Vaporesso VAPE got wet! ~TAROT BABY DISASSEMBLY~ACT QUICK! Open, broken, fix, tear down.

Поделиться
HTML-код
  • Опубликовано: 10 ноя 2024
  • The best way to open your Tarot baby vape. Open to fix & repair broken vape or retrieve spare parts.

Комментарии • 25

  • @manadew
    @manadew 4 года назад +3

    You are a life saver for this. I never would have figured out the screws were there. Thanks for your video!!

    • @tikicreep
      @tikicreep  4 года назад

      Happy it helped out! I didn't post a follow up video but the Vape did come back to life and I still use it today. After about a week remove from dry rice & put it on the charger.

  • @anderm14
    @anderm14 3 года назад +1

    Cool, this worked on my Tarot Nano also. The 510 socket had receded over the years so it didn't make contact with the atomizer. I used a razor blade to get under the decals. Just be careful not to let the buttons get loose because I couldn't put the mode button together again but I never use that one anyway.

    • @tikicreep
      @tikicreep  3 года назад

      Cool! In hindsight I should have posted a follow up video because it fixed mine too. Got to be patient and leave in rice for several days.

  • @mohammedomar2340
    @mohammedomar2340 5 месяцев назад

    Thanks for sharing the disassembling ❤️
    i have two tarot baby ❤️❤️
    one have loss centre pin base. i tried with super glue
    but came back again.
    any ideas for fixing it.

  • @chugalug
    @chugalug 4 года назад +1

    Cheers for the quick vid. Been wondering how to get into it without causing it too much damage. Bottom tab on the fire button panel is broken so the panel flaps around.

    • @kinetickill1763
      @kinetickill1763 3 года назад

      I have the same problem reason why I found this video. How did you fix it? I was planning on taking the mod apart to super glue the broken tab.

  • @aherbster
    @aherbster 4 года назад +1

    is it possible to change the batteries?

  • @auriceliosoares2109
    @auriceliosoares2109 3 года назад +2

    I'm from Brazil and I would like to know if you can change the battery and what would be the model

    • @tikicreep
      @tikicreep  3 года назад

      I'm not sure. If the voltage of the replacement battery is the same as the one that is bad it should work. And the new battery fits inside the vape.

    • @tikicreep
      @tikicreep  3 года назад

      And ohms Ω need to match too.

    • @auriceliosoares2109
      @auriceliosoares2109 3 года назад +1

      @@tikicreep ok thank you very much

    • @hizokaomar6062
      @hizokaomar6062 3 года назад

      Por lo que entiendo es una batería de 2000 mAh (litio?), y el numero W192646P que sale ahí, son las medidas (19x26x46 mm), he buscado en Alibaba pero no he encontrado una igual ....

  • @mrkiss3
    @mrkiss3 4 года назад

    My screen stopped working should I open it up . It still works but no screen???

  • @samarmanjeshwar9665
    @samarmanjeshwar9665 4 года назад +1

    How'd you get the decals off so easily?

    • @tikicreep
      @tikicreep  4 года назад +2

      A small flat screwdriver. It took a little effort to get the narrow part started. Don't jab yourself accidentally!

    • @samarmanjeshwar9665
      @samarmanjeshwar9665 4 года назад

      @@tikicreep thanks! The charging port on the device is busted. Do you think there's anything I can do to fix it? I was trying to replace the batteries..

    • @tikicreep
      @tikicreep  4 года назад +1

      Probably not... even with a soldering iron the space is too tight. IMO

  • @WombyV
    @WombyV 3 года назад

    i have the green colored one and i cannot get into it please help?!

    • @tikicreep
      @tikicreep  3 года назад

      Remove stickers to begin. Don't cut yourself!

    • @WombyV
      @WombyV 3 года назад

      the green colored version which i have seems to be scratched only, it can't be pulled out

    • @WombyV
      @WombyV 3 года назад

      Or removed

  • @aquosoft
    @aquosoft 3 года назад +1

    129 / 5000
    Good Morning. Greetings from Argentina.
    Could you tell us the battery model?
    translated by google translator. Sorry
    (Buenos días. Saludos desde Argentina.
    ¿Podría indicarnos el modelo de la batería?
    traducido por el traductor de google. Disculpas)

    • @auriceliosoares2109
      @auriceliosoares2109 3 года назад

      I'm from Brazil too and I would like to know if you can change the battery and what would be the model