Unbelievable Tricks to Service Your Polaris Ranger 1000 XP
HTML-код
- Опубликовано: 12 сен 2024
- Servicing 2020 Polaris Ranger 1000 XP. We change the engine oil & filter, Transmission, and Ft diff. Also replace the air filter and look at how to reset the service hours on the machine. You will Need a 6mm Allen's for the crankcase oil drain plug. You will need a 8mm allen wrench for the front and rear drain / fill plugs.
Subscribe @TheRustyGarageandHomestead
/ @therustygarageandhome...
Contact me at
contacttherustygarage@gmail.com
----------------------------------------------------------------------------
Amazon Affiliate Links To Products in this Video.
-Polaris PS4 Oil Change Kit: amzn.to/3y5Ih4t
-Polaris AGL Transmission Fluid: amzn.to/3ygQtig
-Polaris Demand Drive Fluid: amzn.to/3WCkQsS
-Polaris Antifreeze: amzn.to/3A9a4kU
As an Amazon Associate I earn from qualifying purchases.
-----------------------------------------------------------------------------------------------
Polaris Ranger Playlist
• Polaris Ranger
Polaris ranger
polaris ranger 1000
#polarisranger
polaris ranger xp 1000 accessories
Polaris ranger oil change
polaris ranger oil change kit
#polaris ranger oil change kit
#maintenance
#1000xp
#polaris ranger 1000 xp
#polaris ranger xp crew
#side by side
#2022 polaris ranger northstar walk around
#2022 polaris ranger xp1000 northstar
#polaris northstar sunset red metallic
#polaris ranger northstar ultimate
#Polaris 100hr service
Amazon link to the Polaris PS4 oil change kit:. More links in description:
amzn.to/3WHYpCB
Excellent video! On your diff change, I was always told you should take the top plug out first and then the bottom plug to drain. The reason, if something happens and the top plug cannot be removed, you can still drive it to load it up.
Thank you for the comment. I've honestly never thought of it that way. That's not a bad idea. I do keep a spare plug on my toolbox just in case one of the allens starts to get loose. I can change it before it strips out. I had a plug strip out on me years ago on a dozer, and I was able to use a zip disk to cut a slot on the plug. Once I got it cut, I was able to get an impact screw driver to get the plug loosen and removed. Alot of work for a stripped out plug.
Nice job on the video. Thanks for documenting the service procedure. Your 2020 model is identical to my 2023. I just received all of the supplies to do the service. Thanks again.
Hey thanks for watching, commenting & Subscribing. Glad you enjoyed the video. I know it was strung out a little and not the best quality video or audio. That was one of my earlier videos.
Thank you. I Actually have one on order and I’m big on preventative maintenance. I’m greatfull that you made this vidio
No Problem. Glad the information was helpful. Thanks for watching.
Thanks for the comprehensive video! 👍
Thanks for watching
Best service video… thank you!
Thank you. Thank you for watching.
Good info and procedures here Mike!! …thanks a ton for making the vid!!
Thanks for watching
You are the man. Much appreciated!
Thanks for watching. Hope it helped
I have a ranger XP 800 just got ot last last fall probably close in procedures I'm guessing. Just saw your channel on Kennys Open Air Aventure so I'm also a new subscriber, Im aiming for a thousand subs too but slow going lol.
Hey thanks tucker I'll sub to yours as well.
I haven't messed with any 800's but I'm sure they are close to the same procedure.
@@TheRustyGarageandHomestead Thanks for the return Sub , hopefully you'll find something you like
Very helpful video...thank u
Hey thank you for your comment and thanks for watching.
Great video 👍
Hey thanks for the comment. Thanks for watching
Do you have a video of where all of the grease zerks are?
Thanks for watching. I do not, but There are only 3. Two on the rear stabilizer bar and one on the prop shaft.
The older 900's had I believe 17 grease fittings. When they made the xp1000 the beefed up alot of the bushings & bearings and made them non greasable.
@@TheRustyGarageandHomestead so I have had 2 xp1000s and I can only find the two for the sway bars on the front and rear, where is the one for the prop shaft?
under the machine there should be a small hole in the plastic skid plate to access it. If not you may have to pull the skid plate. hope this helps. @@grantklopfenstein
@@TheRustyGarageandHomestead is there just one on the drive shaft or two?
Things happening to my 2020 that makes me mad I didn’t buy a Japanese model.
Thanks for watching
Would you care to elaborate what things are happening to your Ranger
I was confused by that comment as well. Thanks for watching James.@@JamesWhite-tg4kw
@@JamesWhite-tg4kw prop shaft u joints, wheel bearings goes dead for some reason when you first start it and back it out of the garage sometimes. It’s a 570 full-size just hit 300 hours almost 2500 miles. Those are things I’ve replaced and just noticed the lower control arm bushings Need to be replaced on the front end.
Well I'm sorry to hear all that. I hope my 2023 has better parts on it 😳