WOW! I resolved this problem more easely, just make a hole on the top of the cartridge and remove the toner (clean the area and use a tape to seal te hole and put back the cartridge on the printer 8D). (sorry for the bad english)
+Ilias Face a hole can be made only by heating (to not fall into the toner compartment of small pieces of plastic) but ..... Why to work hard when it's so simple refill? You just need to remove the side cover drapta and below there is another smaller cap where toner pour! Video refilll MLT-D116 here ruclips.net/video/Q-eZP5VPy7E/видео.html
I still cannot print on my samsung printer because the counter chip is past the limit. Covering the contacts with tape causes a different error and still prevents printing.
Very nicely explained in a simple manner. Thank you!
WOW!
I resolved this problem more easely, just make a hole on the top of the cartridge and remove the toner (clean the area and use a tape to seal te hole and put back the cartridge on the printer 8D).
(sorry for the bad english)
+nemovox how do you do that? give some info!
+Ilias Face
?
+ereset com to make a hole on the drum and clean it. ok i did it. Can i do tha same for the toner?
+Ilias Face
a hole can be made only by heating (to not fall into the toner compartment of small pieces of plastic)
but .....
Why to work hard when it's so simple refill?
You just need to remove the side cover drapta and below there is another smaller cap where toner pour!
Video refilll MLT-D116 here
ruclips.net/video/Q-eZP5VPy7E/видео.html
I am getting error Imaging unit not compatible how to solve that?
Printer model?
So after cleaning do you need to reset the chip/printer. What is the tape over the connectors for? Thanks for the help.
I still cannot print on my samsung printer because the counter chip is past the limit. Covering the contacts with tape causes a different error and still prevents printing.
How to cancel cip from cartridge and image unit ://www.ereset.com/samsung-sl-m/fix-firmware-reset-xpress-sl-m2670-m2675-m2870-m2875-f-fn-fd-fw-3/
:( ho fatto tutto ma alla fine non viene riconosciuto... il "cerotto" sopra il chip non serve.
Xerox fix firmware reset www.ereset.com/reset-xerox/