✨How To Reset Forgotten Password In Windows 11, 10 \ 8.1 Without Losing Data\Without programs
HTML-код
- Опубликовано: 29 сен 2024
- ✅Hey!
➡️ Can't remember your Windows password? Don't worry, EaseUS Key Finder can help! -bit.ly/3Y1Owi3
Today we are going to take a look at a rather simple way to reset forgotten local account password in Windows 11, Windows 10 and Windows 8.1 without programs.
This is actually a big problem when you cannot open your computer.
You are trying to remember your password, but it doesn't work. You can reset your password and come up with a new one, but you haven't created a dedicated password reset flash drive.
Do not worry, look carefully, repeat exactly after me, step by step, and we will succeed!
⏱️Time codes
Overview of how to reset a forgotten password in Windows 11, 10, and 8.1 without losing data.
00:31 🛠️ Introduction to four methods for opening a command prompt to begin the password reset process.
00:45 🌀 Method 1: Restarting the computer with Shift key and navigating to the command prompt via troubleshooting options.
01:37 🔁 Method 2: Forcing a system recovery by interrupting Windows startup multiple times to access command prompt.
02:44 📀 Method 3: Using a Windows installation USB to boot and navigate to command prompt.
03:57 ✨ Method 4: Booting from a Windows USB and using Shift + F10 to directly open command prompt.
04:29 💾 Determining the drive letter where Windows is installed using Notepad through command prompt.
05:16 🖋️ Instructions for using command lines to reset the Windows password by manipulating system files.
07:38 🔄 Completing the password reset process and restarting the computer to apply changes.
08:03 🔓 Command line instructions for removing the account password entirely, allowing access without a password.
09:21 🔑 How to set a new password post-reset for enhanced security through Windows settings.
10:16 🛡️ Final step detailing the process to secure the computer with a new password setup.
Made with HARPA AI
✅1.Command Prompt
05:25 team number 1:
move е:\windows\system32\utilman.exe
е:\windows\system32\utilman2.exe
06:30 team number 2:
copy e:\windows\system32\cmd.exe
e:\windows\system32\utilman.exe
✅2.Command Prompt:
08:05 remove password:
net user
net user ipMalik *
I hope that what I just said in this video could help you, and if you found it helpful, please share my video with anyone!
Write me a comment, I will answer all your questions and try to help you.
Thank you very much for your attention to my video!
Good luck!
👉1. This is the way to reset the password for the local account.
2. In the process, all data remains in place, only the password is deleted.
It is 2nd method for me. However my username us not shown.
As per the video you have a administrator name and default account.
The default name in your video showed up as administrator account for ne
@@ranjeethkumar9781 You may have a Microsoft account on your PC.
Do you know what account you have on the PC,
local or Microsoft?
It is important.
@@ipMalik what if its microsoft account?
@@eliasodede6726 The fact is that the password from the Microsoft account is stored on the Microsoft website and is constantly synchronized with the PC, and therefore it is impossible to reset such a password on the PC, only using special programs.
Try to do the following:
Sign in to your Microsoft account from any other PC or phone:
account.microsoft.com/account?lang=en-by
When logging in, click "Forgot Password" or "Login Options" and then follow the prompts.
After successfully changing the password, turn on the locked PC and enter a new password.
The PC must be connected to the Internet.
If it does not work, write to me, there are options and I will try to help you.
For people with backslash issue or getting # instead of \ , use the alt key on the RIGHT of ur space bar together with \ . (Alt +\)
Problem solved.
Thanks to OP this is basically the most dangerous thing I've learned in order to fix windows. Lol
No pc is save, not even my own.
Used no.3 worked so easy thanks so much. Needing a Win10 bootable drive sucks a bit, but definitely worth it. Thanks a lot😁
Thank you so much for the video, Password reset with ease after days of cracking 😅😊
Ok😊😊❤❤
Thank u brother😊
Ok🙂
Thanks a lot. Professional tutorial
Ок 🙂
everything worked just perfect..thank you Maestro:)🙏👍
Ok😊😊❤❤
❤loved this step-by-step. It was a lifesaver!
😊😊💕💕
Tried the USB bootable method , was able to reset the password . I really appreciate it. Thank u very much. You saved my life ❤
I can't find the utilman file any where on my Acer Aspire One. Windows starter 7 in system 32. Searched all drives. The CMD file is there though. really hope someone can help me tried so many videos already but to no avail ... 😢😢 Pretty please would be eternally grateful 🙏❤️🙏
man, you are absolutely my savior tonight. I was desperate and thanks to you I solved it easily. subscribed to the channel immediately❤❤❤
Ок🙂
I have windows 10 and when the system reboot 7:56 I can't find the button to open cmd
Omfg thank you so much... was trying to get inside old pc last few days not possible... after watching your whole video and just before I start "cracking my password" I remember password... it was my X Birthday ffs
OMG YOURE A LIFE SAVER I THOUGHT IT DIDNT WORK THE FIRST TIME BUT I MUST HAVE TYPED COMMAND PROMPTS IN WRONG I CANT THANK YOU ENOUGH!!!
groups whereas a SQL allows them for Absence of security reported by choosing a department select count
Thank u so much
I'm from Philippines
It's 2023 but still works!!
Great job...
More helpful tips pls
Of all the videos this was the one that got the job done. Thanks a ton for your help I deeply appreciate the amount of time wasted and headaches you prevented.
Well, I'm glad I could help you 🙂
I agree 100%. no other video helped. This one did.
Bruhh, after 1 hour and 30 minutes, I finally fixed it, thanks!
cmd missing how to recover after this process?@@Hustlery
Thank you so much it worked for me! Im so glad you share your knowledge. Share more videos so others can benefit from your expertise. Again im so happy I saw your video. Life saver! I still got all my files and open my computer. Bravo!❤❤❤
Ok!
LIFE SAVER OMG WORKED!!!!!!!
Ок 🙂
Awesome tutorial, and professionally done. The only issue I see, and its more of a nitpick, here is with the final solution you never shore up the security vulnerability created by renaming cmd to utilman. You should should really show how to access sytem32 from windows user and change it back to the proper application or mention they need to preform the steps from the boot media in reverse order to shore up the security issue.
Thanks for the positive feedback!
is there a video that will show us how to do that?
@@creep1000 I'm not sure if it's necessary to do anything else after this process, the only thing is that after removing the password and gaining access to Windows, the computer remains defenseless, and to get rid of this problem, at the end of the video I show how to create a new password to protect your data .
@@ipMalik none of the 4 ways worked for me. Can you please help i forgot both my password, and pin and i can not restart my computer because all of my important stuff are there.
@@marjan1222 It's strange .. couldn't the bootable Windows USB flash drive help?
Didn't work. I'm still back at being asked for a password. This is the 3rd YT tutorial it hasn't worked, & I've gone through all (incl. this one) twice.
Yes bro same
Yes brother same
Mine too. I can't get the final command prompt. I'm using Windows 10
Same
Same here
Thank you so much for the information,,, I followed step by step for my laptop lock for how many years🤣🤣🤣👍 thank you
Well, I'm glad I could help you 🙂
NET USER
[username [password] [options]] [/DOMAIN]
username (password /ADD [options] [/DOMAIN]
username [/DELETE] /DOMAIN
username [/TIMES: (times | ALL)] username [/ACTIVE: (YES NO
C:\Windows\System32> what next when the PC display those commands
Thanks a lot dude, you literally saved my day. I'll be really thankful to you for the rest of my life.
Ок 🙂
You produced an excellent tutorial - thank you!
Ок 🙂
zapper date with Scalar xcix charger
select distinct from department where
Getting ready to attempt this, but a Question, please: When you're all 'done', do you have to go back and change Utilman and CMD back to their original names? LMK and thanks for a great, detailed video!
Same question
How to rename back?? Bcoz cmd lost when I am trying to open
first way never works on my release! - Windows rebboots and asks for user and password for command-prompt
Your HINT ist OVER!!!!
In the last step it says somthing about online and I can do the wifi because it is disablead and I cant login into my pc, and when I test another username and did it it says later "you need to write a pin code" Answer as fast as you can, Thanks
Is there another command o r somthing, this is important
Bro if I had a 100 dollar right now I would have dropped it to you, I feel like liking this video 1 millions times, thanks so much, we need people like you in the world
Thanks for the positive feedback🙂
Love y bro u solved my problem with all methods in one video ❤
@@ASAD-lw1xk Ok🙂❤
after so many video I tried.....finally this video works and I can reset my password without losing any data with my Lenovo IdeaPad 5..... hope others guys can get the same thing with me.... thank you very much ipMalik....appreciated and pls continue to share your knowledge and helping others
This is perfect. After I deleted my password, I remembered it 😂. However, thank you very much
Files was deleted or no
after a day of failed get-arounds, I found your video. Success on the first attempt. You are Premium, Sir
Ok!
Thank you 2024 still working thanks alot.
After 1hour of try to crack my password, I just remembered which is my birthday date 😂🤦
Did you end up resetting your password?
@@ipMalik yes 😂
@@nandhakumar7261 Ок 🙂
Shit! Same thing happened to me. I'm so happy I want to cry 😭
It work. Thank you ❤
Thank you for all of us that have password Dementia. Great info.
Ок 🙂
Omg I can't tell you how thankful I am for this video!! I have finally logged into my laptop after 1.5 months. You have saved me money, time and so much worry. Thank you so so much.
Well, I'm glad I could help you 🙂
Really ?
I haven't been able to get into my pc account for 1.3 YEARS and that I AM A COMPUTER STUDENT
@@ipMalikHow u can open command prompt,,,becuase it is already locked ,,then how to open cmd,,,please help me asap plzzz
variants Test it evaluates to Telemetry Agent periodically collects usage
unique construct evaluates to Database administrators have permission from instructor relation
Thanks a lot dude ❤🎉
Time wasted successfuly🤕
You guys know there is a code you type on to any device that actually force your device to create a new password. Without have to enter your previous passcode. Thank me later
Thanks a lot man.This is such a life saver video!
24hrs of trying I finally got it done. Thank you❤❤
How
I love you, you just saved me weeks of extra work
Well, I'm glad I could help you 🙂
1,2: requested password
3,4: denied USB because BIOS doesn't support it
Guess i'm fucked
Get to boot repair, stay offline, let it do it's thing, when it asks to reset, cancel, wait, error pops up saying it can't repair, open the window, scroll down click the file it lists, it opens a notepad, hit open on note pad wander into c drive/windows/system32 rename sethc to something else, copy cmd, rename the copy sethc smack enter and restart, hit shift 5 times cmd opens type in net user (insert name here) *. Hit enter twice and log in.
The best brakedown, thanks for sharing 👍 ❤
Ok 🙂
While typing in the command, after pressing enter, below the command comes wording "the system cannot find the path specified"..how can i be helped, i wish i wud share images
I'm having the same problem rn. Please help me!!😭
Didn't try yet, but I think this might be the best and the most comprehensive video regarding forgotten/reset password.
That's Freaking crazy It actually worked you are the s***
Hi! May I know if this process of password reset may cause the deleting my files on my laptop?
As a result of this process, all data remains in place, only the password is deleted.
Thank you sooooo much! Had a two part account name so the "User Name" worked for me 😁
Ок
Mate it helped alot! Here at 1 am just solved it thanks mate! ❤️
Ок ❤
Thank you very much. I couldn’t remember the password for good 5 months. You saved me from agony.
Well, I'm glad I could help you 🙂
What about data?
@@-V-yl4jg As a result of this process, all data remains in place, only the password is deleted.
For this internet access is required?
this helped me su much thank yoouuuu
Why is it X: \ windows\system32> for me and not X: /Sources>
Life saver. Thank you ❤
Ok🙂
Bro saved my laptop, I've seen more than 6 videos and nobody ever mentioned the shift+restart combo. Thank you very much🙏
Ок 🙂
@@slayingposiitively If you find it difficult to enter commands in cmd, try another method.
It's simpler, but also works great:
ruclips.net/video/t_rLiW6x7fo/видео.html
@@ipMalikcommand promp does not open..????
Very helpful for me, thank you so much 😊
🎯 Key Takeaways for quick navigation:
00:04 🚀 *Overview of how to reset a forgotten password in Windows 11, 10, and 8.1 without losing data.*
00:31 🛠️ *Introduction to four methods for opening a command prompt to begin the password reset process.*
00:45 🌀 *Method 1: Restarting the computer with Shift key and navigating to the command prompt via troubleshooting options.*
01:37 🔁 *Method 2: Forcing a system recovery by interrupting Windows startup multiple times to access command prompt.*
02:44 📀 *Method 3: Using a Windows installation USB to boot and navigate to command prompt.*
03:57 ✨ *Method 4: Booting from a Windows USB and using Shift + F10 to directly open command prompt.*
04:29 💾 *Determining the drive letter where Windows is installed using Notepad through command prompt.*
05:16 🖋️ *Instructions for using command lines to reset the Windows password by manipulating system files.*
07:38 🔄 *Completing the password reset process and restarting the computer to apply changes.*
08:03 🔓 *Command line instructions for removing the account password entirely, allowing access without a password.*
09:21 🔑 *How to set a new password post-reset for enhanced security through Windows settings.*
10:16 🛡️ *Final step detailing the process to secure the computer with a new password setup.*
Made with HARPA AI
Thank you very very much😊❤💥💕💕💕
I recently changed my SSD from my old computer to new one and i cant see my user name there…
OMG YOU ARE LITERALLY A LIFESAVER! MY BROTHER FORGOT HIS PASSWORD BUT BECAUSE OF YOU, HE COULD ACCESS HIS LAPTOP AGAIN!
Tysm!
Well, I'm glad I could help you 🙂
On my laptop it says PIN code and not password its Windows 10 so does the same methods apply?
Thank you so much..and for slash issue use alt slash symbol instead ....thank you once more...
Thanks a lot! I was able to access a 7 year laptop with forgotten password with method number 3 🎉❤
Well, I'm glad I could help you 🙂
wow, what an absolute G!!! I was having a hard time because of all my school stuff. Now I was able to log-in successfully, THANK YOU!! 👍🏽👍🏽
Ок 🙂
You are a life saver. The method 1 works for me. Thank you so much, Cheers mate!
Can you explain me more please
THANK YOU SO MUCH! YOU ARE A LIFE SAVER!
I've scoured the RUclips for weeks now till I came across your video.
Followed it step by step and I WAS MIND BLOWN WHEN IT WORKED!
THANK YOU MAN! YOU SAVED MY THOUSANDS OF FAMILY PICTURES!
THANK YOU 😭
And I'm happy for you too 🙂
The installation menu doesn't open in mine😢
Please help me brother 🥺
It opens lock screen after clicking on USB
Edit: My PC is unlocked without losing data thank u so much 😊🫂
In my PC it shows following things:
UEFI Boot Sources
Legacy Boot Sources
Hard Drive
USB
SATA4
Network Controller (IBA GE Slot 00c8 v1381)
👆🏻👆🏻👆🏻👆🏻👆🏻👆🏻
These things which one I should choose
@@saad.ak1322 It's a pity, but there is no single standard for all BIOSes, if you do this on a laptop, write the following in the browser search:
"How to open the boot menu in (your laptop model name)"
If you are doing this on a desktop computer, write the same and include the motherboard name.
This should help you.
@@ipMalik how I get mother board name
@@saad.ak1322 You need to remove the cover of the system unit and you can see the markings:
paste.pics/LN65D
If there is no such inscription, you can find any inscription on the board and find its full name in Google.
@@ipMalik My father is so worried about PC data. Are you sure this method will doesn't delete anything? anything...
He is waiting for your answer
Worked Flawless on my friends computer. Used a windows 8.1 install disk and used quotes on the two name user name. Password was blanked with no issues. Great video that was organized and chronologically correct. Thank you! Thumbs UP! 👍
Laptop thieves: WRITE THAT DOWN WRITE THAT DOWN
😊😊
didn't work for me
Do u have other solution?
I still am asked for a password before the command promt opens? Any ideas?
Due to the latest updates from Microsoft, it became possible that in Windows 8.1 and Windows 10 the command prompt can only be opened using a bootable Windows USB flash drive, otherwise the system will require a password.
If you do not have such a flash drive, you can ask your relative or friend for it, or you can make such a flash drive yourself, but this requires another PC, making a flash drive will be free:
ruclips.net/video/SB-u10x5lFg/видео.html
troubleshoot Asking for password before opening
@@HEATHLEDGER-ir1he already told you, use a bootable Windows USB flash drive and the system will not ask for a password.
sir how can i contact you ?
Sir , please provide e-mail ID or Telegram I'd
The best and well explained video on the ducking Internet 🙏🙏🙏🙏🙏🙏🙏🙏 10:32 10:32
SHALOM BROTHER
HOW DO YOU GET AN FORGOTTEN EMAIL PASWOORD IN CMD
THANK YOU
😊😊😊. Thanks bro. I just successful logged in. Thank you
THANK YOU SO MUCH..
Watching from the Philippines😁
Worth it...❤❤❤
Ok 😊💕
I need help. When I wrote the copy command, I was asked this: "Overwrite c:\windows\system\utilman.exe? (Yes/No/All)
What should I do next? Thank you.
This is something unusual..
Better put this method aside and use another one, it also works fine and does not have so many cmd commands:
ruclips.net/video/sGn5ZBD__UM/видео.html
After this my cmd is not opening what should I do
If you went all the way in Registry Editor and didn't get cmd, restart your computer and go all the way from the beginning - it should work.
Thanks brother someone hacked my system and created new user with password n he changed password of my user also but thanks to you I was successful login my system and now using proper😊
Ok😊
I am in a trouble I forgot the password of my ho 15 laptop but I remember the pin but it's not showing pin option and that's the main problem can't even restore the data now because can't remember password not even opening the administrator
A few questions, please answer each question in order:
1. Do you have any personal files on your laptop that you don't want to lose?
2. Do you have a bootable USB flash drive for Windows 10 or 11?
3. Do you have another computer or laptop, or does a family member or friend have a computer that you can use?
Hey , last one enter and I got system error 8646 has occured , the system is not authoritive for the specified account , any solutions ?
You most likely have a Microsoft account on your computer, but this video shows my method for a local account.
Do you know if you have a local account or a Microsoft account?
If you have a Microsoft account, you need to do different steps to reset your password:
ruclips.net/video/8KrP1ZY8vOw/видео.html
After rebooting from cmd , I didn't see the icon to open cmd window again. I opened it again using bootable USB but that didn't show my account. What should I do. Please help. My very important exam is coming next week and I desperately need to login
Apparently this problem is related to the configuration of your Windows or an error was made in one of the commands.
Put this method aside and try another one, it is also shown in my video and works great:
ruclips.net/video/sGn5ZBD__UM/видео.html
Please let me know when you're finished.
Thank you so much. Your method helped. I am so grateful for this. Liked and subed ❤
😊
Jesus Christ this is sooooo helpful I can't believe I have this PC with me and this video was so helpful.
Thanks ipmalik
Well, I'm glad I could help you 🙂
Nice. Thank you. It worked. helpful
3 months later inhave the exact same problem again and this video saved my life again thank you so much
Btw this video has 10000 likes and 300 dislikes for those who cant see it
The problem here is that if in one of the commands you write at least one letter incorrectly, then the command will not work.
I think this is the main reason for dislikes.
Nice bro video saved me csusd new update have issue with pin
Thank You so much, this trick really helped me to reset my password where I remember only the PIN of my local account.
Ok!
Password at command prompt?
Forgot password in the first place
Hi,
I am getting an error saying: “The system is not authoritative for the specified account and therefore cannot complete the operation. Please retry the operation using the provider associated with this account. If this is an online provider please use the provider’s online site.”
Kindly help me out!!
Hello,
most likely your Windows is running a Microsoft account.
Do you know what account you have on the PC,
local or Microsoft?
It is important.
Thanks a lot for your information, it was very useful, because of it I could open my pc and remove the password 🙏🙏
Ok🙂
Dude I did everything but when I try to enter my PC it still tells me that the password is wrong
There may be two reasons for this:
1. This method is only for local account.
Perhaps your Windows is controlled by a Microsoft account.
Tell me - Do you know what account you have on your PC,
local or Microsoft?
It is important.
2. You made a mistake in one of the teams, and now you have to go all the way from the very beginning
@@ipMalik how can I tell if my account is local or microsoft
@@لحتلتحةحخاىحاىحاة Usually we see a username on the lock screen, and if this name is only two words, no more and no less, then it is a Microsoft account.
A local account can also have a name of two words or even more, but this is rare, usually a local account has a name of one word; a Microsoft account cannot have a user name of one word.
Method 4 worked for me , but after I run wpeutil reboot , the laptop reboots , I can hear the windows sound but the screen remains black. Is there a way to revert ? Or what can I do next ? I can boot from the flash drive and get back in cmd via method 4
The system is not broken, sorry, but this problem occurs if you make a mistake in one of the steps or due to a certain Windows configuration.
If the problem is not solved, now try the following - You need to start all the way from the very beginning, that is, force a restart of the PC, if you have a laptop, press the power button and hold it until the laptop turns off, wait 1 minute and turn on the computer again.
Sometimes after this the problem disappears, but if the problem persists, force restart the PC again and then open the command line again using method 4, write “regedit” and go through the path step by step, but with one change:
open the CmdLine tab 4:50, delete cmd.exe, click ok and continue until 5:43
Restart your PC, after which the problem should stop and the lock screen will open where you need to enter the password to log into Windows
Don't do anything else and let me know when you're done.
Still works after a year. Thank you so much. You’ve just earned a Like and a Subscriber from me
Ok!
Method 1 and 2 both ask for password and only works for administrator account
Method 3 didnt work because command prompt didnt open when i pressed F9, i also tried other keys
In methods 3 and 4, it may help if you press three keys at the same time: Shift + Fn + F10 Perhaps due to the configuration of your Windows, this method will not be able to help you at all, then you can try to create a new local account and log into Windows with this account:
ruclips.net/video/WzoKeDngaqU/видео.html
I spent a year and my 😢wife told me why I forgot the day I got married and I got enlightened with the password of our anniversary 😢😅😅
It worked!!🎉 Finally I don't have to cry myself to sleep. Thank you very much
Ok😊
Thank you so much been trying to do this for 5 hrs now . God bless you ❤
Worked perfectly!!!! Thank you so much for this video.
Ok!
Thank you, thank you, and thank youuuu. God bless you abundantly in Jesus' name. 🎉🎉🎉🎉🎉
💕
rutaaaaam nuwuuuuussss, my PC is backk
This worked after watching and trying atleast 5 video tutorials. Thanks a lot for the video.
Ok!
Used method 1. You saved the day, cheers bro!❤
the MOVE command does not work "The system cannot find the file specified
It depends on the specific Windows configuration.
You can use another method, for example this one:
ruclips.net/video/QAWscu2_1IY/видео.html
It's not working for Windows 10 pH stream