far as the wiring goes, it is a little easier on the 2005-2009 models than the 2010+. As far as the grille/ fog lights installation is concerned, that will depend on which grille you go with. The wiring itself on the 2005-2009 Mustang doesn't take more than an hour.
Hi - the bulb you need is an H11 bulb. There are many different options available but as long as its an H11 design it will fit. The easiest way to swap bulbs is to loosen a few screws/ remove push pins from the wheel well liner on the affected side. This gives you access to the rear of the lamp. Then you simply turn the bulb 1/4 turn, and it can be removed from the housing. Lastly, unclip the connector from the bulb. Reverse the procedure on the new bulb - be sure not to touch the glass of the new bulb.
@@darkvalic97 What part number wiring harness do you have? What wire colors do you have? I will need more information to diagnose the issue. Thank you.
Yes, we sell the wiring harness seperately. Please visit our website below for more information: www.starkey-products.com/mustang-fog-light-wiring-switch-v6-boss-302-2013
Hi Matt - it is similar, except that the 2010-2012 V6 is easier. Mounting of the lights and fog lights is less complicated, and the black wire that runs behind the dash is not needed on the 2010-2012. Unfortunately, we do not have a video at this time for those model years.
No this particular kit doesn't - you'll need our 2010-2012 V6 OEM Style kit. It is designed specifically for your vehicle, and the installation is actually a bit easier than for the 2013-2014's. You can find it on our website at the link below: www.starkey-products.com/v6-mustang-oem-style-foglights-kit-2010-2012
Starkey Products .. thanks... is there any installation video for the 2012 model????..... just one more question. why did u join two cables into the headligths switch????? I mean. i think you just need one cable to comolete the electric circuit and turn on the fog ligths.....sorry for asking. regards
No problem at all. Unfortunately we don't have a video for the 10-12 models, however the kit does come with a complete instruction manual. Without getting into the details, the 2 wires are required if you want everything to function properly. Thanks.
Starkey Products thanks . im from Peru. so if i irder ur kit it will cost around $600 due to shipping and so. I get aftermarket fog lights. please help me. I just need to know about the 2 cables that u wired to the switch (positive? negative? relay triger?) and about the last cable wired to the pass fuse panel.....what is it? please help me. Thanks a lot!!!!
Hi - The installation is very similar (easier on the 2010-2012 V6), but we do have a different product for those model years. You can read more about it on our website: www.starkey-products.com/v6-mustang-oem-style-foglights-kit-2010-2012
@@tlaxcalagg1458 Yes you can! You will need our #3551 wiring/ switch kit AND #3513 adapters - www.starkey-products.com/mustang-fog-light-wiring-switch-v6-boss-302-2013 www.starkey-products.com/mustang-fog-lights-converters-h11-led-GT-2013
Jason, you are the man! I love my kit. Highly recommended company with A+ customer service!!!
Thank you for the positive feedback!
That is so professional and stock looking. Very nice.
Very satisfied with this kit. Pretty easy installation. Quick help from tech. dept. got me squared away in a jiffy. Us old guys need more pictures. lol
Jason,the two wires that go to the head light switch and the single wire to the fusebox are what,positive ,ground, indicator power if so which is which.Doing some troubleshooting and need help. Cboo
So the Starkey kit is 250$ but you can buy the Ford kit that the Cali special cars use for $128 on ebay from a Ford dealership?
I wish I could find where you are seeing $250 for this kit. Prices that I see are at $399.
If you have no fogs to begin with its more expensive.. if you have the center fogs and want to get rid of those and get the Ford cali fogs you can just use the 128$ ebay option which is a FORD OEM product. I am guessing you need the switches etc..
I have a 2014 GT and want to get rid of the big fog lights that come standard and replace them with these. Am I able to use the same stock harness with your kit so I won't have to do any re-wiring?
Yes you can - we actually have a separate kit that is specifically designed for the GT's. You can take a look at part# 3504 on our website at this link:
www.starkey-products.com/mustang-gtcs-lower-valance-fog-lights-california-special-2013
I got a 50L with the same grill. Do you have any recommendations to change my grill with lights? Do you have a video?
Hi - you definitely can do it. We have a kit for the swap - please see the link below for more information.
www.starkey-products.com/mustang-gt-led-fog-lights-conversion-kit-v6-gtcs-2013
Hello is it the same wiring for the grill fog lighis ?
Very similiar installation - the only difference is that the GT OEM LED grille-mounted fog lights use a different connector. You will need Starkey SKU#3513 to connect to the grille-mounted fog lights:
www.starkey-products.com/mustang-fog-lights-converters-h11-led-GT-2013
If your V6 has factory lower valance fog lights that is all you need, however if yours did not come from the factory with fog lights you will also need a full wiring harness/ switch which we custom make for the 13-14 V6 and it can be found here:
www.starkey-products.com/mustang-fog-light-wiring-switch-v6-boss-302-2013
I do not have a white wire in my passenger side fuse box. Which wore do I use?
Are you working on a 2013-2014 model year? The wire in question is only found on that year range. Another possible issue - sometimes over the years wire colors will bleed onto each other and change the appearance of the wire. In this case it would be best to isolate the wire by # - this wire is in the Pin # 13 location. Take a look again and see if that helps you find it.
On a GT can this fogs be used in conjunction with the factory fogs?
The short answer is yes. However, in most states it is illegal to run more than 4 forward facing lamps at any given time. Just something to consider.
I have heard that it won’t work with the factory fog lights, I don’t know if this is true or not but if it is then is there some kind of modification to do to make all 4 work together then?
Is it the same process for 05-09???
Juan - As far as the wiring goes, it is a little easier on the 2005-2009 models than the 2010+. As far as the grille/ fog lights installation is concerned, that will depend on which grille you go with. The wiring itself on the 2005-2009 Mustang doesn't take more than an hour.
Hey, I got this a while ago. One bulb went out after a month. How do you replace the bulbs?
Hi - the bulb you need is an H11 bulb. There are many different options available but as long as its an H11 design it will fit. The easiest way to swap bulbs is to loosen a few screws/ remove push pins from the wheel well liner on the affected side. This gives you access to the rear of the lamp. Then you simply turn the bulb 1/4 turn, and it can be removed from the housing. Lastly, unclip the connector from the bulb. Reverse the procedure on the new bulb - be sure not to touch the glass of the new bulb.
@@StarkeyProducts Got it replaced, thanks!
What was the cost for the kit??
Hi Richard - currently the kit is priced at $299.99 and this kit contains everything you need including the OEM switch.
Why is the wiring harness that i got different from the video
What specifically is different about it? You should have received SKU# 3526 if you ordered a kit for the 2013-2014 Mustang.
@@StarkeyProducts the wire dont go to the fuse box inside the car
@@darkvalic97 What part number wiring harness do you have? What wire colors do you have? I will need more information to diagnose the issue. Thank you.
@@StarkeyProducts Sounds like he got the kit for cars that have OEM fogs in the grill.
Well this fit on a 2010 ? Mustang
I too want to know
Is there a way I can just get the wiring
Yes, we sell the wiring harness seperately. Please visit our website below for more information:
www.starkey-products.com/mustang-fog-light-wiring-switch-v6-boss-302-2013
Is this the same for 2011-2012?
Hi Matt - it is similar, except that the 2010-2012 V6 is easier. Mounting of the lights and fog lights is less complicated, and the black wire that runs behind the dash is not needed on the 2010-2012. Unfortunately, we do not have a video at this time for those model years.
@@StarkeyProducts thank you for the response it meant a lot
I'm not confident in installing the kit myself, can I swing by the shop and let you guys install it for me ?
Sir. Great video. Thanks for taking your time and breaking the steps down.
does this kit fit 2012 v6 base model?????
No this particular kit doesn't - you'll need our 2010-2012 V6 OEM Style kit. It is designed specifically for your vehicle, and the installation is actually a bit easier than for the 2013-2014's. You can find it on our website at the link below:
www.starkey-products.com/v6-mustang-oem-style-foglights-kit-2010-2012
Starkey Products .. thanks... is there any installation video for the 2012 model????..... just one more question.
why did u join two cables into the headligths switch?????
I mean. i think you just need one cable to comolete the electric circuit and turn on the fog ligths.....sorry for asking. regards
No problem at all. Unfortunately we don't have a video for the 10-12 models, however the kit does come with a complete instruction manual. Without getting into the details, the 2 wires are required if you want everything to function properly. Thanks.
Starkey Products thanks . im from Peru. so if i irder ur kit it will cost around $600 due to shipping and so. I get aftermarket fog lights. please help me. I just need to know about the 2 cables that u wired to the switch (positive? negative? relay triger?) and about the last cable wired to the pass fuse panel.....what is it? please help me. Thanks a lot!!!!
Hi Omarleus,
Email us and maybe we can help you lower the import cost of the kit. Thanks again
Will this work on a 2012 v6
Hi - The installation is very similar (easier on the 2010-2012 V6), but we do have a different product for those model years. You can read more about it on our website: www.starkey-products.com/v6-mustang-oem-style-foglights-kit-2010-2012
Can I use the same wires to install grill fog lights on a 2014 v6 mustang??
@@tlaxcalagg1458 Yes you can! You will need our #3551 wiring/ switch kit AND #3513 adapters -
www.starkey-products.com/mustang-fog-light-wiring-switch-v6-boss-302-2013
www.starkey-products.com/mustang-fog-lights-converters-h11-led-GT-2013