Soviet Chain Mortiser [Restoration] (Part 1 of 2)
HTML-код
- Опубликовано: 30 сен 2024
- This tool restoration was on a Russian / USSR chain mortiser. I think it was made in 1973 by Electricgalvanic and has the model number IE-5601A. I do not know much else about this tool as most websites (which are in Russian) do not go into much detail. I believe the chain came in three different widths, and I have the 3/4" one. If you know more about this company or tool, please let us know in the comments.
The restoration itself was pretty straight forward as only a few pieces were missing. I decided to paint the tool as some of the photos of this tool online show it painted and the person I was restoring this for asked for it.
In this first part, I disassemble, clean, and paint the chain mortiser. In part two I reassemble, make new parts, and get it running. This thing is a beast!
I'd like to thank Evapo-Rust for sponsoring this video.
Help secure more tools for future videos (if you want):
/ handtoolrescue
Instagram:
/ handtoolrescue
Facebook Group - Share your restorations
/ handtoolrescue
Reddit - Share your restorations
/ handtoolrescue
![Soviet Chain Mortiser [Restoration] (Part 2 of 2)](http://i.ytimg.com/vi/7glF3Ge5ric/mqdefault.jpg)
![Soviet Chain Mortiser [Restoration] (Part 2 of 2)](/img/tr.png)
![Underwater Pneumatic Reciprocating Saw [Restoration]](http://i.ytimg.com/vi/t7In-zbH42I/mqdefault.jpg)
![Antique Sulfuric Acid Milk Fat Tester [Restoration]](http://i.ytimg.com/vi/RMo74gggN2k/mqdefault.jpg)
I like your videos so I thought I'd try to help a bit with this thing. It's a 3-phase 220V 50Hz instrument. The label says "Depth 160mm, 2800 RPM" (I suppose you guessed that). The code under the model index is the "special technical conditions" which is the technical standard for this particular tool. Interesting thing about this is that it's made for the voltage standard that doesn't exist anymore. USSR used to be either 1-phase 127V or 3-phase 220V, then it changed in the 50s-70s.
The tool was manufactured by the "Electrovypriamitel" (good luck pronouncing that :-D) plant (hence the EV abbreviation on the label). The plant's name is translated as "electric rectifier". The plant is located in the city of Saransk. It still works, btw, but no idea what they make. This model was produced from at least 1969 till early 1980s.
Hope it helps.
1:56 The knob is actually a grease reservoir. It lubricates the bearing at the end of the bar. By turning the knob you squeeze grease out of the tube into the bearing.
Товарищ, верной дорогой идёшь в будущее! Партия не забудет тебя и твой труд!
Представьте если он доберётся до реставрации бензопилы "Дружба")) Вот обматерится)
Svidu Prost пила дружба наше все! Надо ему намекнуть
Не не не! Мне нравится его контент и я не хочу терять адекватного ютубера)
Да, уж! Вроде бы не сложное устройство, но одной серией не обойдётся!..
Главное ему наш москвич не показывать
ему уже прислали "дружбу". можно в инстаграме посмотреть
This is the perfect Guy show. Tools, sped up for attention span, no drama, couple moments of humor and practically no talking.
Thank you!
I appreciate those parts of these videos too.
(PS - I am a woman)
I couldn't agree more, honestly
@@HandToolRescue hai? Broser! hai in Russia! you peace broser!
Hey! I enjoy these videos too!
Уже пол года просматриваю в сторону такого долбежника, а сейчас и инструкция по ремонту есть😃 Спасибо 👍👍👍привет с Кузбасса🐻
My father has one that his father gave to him that I will someday cherish. Cheers!
I think that adjustment knob you arnt sure of is an oil well. From the bar and chain.
Makes sense now.
Agreed, an oil pot/grease pot for the bar roller.
Yup thats putting oil down to the rolly fun bit
люди будут телепортироваться на другие планеты, жить в виртуальной реальности, загружать знания в мозг подобно компьютерным программам, - а эта хрень всё равно будет работать.
Не такая уж и хрень! Ей всего лишь 45!
... на росийских заводах, ведь со времён совка нихуя не производили
и при том что это делалось в латвии
Yeah what he said.
mrLumen2 так точно!
5:29, using an axe as a wirecutter.😀
Why use cutters when you have a Viking Battle ax handy?
Hey it worked.
axe is a national russian tool (as russians says). it works with rasputin face as at 15-40)
I've said it before, I'll say it again, HTR is an awesome channel showing how amazing results are not because of a billion dollar machine shop but because of very skilled hands. Eric also disassembles things like a normal human being. He doesn't act like hes performing miracles every time a screw is turned or a bolt removed. He beats and wrestles things apart 🤣
Could not agree more. So much 'warmth' throughout these videos whereas a few restorers have become anal in their pointless attention to the enth degree. I feel like saying yes mate, we know you're brilliant and have expensive machinery but please, don't forget to love the thing you're restoring.
I would be very surprised if you took this saw apart without a hammer)
With greetings from Russia
That's what I like about Russians, they embrace their own stereotypes and have a good laugh about it.
They have to embrace their stereotypes... The government requires it.
Well, well, well
Посмотрите внимательно, как автор обходится с устройствами сделанными в США!
надеюсь тут он не будет "играться деталями" и "пробовать нутеллу" под видом отработанной смазки
Dude... please tell me you're gonna say "previously on Hand Tool Rescue" on the next video...
Oh, 100%.
3:25 Dude, that screwdriver! If it had a hex socket type deal, that thing would be unstoppable!
Maybe I will remake those one day as well!
Hand Tool Rescue
That's what I'm talking about!
I will have one!
Is your Screwdriver an H.D. Smith & CO No 611 "Perfect Handle" Triple Lever Screwdriver. They were the original Makers in Connecticut of this style of Screwdriver. Here is a link from Progress is fine all about H.D.Smith and Co. progress-is-fine.blogspot.com/2012/12/the-perfect-handle-screwdriver.html and one from WK Fine Tools otools1.wkfinetools.com/mechanicT/HDSmithCo/tools/AdjustScrewDriv/AdjustScrewDriv-2-01.asp
The Second page has W.S Thomsons Patent application dated Aug 8th, 1911 with a great drawing of the Screwdriver.
I would think that if you were to bring back this line, tool rescuers would buy. I have seen you with other Perfect handles but the could be knockoffs or German made.
I know what I am going to be hunting for this summer...
Kolajer i try to google it...but you cant get it...its not available for sale..😑
In mother Russia we mortise with chainsaw
It's the most fun way to mortise.
In Austria we do too ;)
In Canada, we just say "sorry"
I think Mr Chekhov on USS Enterprise said that Russia inwented the Mortise.
With 3-phase grounded chainsaw made from STALINIUM
I really liked how you chopped a wire with an axe at 5:27. Probably you have some Soviet relatives :-D
Also if anyone cares, it is really amazing how geographically diverse this thing is: bearing at 10:19 is from 13-ГПЗ factory in Vinnitsa (Ukraine) and bearing at 14:25 is from 3-ГПЗ factory in Saratov (Russia). That's like 1300 km. or so...
Thanks for the information!
Ой, как приятно, что Вы взялись за раритетное изделие из СССР!
Не зря говорили: советское - значит лучшее!
Наши старые инструменты практически неубиваемые, сделаны с огромным запасом прочности.
Хотя, дизайн не всегда на высоте, это правда.
Зато работают, работают и работают!
И посмотрите, внутри изделия - чисто, ни пыли, ни масла.
С интересом жду продолжения!
Успехов!
Лайк!
l like the color you painted it,
Thanks! Wood.Work.LIFE. on RUclips chose that colour, as it will be his.
l have the drill in the attic , in the event l can ever find a carb kit, but if you find that you want it back sooner just let me know.
Nice work! But, i'm afraid, that our soviet industry didnt used any paint at all, becouse paint is a capitalist intrigues) (kidding). Glad to see something from Russia on your channel! Love it!
Could have painted it communist red lol
now it's a Makita lol
"Comrade, we don't have any three-pole switches!"
"Never mind, use two-pole, motor will stop!"
The wire wheel bit cracked me up. This tool is really interesting. I can't wait for part 2!
wait a minute, your comment was a day ago, but this upload just arrive on my subs 5 mins ago, how is it possible ?
Sorcery.
Now I know what I've been doing wrong :-)
the owem
One of the benefits of being a Patron. 😀
меня больше удивляет его необычайный набор инструмента, чем сам забойщик.
Из России с приветом! Подписан на канал уже с пол года. Спасибо за видео)
Спасибо за просмотр!
Поддерживаю, молодец! Мне понравилось как он провода топором рубил, это очень по Русски!
Украина тоже смотрит )
Смотрит, смотрит.
Тоже из России, смотрю канал с удовольствием и ставлю лайки ещё до просмотра!
0:48 We call this type of repair (with piece of wire) "country welding".
Amazing work so far brother. I'll keep those sandblasting techniques in mind for my future usage.
I don't like sand, it's course, and rough ,and irritating ,and it gets everywhere.
Эхх, синяя изолента, значит можно было и не разбирать!))
наверное он не знает про силу изоленты . Американцы обычно используют армированную ленту серого цвета
ник ники синяя изолентв лечит геморой что б ты знал
Да че они понимают, такую вещь запаганил)
Там покруче заклинание было: алюминиевая проволока! 0:14 Да и заводской шильдик закрасил, за такое, этому "реставратору" руки оторвать...
Он синей изолентой обмотал один из двух проводов, чтобы так отметить и потом при сборке не перепутать.
Love the color! What a great way to start the morning.
Cool!
2:50 DON'T TRY THIS AT HOME, HE'S A TRAINED NINJA
This vintage equipment so rugged I love it! And I love that you’re restoring them back to working order.
What I found about this thing, was the following:
The IE-5601A has an in-built squirrel-cage motor with cooling fan attached to the rotor shaft on one side and driving gear on the other. The gear moves the cutting chain which is pulled on the guide bar by the limit screw (the one, you're not sure about). The head with chain can be moved within directional columns that are installed on the base of the mortiser. If you press the lever the head goes down. It is lifted with springs automatically. This thing can mortise to maximum depth of 160 mm. The sizes of possible mortises are: 8х40х100; 12х60х160; 16х60х160; 20х60х160 mm. Overall sizes of the mortiser: 310х300х505 mm., the mass is 22 kg.
They also say, that you can find these brand new on flea markets for 3-4k rubles (roughly 48 - 65 USD).
Hope this might be useful and sorry for the possible translation errors.
Михаил Щербаков thanks for the information
да, еще их было несколько модификаций: www.shoptool.ru/article/2.html
И судя по вот этому объявлению: www.olx.ua/obyavlenie/dolbezhnyy-pazovalnyy-shiporeznyy-ie-5601-IDuc9Gg.html#802b7d00d3
как минимум моторы для этих станков производились вот тут (в 50е точно, судя по фотографиям из объявления) - www.vibrators.ru/
Думаю, что если обратиться в архив завода - можно найти более подробную информацию :)
In Soviet Russia, hand tool restores you.
Your videos are some of the best restorations i have seen,you really take the time to work with each part.nothing left behind, great work.
Is that pipe that runs the length of it some sort of tube that allows you to oil that bearing?
Possibly!
That was my thinking too, it's an oiler.
It is definitely oiler. I have something like that on my tractor. You unscrew the big cap and fill it with grease. While you screw it back it pushes grease trough the small tube to the chain guiding roller bearing.
I'm going to add my .02 and say the same thing, its got to be an oiler, I think that plastic cover unscrews.
I was scanning the comments to see if anyone else picked up on that.
Made in Japan: 1kg
Made in USA: 3,5 kg
Made in German: 6,5 kg
Made in Russia: 15,00 kg
🤣🤣🤣
не 15, а 22.
I had to check that - you can still buy a brand-new Makita chain mortiser and it weighs 18 kg! A German Mafell weighs less than half at 8.7 kg!
ты молодец и с чувством юмора )✌
1:56 : This is for lubricating the chain. Very important!!! Never run the machine without grease!!! In Germany the system is called "Staufferbuchse" ( de.wikipedia.org/wiki/Staufferb%C3%BCchse ). Don´t know the english word. Just remove the cap completely, then fill the cap with Grease (Staufferfett???). Then you can press the grease from time to time into the sword. Through the pipe, the grease will be pressed to the pulley on the end of the sword.
What a pity that you have no sense for the original surface of the machines. I never would repaint a machine with modern lacqueres. They are really not the same as the original ones. Most time the quality is much worse than the original ones. Doesn´t last long. Also there´s no reason to paint a machine like this one, that didn´t have any paint original. The paint will just cause problems in future. For anyone who has a bit of an eye for it, the new paints don't look good either.
American system is called "the oiler". Always supply adequate lubricant via the oiler. Add liberal amounts of oil with/through the oiler.
@@jcksnghst I've seen Stauffer cups in some of the videos on this channel. You unscrew the cap, pack it with grease and as you tighten it, grease is pushed into the bearing you want to lubricate.
Update: having watched the second part, this is definitely a plastic take on the Stauffer cup!
LOL, Stroganoff powered!
Now I know why my wire wheel hasn't been performing, I need to sharpen it!
You HACK!
"I'm not sure what this does" don't worry,neither do the Russians
Никогда такой штуки не видел. Интересная вещь!
Part 2 Soon Please
funny it says USSR on that bearing and not CCCP. well anything made before the collapse was better quality than after
Dosvedonya (sorry the only Russian I know if from Bond movies...) That is going to be one amazing tool. I still wonder why they made it three phase? Maybe Russian electric motors aren't that good? I was thinking to myself the whole time "American components, Russian components, all made in Taiwan.) Super excited about this!
Thinking about it now, it's essentially a brushless DC motor, which is basically a three-phase AC motor.
that three-phase asynchronous motor with squirrel-cage rotor
It is partially correct that three-phase motor was implemented there because of poor quality of single-phase motors. But maker of motor isn't as important, Russian or US or UK or whatever else, this item was built for industrial use so brushed AC motors and even 1-phase async motors are really worse because these motors have limited-life spares like brushes or capacitors. And there were no problems to have 3-phases current on the factory.
In USSR that really matters because of total deficit of consumables. I used to make brushes myself from the trolleybus' current collectors for some handtools with brushed motors and it was a real challenge.
So I fully understand the reason why this motor was put there. It was the only way to provide long life of the appliance.
Thanks so much, it is awesome to get actual answers on the internet. That totally makes sense in a factory setting. I would've imagined these being more field tools and having dedicated machines for factories that weren't as portable, but it would totally make sense to have on of these in a factory. I wonder what it would have been used for?
I suppose my English is just a bit better than your Russian )))
When I use words "factory" or "industrial" in concern of this tool I jusn mean "not for household". The use of this tool is obvious - to punch rectangle holes in the wood details, up to 160mm deep. You can watch this item running here: ruclips.net/video/-1urhumYVvE/видео.html
I'm an 82 to woman and I love your videos. Everything about them.
Thank you!
Sharpening the wire wheel with a file, what a savage!
I've often wondered how to do that. I learned something new today. I've also often wondered how many wires have flung off that wheel and are embedded in his shop coat
might be a stupid question but what's with the paint can at 17:45
Thank you for restoring this magnificent Soviet machine. The 3-phase power is symbolic: it refers to the three stages of economic development, whereby in the age of slavery, empire exploits barbarians; in the age of feudalism, aristocracy exploits the bourgeoisie; and in the age of capitalism, the bourgeoisie exploits the proletariat. Chisels are obviously bourgeoisie, and it stands to reason that dovetails are not only weak and effeminate, but fundamentally decadent, and therefore counterrevolutionary. Nails and screws are also the products of bourgeoisie exploitation, meaning that mortise and tenon joints -- which require no capitalist fasteners -- are politically correct, especially in Comrade Trudeau's Peoples Republic of Kanuckistan. Woe betide any galvanized stooge-of-a-nail that gets between the Mighty Soviet Mortiser and and its Five Year Plan for Slot Cutting and Filling. Cut slots and more slots, Comrades, the future beckons us onward and upwards, towards an everlasting Utopia (Siberian Style). The spring clips are also symbolic of the New Dawn that will occur when capitalism is finally overthrown so that the people can rise up and cut lots of slots in aromatic Siberian softwood. Even now, brave Antifa technicians are preparing thousands of liters of Goof Off for this most blessed and balsamic of days. The difficulty experienced in disassembling the unit is symbolic of the materialistic yet quasi-spiritual bond uniting all devout Soviet atheist carpenters. It should also be stated that the several apparent cracks and flaws in the Soviet castings were the result of external capitalistic stresses, and are in no way indicative of Soviet metallurgical or foundry expertise and practices (it is most appropriate that you repaired these capitalistic defects with a red-colored paste: LONG LIVE THE RED BANNER!). Now I know you can predict my only complaint, so here goes: WHY DID YOU PAINT A MAGNIFICENT SOVIET TOOL MAKITA-TEAL????? I'm going to reboot now, and dream of the miracles paint remover can perform...
Stereotypical Russian made. Big on toughness, infinitely repairable, low on tech. Or, as we used to say "Strong like ox, smart like streetcar".....lol......Was that part you were wondering about a tube to oil the nose sprocket bearing?
Oh yeah....I love the desoldering tool.
American technology of that time is also not particularly "technologically". At the same time in the Soviet line of woodworking machines were excellent options that will give odds to modern machines. Many Russians still have Soviet irons, stoves and other household appliances in their cabinets, which can help out in the event that the new fashion equipment does not work for more than a couple of months.
i think two that it is a greaser for the nose-wheel, turn and grease system...?
Is good, strong like bear!
Скажи это нашим танкам.
Михаил Бурмистров танки то тоже по такому же принципу, полудурок
Literally more care and attention paid to this than ANY Soviet-era Russian machine produced for any purpose previously. Congrats...
I live for your videos
I can’t believe you’re from Saskatchewan Canada because I’m from British Columbia Canada you’re my favourite RUclips channel can’t believe the things you restore and it is a part of history
That wire cutter works well, too.
Плотницкий инструмент, "долбежник", замена долота. Пытались применить для столярки, например, для врезки импоста в оконную коробку, но не пошло. Древесину сильно рвало на выходе цепи, а если попадал сучек, то брусок сразу уходил в брак. Скорость резания мала, а стружка толстовата даже на малых подачах при осторожном врезании. В столярке рулили сверлильные долбежники. В бревне же делать прямоугольный паз самое то. Но цепи были в дефиците, практически невозможно достать новую, а в колхозной мастерской и с заточкой цепи были большие проблемы.
Лайк если слушал советский гимн стоя
Спасибо) такой в первый раз вижу агрегат )
I think the tool is single phase 220 - 240V - if it was 3 phase, the third leg would also have been switched...
it`s actually 3-phase and 220V.
After looking at your video again, the ID plate certainly indicates that it is a 3 phase unit. I also found that it is not uncommon to find only 2 legs of three phase power being switched as the third leg is required to spin the motor. Having said this, it may be unsafe to do so depending on how well the motor winding is insulated from the frame. I do not believe the US NEC would allow this, but it is a Russian tool and they may well have approved of this practice. I would be careful to insure that the tool is not used in wet conditions or left plugged in when not in use.
@ 1:57 A Chain bearing lubricator;...
Keeping the lower chain bearing greased...
The Soviets made some pretty rugged gear.
Scott McLennan that casting mold was worn out AF tho
Scott McLennan almost all was 1:1 copy from Germany or USA made. Sad, but true
It seems to me that Soviet equipment and machinery tended to be ugly and clunky, the technology really old and obsolete in the West, the build quality ridiculously variable, ranging from "perfect" to "entire factory was badly hungover from weekend bender." But they were usually ridiculously simple and user serviceable, and insanely over-engineered, so once the user worked out the factory defects, it would last forever and withstand pretty much any abuse that was thrown at it. A lot of small workshops in Europe will buy this stuff because they can get it cheap and they can rely on it. Look at Lauri's big lathe (hydraulic press channel) It's an ancient Russian machine that he and his dad have modified with modern controls and such, but the thing is a tank. I guarantee that it needed substantial tweaking by the original owner back when it was new, however.
felixar90 yes there were cracks aplenty.
puckcat22679 yes that’s what I meant, over-engineered and pretty heavy duty.
this was made in my country, in Latvia,when it was part of USSR.
In Russia saw repair's it's self
Бред
Использовался для изготовления составных балок (балок Деревягина)
СОЮЗ НЕРУШИМЫЙ РЕСПУБЛИК СВОБОДНЫХ!!
Привет из России
Блин, оказывается я не один из Союза на этом канале!
не один )
VideoGraph это круто
Алексей Степ 👌
Я ваш голожопый союз на хую вращал. Совкодрочеры должны повторить великий подвиг всея свк - стать историей, которую ни в коем случае нельзя повторять, будучи в здравом рассудке.
И вообще, откуда у передающего прЕвЕд "из эСэСэСэР" буржуйский персональный компьютер и интернет? Пиздуйте паять клон "спека" на лампах... И аккуратней, чтобы сосед в НКВД не вломил, а то ещё сгноят по Сибирям за подрывную деятельность и шпионаж
Пиздато в совке было, слов нет.
Свободно так...
Для чего разбирал? Его достаточно воздухом продуть, водкой помыть и дальше работать!
Great job as always Eric
Thanks
Привет из России !!! 🤗✌️🇷🇺
0:53 Russian nano provolka☻
проволОка
сергей приходько проВОДКА
ПроВолодька
Зачем её реставрировать? Она же совсем новая. Надо было просто протереть её волчьим жиром.
The soviet communist anthem killed me aha. Great vid man!
Summer/Fall this year.
Аппарат для установки замков
Whas there rust on your spray can? 17:47
👌👌👌 sooo when are we going to start production of that screwdriver thing?
Cuz I got to get one of those!!!
Haha, maybe one day.
That is the most badass tool I've seen in a while.... fucking mint 👌
I stopped driving a KV2 to come watch this. Zampolit very angry with me.
19:06 Табличка должна была быть снята, выпрямлена и после покраски детали посажена на клепки заново. Халтура!
Why would you need a chain like that as mortician.... :-)
Советское - значит отличное! Потому что работали Инженеры, а не маркетологи. Поработает теперь эта пила ещё лет 40. Жду каждый раз с нетерпением новых проектов :) PS топор, лом и проволока для советской техники просто необходимы и порой мне кажется шли в комплекте.
@@Ananas0902 Не спизжено, а куплено! Знайте своё прошлое и не выдумывайте херни!
Comrade you startle me! When hear soviet anthem, I think telephone ring! You see, soviet anthem is ringtone! Be always ready for Comrade Stalin to call, Да?
Обычный цепной электродолбежникъ. Страшный на вид и опасный для жизни как и Советский Союз. Кроме выбирания пазов под врезные замки больше ни для чего не пригоден. какие нахуй ограждения, пальцы же у всех лишние были ахаха
С плоской отвертки вначале ролика прикололся. Придумают же.
Как он попал в Штаты? на 220вольт. Странно.
контрабанда - наш ответ за Новичка!
Володимир Паршин автор канала из Канады. Может купил на ebay?
Ага, то-то макита аналогичный по степени защищённости ляпает www.timberwolftools.com/makita-7104l-chain-mortiser т.е. "опасный для жизни как и Советский Союз", Что-то не видел я Японии в списках союзных республик?
What I like most on your videos is the fact, that you immediatley start with disassembling and working and not showing every little defective part, rust and so on over and over again like other guys. And of course the sandblasting with your head on the lid. Go on!!!
Ещё бы Вы уважаемый автор субтитры с переводом бы добавили
Цены бы вам не было
I heard the russian anthem but no tachanka turret... im confused
Lol! Sandblasting creepy look!!
Soviet era gear. Cleaning off casting marks requires time, so they didn't. Painting requires time, so they didn't. Sure, it doesn't take a lot of time, but they were utilitarian, aesthetics were not a consideration.
Awesome my brother I can't wait for the 2 part good job very nice later :)
нафига этот цирк с капиталкой? оно и так бы еще сто лет проработало.
Ive only recently subscribed, so Im playing catch up! Great vid, thanks!
We still have a lot of Soviet era stuff here in Estonia. Quality can be a bit suspect, I find lots of their ("Made in the USSR") spanners (wrenches!) have become single ended, i.e. broken in half!
BTW 3 phase is really common in domestic supplies. We have 3 phase coming into our apartment. But we only get a 20 amp company fuse! In the UK the company fuse is 100 Amp!
Cant wait for part 2!
долго ржал когда он не понял зачем пластинка прикручена к копусу )))
Where do you find all of this good stuff!?
After sharpening your wire wheel you should always test the edge with a sheet of paper.
That kind of screwdriver might just work on the oil-pressure relief plugs on old ACVW engines! Ha, cutting a wire with a hatchet, nice. Shows who's paying attention, eh?
I couldn't quite catch what that aerosol can was, though maybe a frame-by-frame could.
That actually is a really nice color on that, good choice by Wood.Work.LIFE! Lovely resto!
Wire cutters?
Nah, working on a Soviet tool, axe will do.
The wiring in this tool is so much nicer than previous american made tools you have restored. And it was grounded, Thats amazing.
20:00 Oh, no! Very wrong color. They were made either unpainted or painted in very bright blue. Approx. the color of your masking tape.
This is going to be fantastic when it's finished :) The colour you picked is great ॐ
That moment when Soviet tools where better made than their government system.
4 years and still noone has liked my comments...Bunch of butthurt commies.
I recently used a more modern version of this (same principle but smoother) they're awesome almost got it stuck in my leg though you have to be careful but they're really cool
0:14 In soviet russia 1070W=3.3A*220V Da komrade
Cracked me up when you head-butted the sandblaster window, and then even more when you looked at the camera with that look. Made my day. XD
Cool color
15:34 - Dude dude dude dude....incredible! 😂 🤣😂 🤣
I love your work, you are the best! regards
Технические характеристики электродолбёжников ИЭ-5601А, ИЭ-5604, ИЭ-5607. delta-grup.ru/bibliot/99/28.htm
Oh No! You made it better & improved it, now it will not work.
ИЭ5601А
widths are 8mm, 12mm, 16mm, 20mm.
no 3/4"
source - www.ktovdome.ru/plotnichnye_i_stekolnye_raboty/osnovnye_operacii_po_obrabotke_drevesiny/9560.html
очаровательный