Thank you for taking the time to make this video sir. The steps you provided and tips you offered are well appreciated. Thanks for having the will power and dedication not to run out at 6:24 and flag down the ice cream man. You're a trooper.
Thanks for saying that about the washers only being on left side. KTM parts schematic only shows the one side, so I'd assumed the other was a mirrored setup, but no. Thanks for clarifying! Wondered if I was shorted the parts in the kit I bought!
I did seal installation the same way. Just a tip: on the chain side, you might want to put in the inner sleeve after the washers, BEFORE pressing in the seals. I did not put the sleeve in for pressing and the spacers got offset a bit, so the sleeve sits a bit tight. Still able to push it in by hand, but requires some force...
thanks for this video! I see that there are number on one side of the bearing, you wrote "facing against washer" so that mean that always facing to external correct? thanks
ha just wondering my linkages I'm trying to get bolt of the frame its loose and turns but still won't come out will heat help get it out with centre punch
Thank you for taking the time to make this video sir. The steps you provided and tips you offered are well appreciated. Thanks for having the will power and dedication not to run out at 6:24 and flag down the ice cream man. You're a trooper.
Thanks for saying that about the washers only being on left side. KTM parts schematic only shows the one side, so I'd assumed the other was a mirrored setup, but no. Thanks for clarifying! Wondered if I was shorted the parts in the kit I bought!
I did seal installation the same way. Just a tip: on the chain side, you might want to put in the inner sleeve after the washers, BEFORE pressing in the seals.
I did not put the sleeve in for pressing and the spacers got offset a bit, so the sleeve sits a bit tight. Still able to push it in by hand, but requires some force...
for the guys who don't have shit laying about nevermind.....this was the only vid with 2 bearings per side. thanks
Cheers for this, just ordered one of your tools.
Where can i buy this tool? The website mentioned in the description seems to be offline.
thanks for this video!
I see that there are number on one side of the bearing, you wrote "facing against washer" so that mean that always facing to external correct? thanks
Is that an ice cream truck I hear!
Morgans tools usefulness..thanks RUclips
Where can you buy the tool? I have tried the web site address without success? Thank you, Mark
Question- Is it normal for the right side to have some side to side play when the final barrel is installed? Thanks
Useful vid cheers 👍
awesome video...great tool
Does Ktm only use that outer seal and not a dust seal as well
Great video Thanks!
Where could I buy the tool you're using ?
www.morgans-tool.co.uk on the "How do I buy one?" page
ha just wondering my linkages I'm trying to get bolt of the frame its loose and turns but still won't come out will heat help get it out with centre punch
Had the same issue on my 2014xc used bb blaster soaked hit it with a big pointy punch
On a weird angle end up taking brake off
How would I get hold of this tool please
Making more now. will be available on ebay from monday 9th march.
What happens when you have rusted to shit bearings
Guy talks way too much!
No GREASE at all on this procedure? Guess you'll be using that tool pretty often!! ha ha
Fernando Biondi I saw him grease but he didn't explain a dam thing.