The process of mass producing LEDs. LED headlight factory in Japan.
HTML-код
- Опубликовано: 1 май 2023
- The process of mass producing LEDs. LED headlight factory in Japan.
👁 Nippon Lighting Co., Ltd.
☎️ TEL:+81-6-6488-1333
🏠 nihonlighting.com
🚩 goo.gl/maps/Kq9PhyqeHJYi8bbH9
💌 Contact : processx2@gmail.com
📸 Copyright(C) 2022. Processx. all rights reserved.
The extra care, dedication and process they use for this manufacture speaks for Japan's great quality products. Wouldn't expect anything less.
i understand why japan is one of the best country in this little world of quality in hifi and handcraft manshift
@@Bulldog_DK Also know that a lot is designed in Japan but produced in China for them.
Extremely high-end automation machinery combined with manual craftmanship is very satisfying but these products must surely be some of the most expensive on the market.
@@YouCanHasAccountтак и есть..Китайцы их уже обошли.
私も製造業ですが一般の製造業と言えばNC,ロボットのオンパレードで自分のやっていることは時代遅れもいいとこだなぁと日々感じて作業していましたがこのビデオを見てほっとしました。
Thank you for adding subtitles.
It is very helpful and easy to understand.
0:41 A6063 is Aluminium alloy 6063, a medium strength alloy of 97.5% Aluminium, 0.45% Magnesium, and 0.20% Silicon. It has a good surface finish and high corrosion resistance.
Your mom called and said "Thank you."
Actually the percentage of aluminum varies between 97.5 and 99.35%.
Magnesium between .45 and .90%.
Silicon between .2 and .6%.
It's also highly weldable and has varying tensile strengths.
Thanks for that information, I’ll definitely use it in my everyday life
Good machinability too
@@Nikkk6969молчи..
Japanese Precision and Quality ❤
Respect from Italy 🇮🇹🏁
ビート専用のLEDヘッドライトバルブ(702K.H4H)を作っていただき、ありがとうございました。
かれこれ3年使用していますが、全く問題無く使用出来ています。
ハンダ担当の職人感が凄い。次は日本ライティング製品を買おうと思います。
生産効率が低く、中国ではまったくお金を稼ぐことができません
これが日本の本来の製造技術だと思います。素晴らしいの一言です。
日本人が欲しい日本製品ですね。買う機会が有れば必ず買う
The engineer in me looks at every step of this production and keeps thinking of ways to automate it.
I am too far gone.
Ps: especially the pick and place output. Why have someone handle the boards and not just put the reflow oven at the end of the pick and place?
That’s exactly why they cost $300.00 a pair.
手持ちの三台とも愛用しております。
こうやって製造しているのか?と感心しました!
いつも愛用させて頂いております!!
明るくてとても助かっています!!
Love these videos on Process X channel! Along with others, I humbly ask that the music be removed so we can just hear the machinery except if there is no other sound, of course.
Un usine très compacte, à la pointe du progrès. Cependant pour finaliser le produit des techniciens sont présents. Un produit de grande qualité.
Parabéns pela qualidade e capricho na fabricação.
Ничего с неба не падает.За каждой полезной вещью стоит труд людей.
В путинской экономике так и живут уже 25 лет - все на другие страны рассчитывают, что сделают за расеюшку, а мы только покупаем
Très intéressant, merci!
Great stuff, congrat's from France !
WOW - That is more work than I thought. MADE IN JAPAN
Très impressionné par le travail méticuleux, passionné et professionnel de chaque intervenant ! Je rêve de venir travailler dans votre pays. La culture du travail fait toujours au mieux ... Ça me manque ... En France, aujourd'hui, on ne fait que du médiocre ou du passable, et tout le monde s'en contente ... Moi ça me rend fou !
Bravo à vous. Grand respect pour votre travail et vos attitudes !
2本で3万円くらいしますが、この工程だと納得です。
Не знаю в каком году снято видео, но если это фары ручной японьской сборки, страшно представить сколько оно стоит. Выглядит как неплохое производство в 2000г., но точно не в 2023г.
$300 за пару, на ebay
One of the most satisfying three words "Made in Japan"
It looks like those LEDs are made for cars.
not with fan cooling they arn't
Also motorcycles.
Really interesting, but don't put the music on. Much better with just machine noise
Parabéns ao povo Japonês, que belo trabalho 👏👏👏👏
Đồ điện tử của Nhật Bản thì khỏi chê chỗ nào. Có tiếng từ trước đến nay 🇯🇵👍
The LED lights must be very expensive.
Schön zu sehen mit wieviel Sorgfalt dort noch Produziert wird 👍👍👍 Danke fürs Hochladen! ✌️
É tão perfeito, quanto interessante!
Wow Made in Japan !!!
Good video ! Great work !
Those pick and place machines ^....^
So satisfying to watch.
The cream of the crop, highest quality LEDs. So superior to the other country's import cheap LEDs.
اجمل تحيه للشعب الياباني انا عندما اقرأ في الاجهزه اسم صنع في اليابان يصيبني الامان العالم بدونكم ضائع تحياتي لكم قمه المصداقيه عراقي مر من هنا
ハイエースに取り付けしてます フォグランプ ヘッドランプにつけてます
6万円ぐらいかかりましたが 文句なしの明るさです
日本ライティング最高です
Японцы, я вас обожаю. Как же аккуратно все. Неспешно и с ответственностью ! 💪👌
ты хрен когда эти лампочки купишь..да и нафиг надо тоже не понятно, вон, их роботы миллион тойот собирают, а тут..несчастная лампочка.
Everything is perfect 🥰
It's not LED's it's led devices, there are a huge difference
i feel the quality of the product while im watching
"cream solder" is normally called "solder paste"
Yes but that doesn't sound anywhere near as tasty
Crěme la solder
I’m sure it’s called cream soda
Sono tutti macchinari molto costosi di ultima generazione con grandi possibilità 👍
モルドバからこんにちは、私は日本が大好きです。アマチュア無線家として、「Made in Japan」と書かれた日本の技術やエレクトロニクスが大好き 日本語も英語もわからないけど、
Very neat work, no detail is overlooked !
Bit of light entertainment 😊
I was surprised to be almost of process is hand making!
After having seen a large number of these kinds of videos, even if I hadn't read the title or seen the language of the text on parts etc. in the video, it would be INSTANTLY obvious this wasn't a factory in China (let alone a ramshackle Indian operation with all the workers in flip-flops and working on the floor). The exquisite and *extreme* attention to detail, the carefulness in handling the product, the cleanliness and highly orderly nature of the facilities, the meticulous quality control (thermal infrared imaging of final product to ensure even heat dissipation) even the overall relatively low ambient noise level of most of the workspace (I can hear sounds like gloves brushing against packaging) all point to one self-evident conclusion: Japanese culture of quality - "Kaizen".
maybe this is only "prototype video " for youtube ,or they make low series items...
Masterpiece🙌🏼
Такие здоровенные станки для платы 20х20
That's very interesting to look at. But there's a lot of manual work!
Словосочетание "массовое производство" зазвучало для меня по новому (как Красочная картина Малевича " Чёрный квадрат")...
Looks expensive with a quality that's gonna last for years
If this really is the manufacturing process of these LED-lights, they must be pretty darn expensive.
ty for the video. i was surprised how much manual labor is involved, i guess they dont produce high amounts of each type of lighting or there would be more automation. and the production machines are very slow compared to what i am used to especialy the milling. the turning would be done in a machine where the material is automaticaly loaded through the turning spindle. so depending on the quantity produced, there is a lot of room for optimizing. im sorry, dont want to criticize, just that i was constantly involved in improving processes in production that makes me wonder why.
As you say, volume is probably too low to go for full automation.
😀👍 Interessante, eu não sabia que era tão trabalhoso assim produzir led, belo vídeo eu gostei obrigado a todos e bom trabalho.
Eu pensei que ela tudo robos que fazia tudo sozinha
Na verdade eles não produzem o led e sim a carcaça e driver que os alimentam. Os leds são produzidos do mesmo jeito que se produz processadores, memórias e outros semicondutores.
Uma coisa interessante é que não existe led branco. Na verdade a cor que ele emite é azul mas possui uma capa ou máscara amarela que junto da luz azul do led faz ela dair Branca.
Eu acho que é mais jeito manual de fazer as coisas mesmo. Eu duvido muito que uma fábrica em série chinesa não seja tudo na base do robô. Nota-se também o cuidado que os japoneses têm na fabricação das coisas. Eu acho muito mais bem feito um produto assim, doque aqueles que saem em série aos milhões.
@@R4NIERIверно👍 они свои тойоты миллионами роботами собирают, а тут несчастная лампочка.. 1% от машины и столько внимания. Они бы так свою тойоту 1 штуку в год выпускали)))
Beautiful
Вот уже который раз отмечаю сочетание высокотехнологичного оборудования и ручного труда. И видимо это оправдано если судить по результату - отличному как всегда.
Скорее всего, это или государственная социальная политика, или это НЕ массовое производство. Японцы целые автомобили собирают на автоматических конвейерах, а тут вдруг столько ручной работы на изготовлении светодиодных ламп. Так что из двух одно: или борьба с безработицей, или элитное производство.
@@user-mg5rm9gb5z да обычное малое предприятие. таких и у нас навалом
@@Eric-iw3ep, ну, малое, это понятно, непонятно только: чем обусловлено его существование?
@@user-mg5rm9gb5z спросом на продукцию
@@user-mg5rm9gb5z видимо мода быстро меняется а спрос не такой уж большой. Строить автоматическую линию, которая будет выплевывать их тысячами видимо не выгодно. Не факт, что это работают японцы. Они берут всяких практикантов итд . Видно, что операции простые и их любой выполнит.
I would like to see how they manufactures the actual diode.
các bạn ấy thật giỏi
Japan Always the Best quality
За таким процессом можно наблюдать вечно, Благодарю с Уважением...
В свое время Чубайс обещал наладить выпуск светодиодов, потом разворовал все, и на этом все кончилось! Сейчас не в тюрьме, процветает!
@@user-yo8xo3lu8i Какие проблемы ьбыли не голосовать за путина, того и глядишь такие же заворды появились в Росии
صناعه يابانيه محكمه وبأتقان وجوده عاليه
日本の誇り
LOS JAPONESES SON EXTRAORDINARIOS
Thời đại bây giờ người ta xài bóng đèn LED rất nhiều. Mặc hàng này bán OK 🇯🇵👍
The Japanese were always in first place in electronic development! 👍
Excellent
日本製造真的很強 品質超好
之前買淘寶貨 一開始是禁運 改地點 買回台灣
用沒三個月就變暗壞了
Como siempre Japón con los más altos estándares de calidad , el nade in Japon es garantía de alta calidad
Best of Best 👍
このメーカーの3年使ってる、ほぼ手作りなんだねびっくりした
LED色々試しましたが、少し高くてもやはりメドインジャパンが1番です。
JAPAN QC is No.1 all of the world. I hope to keeping
Отличный продукт!
those look expensive
Super !
Nice 💯
Когда смотришь, становится понятно, почему всё японское работает так долго.
Это точно!
Поэтому японская техника и автомобили самые лучшие и надежные!
Сам владею тойотой короллой 2008 года, сборка япония и до сих пор все родное!
Ну расходники я не беру в рассчет, диски, колодки, аккумулятор и прочие, но сам факт что 15 лет машине и все работает, это говорит о том что япония это другая планета! 🥰
This factory really needs to look into a better machining floor layout. One mill-lathe with an automatic bar-feed is a single process cell that could entirely replace three stations of their current sequence.
I suspect that these are limited runs. It probably doesn't make sense to optimize with a y-axis lathe.
@@moki123g it's not like they couldn't still improve by batching on a y-axis lathe. Lots of those parts are just milled rounds. A few of them might need a second spindle if you wanted to run them lights out like a cool kid, but it's not like you have to do the whole thing like that. Even bar feeding the existing lathe would be a notable improvement.
I'm thinking about changing the headlight of my car. Very good timing lol.
Nihon Lighting seems to more expensive, but very well made.
yeah any idea from where can we buy these?
Tek bir eksiği var bilmiyorum belkide test yapılıyodur videoda göstermemişlerdir bi far aynasına takıp karşıya yansıması nasıl bakmıyorlar yap takıştır gönder gibi geldi özellikle h4 lerin bu teste sokulması lazım uzunlar kısalara göre %50 zayıf kalıyor genelinde birde h4 lerde başlığında uzunlar bi yönde kısalar diğer yönünde olsa daha iyi olur bence dik duruyo montajında ve gereksız işe yaramaz bi şapka var bence h4 ler biraz sıkıntılı
Огромный отдельный лайк только за аккуратность, качество и точность при сборке! Об остальных моментах тоже на высоте!👍🔥
Это точно!
Поэтому японская техника и автомобили самые лучшие и надежные!
Сам владею тойотой короллой 2008 года, сборка япония и до сих пор все родное!
Ну расходники я не беру в рассчет, диски, колодки, аккумулятор и прочие, но сам факт что 15 лет машине и все работает, это говорит о том что япония это другая планета! 🥰
При такой кропотливой, я бы даже сказал вальяжной сборке - боюсь представить сколько такие лампы будут стоить. Но т.к. это сделано в Японии, то скорее всего лампы крутые.
@@Stas007 Та ёпта... У меня я Опель 15-ти летний, брал с салона. Сейчас в великолепном состоянии и всё родное, кроме расходников.
Ну так и чё? Причём здесь Тойота и какое-то там японское качество?
Куда уж нам, лапотным... А вот у НИХ!
@@bomjahed Херня у них.
До Опеля был ВАЗ2105 80-го года. Когда продавал, ему уже было 30 лет. За машиной следил и она была в очень неплохом состоянии. Кстати и продпл недёшево. Так что вот так. Тойоты тут и рядом не стояли.
Looks all of process take a lot of cost.
"Solder paste " is the more accurate word.
Столько ручного труда! Как будто 20й век.
в Японии особым уважением и спросом пользуются вещи произведеные ручным трудом
поверьте у них есть и высокотехнологичные производства с роботами, но и полно маленьких предприятий с ручным трудом
คุณภาพมาตรฐานของญี่ปุ่นดีมากๆต่างกันมากกับผลิตภัณฑ์จากประเทศจีน...จีนสามารถก็อปปี้เลียนแบบได้ทุกอย่าง ราคาไม่แพง แต่คุณภาพไม่ดี เสียหายชำรุดง่าย 😊😊😊😊
test süreci çok iyi olmuş elinize sağlık
メーカーは違いますが
LEDに替えてから4年以上経過
長く使える事を実感してます。
Net通販で視られる様な
低価格品では無い優れた品質だと思います。
Japan
the hand carry between in the PCB assembly line. Never saw this before for regular production. i guess this qualifies for a sticker "hand made".
What a beautiful product. I am impressed by the amazing care and testing that goes in its manufacture. Obviously Japanese!
Особенно понравился ржавый чугунный пресс для развальцовки заклёпок!
So great, only Japanese products will never let me down 👍👍👍
except Takata Corporation-made airbags, those can let you down for sure :D
DMG MORI will help you automate some of the aluminum machine processes.
So much manual labour for a headlight? They must be special and expensive.
Jetzt ist auch klar, warum die so teuer sind. 👍
日本製 👏🏻 ̖́-
Made in Japan always the Best
Cuanto trabajo manual!
プロセスX
👍👍👍
At 9:45 they use digital microscope for inspection. Does someone recognize the model and brand? Video that they get is of good quality and high frame rate, I would need something like that for my electric work.
it's XGA Digital Camera ~