If Infiray will make a refined version with: -Non-proprietary glass -LEMO port battery options -A ruggedized version with aluminium housing I would get one asap!
Honestly, just having the option to not use the Jerry 31 level lenses and put on Carson lenses would be enough for me! It's the only thing stopping me aiming for one. Currently just gonna save for Katanas or Argus 1431.
How do holographic sights with “night vision” settings perform in your experience with the jerry FB on right eye dominant shooting as you were mentioning about red dots at 19:10
Starting new job this week, will be starting new savings pile to pick these up. Likely will get there in a little less than a year if I'm aggressive with it. Never could get my breach to collimate due to mount and setup preferences.
Do these only come in green? Is WP an option? How’s the FOM, clarity and battery life? Are they water resistant to a certain depth for a period of time and what temperatures do they work in? I’ve been running the L3HARRIS GPNVG for a couple years. They’re slick, but adding a thermal element to your nods is next level. I tried to combine a thermal tube with a pvs-14 and it was turning into a nightmare trying to find two that would bridge properly with an adequate battery pack.
For years I always thought having a NV setup was unobtainable for me. Now that I’ve had one a couple years I really want thermal but I know I’ll never be able to afford a nice thermal or overlay setup. Maybe one day I’ll get a handheld unit to keep in a pouch and have a lanyard for if I wanna wear it around my neck. Would love to have it helmet mounted but everything like that is crazy expensive
Honestly having a little thermal monocular in your pocket for a quick scan here and there is probably the better set up for most people anyway. All you need the thermal for is it show you where to look with your NV. A mid tier thermal will do that really well for you. If you got the nice nods with very good identification range, all you need is a mid thermal cause even mid to low tier thermals have high detection range but poor identification range. NV is basically the opposite, good identification with poor detection. A sub $1000 thermal monocular will get your detection range up into the several hundreds of yards. The bust out a rifle scope to look through with your NV or something to ID from there. Even one of the 300-400 thermals will bump your detection range up significantly if you just use it for periodically scanning for detection only, then leaning heavily on your NV to do the rest. It’s by no means ideal or the best, but for the cost it’s hard to argue with. A 400 dollar thermal paired with a pvs14 used in this manner is a major boost in capabilities over someone who only has NV. And for less than the cost of a Wilcox mount lol. As a stand alone device they’re fairly poor quality and not very useful, but paired with a highly capable device like gen 3 nods, it’s a big boost in capability.
You can get Jerry 31's and their C5 clip on thermal imager for $8,000 together. That doesn't account for a helmet, mount, or IR device. But most people can save over a year or so and be able to afford some form of night vision.
I think I'd want the thermal on the left eye! Is it switchable? I'd assume not. Thus allowing the right eye on an actual thermal riflescope, , , anyway,,,
Gonna start saving next month, should have it four months after that. International export is also a big selling point. Could you say a few words about it's navigation features?
Can the lenses on these be changed out for PVS 14,15, or 31 lenses? The lenses on these are awfully small and I've seen a lot of chromatic aberration in their other products.
the thing i dont like, is having a gps locator on it or bluetooth, if that stuff could be removed porb would interest me more. i just want nv + thermal no need to have a skynet locator onboard too.
@@zr6671 I am not sure of the Bluetooth aspect, however the battery pack on the JFB has the GPS markings and function on the battery housing. The CE5 pack is just batteries. Bluetooth is less concerning than GPS obviously due to distance limitations. I’ll be playing more with all of this as I keep using this unit. 👊
Where do i just find a 1x for my pocket or home? I have several thermals for weapons. Need around the house and running around where wide angle up close is would be great.
The mandatory included gps and wifi adapter made me say no unfortunately, ecoti at least doesn’t have external connectivity as far as I can tell. Was so damn excited, the l3 Harris ones are l.e. only still all this time later, I’m pretty sure they’re connective as well unfortunately
We would choose to have some sort of thermal for most scenarios. If driving, the binos are nice. You could consider something like the Infiray outdoors CBL19 as a handheld without spending a ton. We stock those for that reason.
From watching your side-by-comparison view through the two setups, in my subjective opinion I would tend to prefer the Vyper + Jerry CE5 over the Jerry FB, as the view through the former appears better integrated and more seamless than the latter. The white hot of the Jerry FB's integrated thermal image is poorly paired and a mismatch with the green phosphor of its NV image intensifier tubes. Just doesn't look right, not well fused. A much better match and seamless integration and fusion is the Jerry CE5's white hot with the Vyper's white phosphor NV image intensifier tubes. Additionally, again in my subjective opinion, I find annoying and a needless distraction all that digital clutter of symbols and figures on the Jerry FB's screen. Hopefully all that clutter can be removed through a configuration setup option to give a simple, clean image. Would love to see some images/video of the view through the Jerry FB once you figure out how to install white phosphor NV I2 tubes in it, and remove all that digital clutter from the screen.
Go check out one of our latest videos called "Thermal Caught Escaped Killer Danelo Cavalcante" We show the Jerry FB with Elbit white phosphorous tubes in that video! After you watch that video please let us know your thoughts. We think your opinion will change.
I hope you guys see this but I’m getting ready to buy my first pair of night vision and I have the money to rather get a pair of 1431 BMVDs in green, or I could get these, these 2+ and the other ones are GEN three so I’m just curious if there’s any big difference or if the juries would just be better because they’ll be a little bit less they’ll be about $400 less than the 1431s. I really need help from someone thats not gonna tell me yes because they want me to buy it or no because they want me to buy the other one. I want a straight answer from a company that works with night vision, or anyone else that isn’t looking for me to buy their set. unless you got a used set in good condition hehe;)
It's cool and 18,000 dollars cool!!! haha. Do a giveaway. I'm currently battling cancer (rare leukemia) and these will save my life. Okay, they won't save me, the targeted chemo will and likely these are known to the state of California to cause cancer hahahahahah. What a cool ass video you guys made. Thermal is incredible from ABOVE. I served in the 90's at Hurlburt on the gunships. You can run but you'll just die tired.
You actually don't need to turn the thermal off. It's not like when looking through a thermal only unit, where looking at glass is just blacked out. I was surprised when I looked through windows; the nvg image sort of just keeps working so it's like you're looking through nvgs as per normal and the thermal doesn't "block out" anything.
Core Vision Industries was, might still be, releasing a unit just like this. I say maybe because their site is gone and Facebook page has been dark since last year. Really cool looking design. Shame if it’s dead.
@lamppost904 yep and no response on Facebook. They killed their instagram a while ago due to censorship so that's a no go. He moved from LA to Tennessee a year or two ago and after that sort of dropped of the radar with minimal updates.
Hypothetically, how concerning would it be to have this device with the Chinese software in it should we find ourselves in a conflict with the other side of the world?
The worries of a Chinese killswitch are not entirety unreasonable, but consider that the US has passed legislation to have killswitches in all of our cars. There is no promise that anything ever will be 100% clean unless you designed and fabricated it yourself.
Super cool unit. I currently have set of l3 dtnvs with a Jerry c but have always been interested in this unit and one I wish I could see in person. Do you think there is any large benefit other then price difference between the Jerry C and this? And which do y’all prefer to run with all things considered? Also do any chance they make this unit in a quad tube style housing in the future. Seems like wider FOV is all the rage these days.
Yes, this surpasses the C in almost all respects simply due to the clarity of the unit. The CE5 video drops in two weeks and we do more comparisons. This is like having an RH25 fused to your binos, which is insane. That doesn’t mean the C or CE5 are bad, just that they don’t have the capabilities of this bino in terms of thermal clarity and detection or seamless experience.
I don't know if you can answer this: I can NOT look through binoculars, my right eye shuts down for me to see (left eye dominant, right handed). What do you recommend if I'm trying to get into NVG? I like the idea of NV on my right eye and thermal on my left, when I shoot a rifle I use my right eye, pistol is all left eye
If you get a thermal and tube you can hold them by hand and see which eye likes what. If there's anyone that does NV classes nearby maybe they can let you demo theirs. But straight up thermal bridging with a dedicated thermal scope + 1 tube is hard, the images won't line up perfectly because they're built different. I think the ideal is binos + some kind of COTI.
You can run a PVS14 on either eye and there is no right or wrong. With binos, you'd need to train yourself through it. It certainly IS possible, many people have done it. It will just take hours and reps. There is a benefit when in total darkness as your eyes ONLY have the optics to look through. I find that makes it easier than standard daylight binos. Even with a bridged setup, you can keep the 14 on your dominant eye for shooting, a thermal on non-dominant for scanning. Whatever works for you is right for your situation. Hope that helps!
You really think a Chinese housing is equivalent spec, build and electronic wise to a ENVGB? The ENVGB has probably hundreds of millions sunk into its IP and research with decade plus of development from the PSQ36, PSQ20 and other systems. They’re comparable in relation of what they both do but obviously the ENVGB is far superior to this. Like hell the glass quality on this unit requires your eye to be a half inch or less to fully get the sight of the tube and thermal overlay.
For the thermal it does not show true heat gradients between the hot and cold, it looks like a negative that has slightly enhanced contrast... This is not a real Thermal... Thumbs down for the Barry clip😢
Have you ever made a video that is something you don’t sell being the best thing smoking? That Chinese crap is not to par. I have all that crap, 31a’s with the Jerry c, quads, Jerry Fb, Rico 25, all the crap. All are good for different things. I sure wouldn’t trust my life to the FB though. Especially in a CQB situation
Understandable. Most customers rocking thermal rigs with a PVS14 are already into their setup 10-12K. The extra $3K will absolutely be worth it for some folks. Thanks for watching!
@Arkayne Realy good to know the tech is getting better for everyone. My unit tested the first issued NOD/Thernal hybrid units back in Afghanistan 2011. Very good fusion mode.
Watch it, learn about the tech, and start a plan to save money. This video isn’t about selling a $15K unit, it’s about educating people as to where the tech is headed.
Holy, this is amazing and especially at that price point considering the L3 version is only MIL and they are for 50k per pop. Most of these ReTaRdS in the comment section don’t know what they are talking about and take Lucas a gospel without a doubt of any info that’s truly sorted by themselves, that coming from a Lucas Big proponent of his Normalization of what the 2nd really is about. Anyways moving from that tangent, good job on these I’ll be picking a pair soon to test it out
Reminds me of the nvg's that Sam Fisher uses in the Splinter Cell games
The tech is amazing
Great video. One of the first to really go into the pros and cons of bridged nvg and thermal, dedicated fusion and clip on fusion. Thanks a lot.
If Infiray will make a refined version with:
-Non-proprietary glass
-LEMO port battery options
-A ruggedized version with aluminium housing
I would get one asap!
Honestly, just having the option to not use the Jerry 31 level lenses and put on Carson lenses would be enough for me! It's the only thing stopping me aiming for one. Currently just gonna save for Katanas or Argus 1431.
I agree! I went with the Mh1s and plan on putting a C5 on later.
Now I can observe my hotpockets hit optimal temperature in my mother's basement.
*in the dark*
How do holographic sights with “night vision” settings perform in your experience with the jerry FB on right eye dominant shooting as you were mentioning about red dots at 19:10
i dont need it, i dont need it...i...i...I NEEEED IT! no but seriously damn. that is one mighty fine piece of equipment.
Cool but not $18k cool.
You missed the first paragraph of the video. Congrats.
No it is that cool. Will I buy it right now? Hell no, I need to become a better shot first. But it's something to keep an eye on
Hiding from NVTI gear is cheaper than running it. Ideally, you wanna do both.
18k easy money
18K can get you a quad setup with a handheld RH25 thermal monocular
Starting new job this week, will be starting new savings pile to pick these up. Likely will get there in a little less than a year if I'm aggressive with it. Never could get my breach to collimate due to mount and setup preferences.
Does the unit project the thermal image just on the right tube?
Do these only come in green? Is WP an option? How’s the FOM, clarity and battery life? Are they water resistant to a certain depth for a period of time and what temperatures do they work in?
I’ve been running the L3HARRIS GPNVG for a couple years. They’re slick, but adding a thermal element to your nods is next level. I tried to combine a thermal tube with a pvs-14 and it was turning into a nightmare trying to find two that would bridge properly with an adequate battery pack.
For years I always thought having a NV setup was unobtainable for me. Now that I’ve had one a couple years I really want thermal but I know I’ll never be able to afford a nice thermal or overlay setup. Maybe one day I’ll get a handheld unit to keep in a pouch and have a lanyard for if I wanna wear it around my neck. Would love to have it helmet mounted but everything like that is crazy expensive
Honestly having a little thermal monocular in your pocket for a quick scan here and there is probably the better set up for most people anyway. All you need the thermal for is it show you where to look with your NV. A mid tier thermal will do that really well for you. If you got the nice nods with very good identification range, all you need is a mid thermal cause even mid to low tier thermals have high detection range but poor identification range. NV is basically the opposite, good identification with poor detection. A sub $1000 thermal monocular will get your detection range up into the several hundreds of yards. The bust out a rifle scope to look through with your NV or something to ID from there. Even one of the 300-400 thermals will bump your detection range up significantly if you just use it for periodically scanning for detection only, then leaning heavily on your NV to do the rest. It’s by no means ideal or the best, but for the cost it’s hard to argue with. A 400 dollar thermal paired with a pvs14 used in this manner is a major boost in capabilities over someone who only has NV. And for less than the cost of a Wilcox mount lol. As a stand alone device they’re fairly poor quality and not very useful, but paired with a highly capable device like gen 3 nods, it’s a big boost in capability.
You can get Jerry 31's and their C5 clip on thermal imager for $8,000 together. That doesn't account for a helmet, mount, or IR device. But most people can save over a year or so and be able to afford some form of night vision.
@@yakivpopavich or the C2 + j31 for 5k
I think I'd want the thermal on the left eye! Is it switchable? I'd assume not.
Thus allowing the right eye on an actual thermal riflescope, , , anyway,,,
What’s the detection range on them?
Gonna start saving next month, should have it four months after that.
International export is also a big selling point.
Could you say a few words about it's navigation features?
I love the video. Great job!
Can the lenses on these be changed out for PVS 14,15, or 31 lenses? The lenses on these are awfully small and I've seen a lot of chromatic aberration in their other products.
Do you have. Video in the PD Pro (the NVGs) you mentioned are your favorite)? Are you talking about the Quads?
Yup! Search up "Binocular Night Vision | Photonis PD Pro Binos" on TA Targets RUclips and you will find it 👊
So we are seeing something different in each eye? Wouldn’t it be better to just get the ENVG-B?
Wow Sam Fisher’s goggles are real now!
the thing i dont like, is having a gps locator on it or bluetooth, if that stuff could be removed porb would interest me more. i just want nv + thermal no need to have a skynet locator onboard too.
You can run the CE5 battery pack which does not have GPS. We agree.
@@KeystoneCarry so its the battery that has the gps nav stuff and bluetooth in it? not the nvg itself?
@@zr6671 I am not sure of the Bluetooth aspect, however the battery pack on the JFB has the GPS markings and function on the battery housing. The CE5 pack is just batteries.
Bluetooth is less concerning than GPS obviously due to distance limitations. I’ll be playing more with all of this as I keep using this unit. 👊
@@KeystoneCarry awesome look forward to seeing more about this imma DEF keep this on my radar.
Do a video on the j-31 unit please
Where do i just find a 1x for my pocket or home? I have several thermals for weapons. Need around the house and running around where wide angle up close is would be great.
Something I’m curious about but I didn’t notice if you mentioned it…. Is the thermal display in both tubes or just on one side?
I‘m left eye dominant so my only option is a thermal clip on. Why do all fused nvgs have the thermal on the right eye wtf
Can't you get rid of the need for lead weights, by placing the batterypack further back, for better leverage?
Yes, but then you'll add physical bulk to your helmet. I think the better solution is to make the housing out of plastic to save weight.
OMG I can become Batman. Idc how long it takes will get one from you guys one day
The mandatory included gps and wifi adapter made me say no unfortunately, ecoti at least doesn’t have external connectivity as far as I can tell. Was so damn excited, the l3 Harris ones are l.e. only still all this time later, I’m pretty sure they’re connective as well unfortunately
hypothetical "doomsday" are you going iraymh25 with pvs 14 or dnvg?
We would choose to have some sort of thermal for most scenarios. If driving, the binos are nice. You could consider something like the Infiray outdoors CBL19 as a handheld without spending a ton. We stock those for that reason.
@@Arkayne oh wow, I just watched some videos on one. That is great option. Thanks for the product reference
From watching your side-by-comparison view through the two setups, in my subjective opinion I would tend to prefer the Vyper + Jerry CE5 over the Jerry FB, as the view through the former appears better integrated and more seamless than the latter. The white hot of the Jerry FB's integrated thermal image is poorly paired and a mismatch with the green phosphor of its NV image intensifier tubes. Just doesn't look right, not well fused. A much better match and seamless integration and fusion is the Jerry CE5's white hot with the Vyper's white phosphor NV image intensifier tubes.
Additionally, again in my subjective opinion, I find annoying and a needless distraction all that digital clutter of symbols and figures on the Jerry FB's screen. Hopefully all that clutter can be removed through a configuration setup option to give a simple, clean image.
Would love to see some images/video of the view through the Jerry FB once you figure out how to install white phosphor NV I2 tubes in it, and remove all that digital clutter from the screen.
Go check out one of our latest videos called "Thermal Caught Escaped Killer Danelo Cavalcante" We show the Jerry FB with Elbit white phosphorous tubes in that video! After you watch that video please let us know your thoughts. We think your opinion will change.
Excellent. Well integrated, good fusion and clarity. Impressive.
For that amount of money go fucking in depth I mean down a rabbit hole. I want hours of content and PhD level dissertation on this system!!!¡!!!
Needs to have the option of thermal on left eye. A bridged setup wins for now, especially in price.
What is a bridged set up?
I hope you guys see this but I’m getting ready to buy my first pair of night vision and I have the money to rather get a pair of 1431 BMVDs in green, or I could get these, these 2+ and the other ones are GEN three so I’m just curious if there’s any big difference or if the juries would just be better because they’ll be a little bit less they’ll be about $400 less than the 1431s. I really need help from someone thats not gonna tell me yes because they want me to buy it or no because they want me to buy the other one. I want a straight answer from a company that works with night vision, or anyone else that isn’t looking for me to buy their set. unless you got a used set in good condition hehe;)
Hey great question! Shoot us an email at cs@arkayne.com so we can have a more in-depth conversation 👊
@@Arkayne okay i appreciate it! i will be contacting you, it kind of screwed up that wording, so I’ll fix it up!
It's cool and 18,000 dollars cool!!! haha. Do a giveaway. I'm currently battling cancer (rare leukemia) and these will save my life. Okay, they won't save me, the targeted chemo will and likely these are known to the state of California to cause cancer hahahahahah. What a cool ass video you guys made. Thermal is incredible from ABOVE. I served in the 90's at Hurlburt on the gunships. You can run but you'll just die tired.
can you turn off thermal for situations when you need night vision for driving?
Yes, and you can also turn off the NV if you ever just wanted thermal.
You actually don't need to turn the thermal off. It's not like when looking through a thermal only unit, where looking at glass is just blacked out. I was surprised when I looked through windows; the nvg image sort of just keeps working so it's like you're looking through nvgs as per normal and the thermal doesn't "block out" anything.
If you have 10160 tubes does it accept those and the knob wont do anything with gain?
Finally, the Sam Fisher is attainable
Yes you can have superpowers, my friend.
Can we please call it the f j b?
It just has a better ring to it.
We do behind the scenes often
I hope they sell just the housing and we can bring our own intensifier tubes!
We are already able to supply just the housing. If you need one, email us. Or we can build it up for you however you’d like. 👊👊
@@Arkayne who much are just the housing? I’m assuming it takes unique optics and not pvs 14 pieces?
Core Vision Industries was, might still be, releasing a unit just like this. I say maybe because their site is gone and Facebook page has been dark since last year. Really cool looking design. Shame if it’s dead.
I tried checking their website where they had pre-orders going. dead link.....
@lamppost904 yep and no response on Facebook. They killed their instagram a while ago due to censorship so that's a no go. He moved from LA to Tennessee a year or two ago and after that sort of dropped of the radar with minimal updates.
Damn so what happened to the pre order thing?refunded or just ran with it,?
@lamppost904 no clue haven't seen any updates. No idea how many pre-ordered
Hypothetically, how concerning would it be to have this device with the Chinese software in it should we find ourselves in a conflict with the other side of the world?
The worries of a Chinese killswitch are not entirety unreasonable, but consider that the US has passed legislation to have killswitches in all of our cars. There is no promise that anything ever will be 100% clean unless you designed and fabricated it yourself.
Hell yeah
What's fov for nvg?
Wouldnt 50hz makes you dizzy? VR headsets have 60hz.
Anyone have experience with the PARD FT 34?
What bag is that?
Vertx Transit Sling 👊
"If you got your RUclips revenue check, you can afford it" :rolleyes:
Super cool unit. I currently have set of l3 dtnvs with a Jerry c but have always been interested in this unit and one I wish I could see in person.
Do you think there is any large benefit other then price difference between the Jerry C and this? And which do y’all prefer to run with all things considered?
Also do any chance they make this unit in a quad tube style housing in the future. Seems like wider FOV is all the rage these days.
Yes, this surpasses the C in almost all respects simply due to the clarity of the unit. The CE5 video drops in two weeks and we do more comparisons. This is like having an RH25 fused to your binos, which is insane.
That doesn’t mean the C or CE5 are bad, just that they don’t have the capabilities of this bino in terms of thermal clarity and detection or seamless experience.
Is it plausible for this type of device / combo unit to dip down to 8-10k in price in 5 - 10 years?
How does this compare to having the ECOTI + NVGs?
We compare it to the CE5 at the end of the video which would be very similar to a COTI. We aren’t fans of COTI.
You can get them for $10k now
Yes… my uses are for “Predator” hunting😏
Get ‘em 😈
When instead of having ad’s on a video. You get an entire video that’s an ad lol
Whatever makes you feel better. It’s called a product review, not an ad.
@@Arkayne oh come on that was a good joke lol
I don't know if you can answer this:
I can NOT look through binoculars, my right eye shuts down for me to see (left eye dominant, right handed). What do you recommend if I'm trying to get into NVG? I like the idea of NV on my right eye and thermal on my left, when I shoot a rifle I use my right eye, pistol is all left eye
If you get a thermal and tube you can hold them by hand and see which eye likes what. If there's anyone that does NV classes nearby maybe they can let you demo theirs. But straight up thermal bridging with a dedicated thermal scope + 1 tube is hard, the images won't line up perfectly because they're built different. I think the ideal is binos + some kind of COTI.
You can run a PVS14 on either eye and there is no right or wrong. With binos, you'd need to train yourself through it. It certainly IS possible, many people have done it. It will just take hours and reps. There is a benefit when in total darkness as your eyes ONLY have the optics to look through. I find that makes it easier than standard daylight binos.
Even with a bridged setup, you can keep the 14 on your dominant eye for shooting, a thermal on non-dominant for scanning. Whatever works for you is right for your situation. Hope that helps!
Sam Fisher aaahh device(the only one close enough)
It would’ve been more catchy to name it. FJB.😂 let’s go Brandon.
😁
*Wow, look, a comment with the name sam fisher in it!*
Lack of recording shows its right for combat.
New job can bank-roll these... what the wife doesn't know...
My brother (a dirty ass civilian) runs a similar setup. Got about 10k riding on his head
Yeah once you get into binos or a 14 and thermal, you’re in the $10K range often
@@Arkayne when I wrote that I didn't realize the system you had was an overlay, or that there was even overlays like that out there.
They’re nice, but saying they’re a “ENVGB killer” is very goofy
Why’s that?
You really think a Chinese housing is equivalent spec, build and electronic wise to a ENVGB? The ENVGB has probably hundreds of millions sunk into its IP and research with decade plus of development from the PSQ36, PSQ20 and other systems. They’re comparable in relation of what they both do but obviously the ENVGB is far superior to this. Like hell the glass quality on this unit requires your eye to be a half inch or less to fully get the sight of the tube and thermal overlay.
Power hungry unit.
Only when using thermal. Thermal definitely sucks batteries down
Did your cigarette burn you finger eventually?
For the thermal it does not show true heat gradients between the hot and cold, it looks like a negative that has slightly enhanced contrast... This is not a real Thermal...
Thumbs down for the Barry clip😢
First!
Ayyyy
This they left all that Gear In Afghanistan New surplus inventory . Coming soon
I’ve seen thermal on drones that is 1,000% better!!!
Talks like we all have 18k laying around… still a nice toy
Have you ever made a video that is something you don’t sell being the best thing smoking? That Chinese crap is not to par. I have all that crap, 31a’s with the Jerry c, quads, Jerry Fb, Rico 25, all the crap. All are good for different things. I sure wouldn’t trust my life to the FB though. Especially in a CQB situation
Weight can be delt with. The price...not so much. Maybe when I'm Scrooge McDuck...
Understandable. Most customers rocking thermal rigs with a PVS14 are already into their setup 10-12K. The extra $3K will absolutely be worth it for some folks. Thanks for watching!
@Arkayne Realy good to know the tech is getting better for everyone. My unit tested the first issued NOD/Thernal hybrid units back in Afghanistan 2011. Very good fusion mode.
This might just be the most prized loot in tarkov Ukraine
I’m too poor to even watch this entire video
Watch it, learn about the tech, and start a plan to save money. This video isn’t about selling a $15K unit, it’s about educating people as to where the tech is headed.
The poors need not apply
mount it on a drone lelz
Not worth the money for 99% of people.
So this is not a thermal binocular... Misleading
Holy, this is amazing and especially at that price point considering the L3 version is only MIL and they are for 50k per pop. Most of these ReTaRdS in the comment section don’t know what they are talking about and take Lucas a gospel without a doubt of any info that’s truly sorted by themselves, that coming from a Lucas Big proponent of his Normalization of what the 2nd really is about. Anyways moving from that tangent, good job on these I’ll be picking a pair soon to test it out
Let us know when you get to that point and we’ll get a set built up for you with whatever tubes you want. 👊
@@Arkayne 🙏
This is what Lucas means when he says the NV market is gay. 18k? 🤣🤣🤣
Imagine having to use Lucas to form your opinions for you. Congrats.
@@Arkayne L +ratio, cope + seethe
TF does that even mean goober? 🤣
I think that is tween-speak.
@@Arkayneit means Lucas was in his ass trying to pray the bay away while he typed that reply