Been playing the game in 4K with my RTX 4080 on my LG C1 OLED, max settings with DLAA and get constant 100fps. The game is so much better now. I'm getting 15+ kill games every time. Love this game.
How? at 1440p I have a 3070 and an AMD 5600x but can barely pass 40fps even with every single setting on low. Drivers are up to date and all that, but GPU utilization never passes 40%
@uncannyvalley3190 hi there i also have same setup just 3070ti laptop version. What i do is use dx12 instead of dx11. You need not use DLSS. Just select NVIDIA DLSS and use upscaling setting to none. That is u are not actually using DLSS, just bare dx12. If u further need fps then set DLSS to auto. Try this lemme know later
I have a 3060 + 10400, and it is loaded at 40-70% percent, fps is 40-50 on average. I made the priority due to changes in the registry, but still not 100% used. The same fps on high and minimum settings.
Is it common to FPS go down drastically under extreme firefights? I use low settings, no upscalling, 75 fps capped, RX 7600. Sometimes it goes down to 35-40 fps in multiplayer. Test maps and training map gives 75 fps with epic settings around 50% GPU usage. My CPU or rest of the system runs without problem.
It is common phenomenon of fps drops whenever there is artillery or mortar or any extreme gunfights. The game is quite old now since its inception but still the game is relatively non optimised. Test maps are not for benchmarking. Get into 100 player game and go to the place in the map where max enemies are marked. That fps test of squad.
i have 3050ti laptop gpu and when i enable the DLSS scopes are being so blurry and i cant select clearity option with dlss what can i da for this? in your video it's not blurry
Disable DLSS, it renders the game at a lower resolution (blurrier) then upscales it using AI to fill the gaps and make it look somewhat like your native resolution so you can get more fps. On top of that it forces TAA, which makes your whole screen blurry, to hide the ugly jaggies from the lower resolution image. Disabling both the Anti-Aliasing which is TAA in disguise in most modern games and DLSS should improve clarity by a lot but give you a bunch of jaggies, only way to fix that is to run the game at a higher resolution and downscale with something like Nvidia super resolution, but you need a beefy pc able to handle 4K, something with minimum a 4070 ti.
@@LazyBoyA1Hey I have a laptop with rtx 3050, i5-12500H, 16gb ram should i buy this game, i heard so much about it's poor optitization and frame drops
@@rohanrawade3384 Should be able to run it at 30 fps average because the game is very CPU heavy and that i5 is not that good. Then only having 4GB VRAM on that 3050 might cause some out of memory crashes since you don't have that much RAM either to offload the work. Up to you if you want to risk it, you can always refund it before 2 hours. If you're fine with 25-40 fps, it should probably run for a few hours and crash every so often, you could probably mitigate the crashes by restarting after every match though. Oh, and get some sort of external fan as most laptops don't have good CPU cooling and it might cook it otherwise.
I have question i hope get answer My laptop with rtx 3070 and ryzen 7 6800h i play with high setting and usage gpu is 60% and cpu is 35% ! Why ??! I get only 60fps or 50
Hey, I use an rx 6500xt (my first pc) and a 5500 cpu and I run the game squad med at 90 - 100 fps and it’s a really reliable pc for the price . If you play military games and you want a cheap and reliable gpu I recommend this card!! ( I run over 100 fps in med dcs )
hi brother, I have a gtx 4050 video card, but I realised that I can't activate NVIDIA REFLEX LOW LATECY, it is closed for use, is there a way to activate it?
Try to enable your core, press WIN + R and then type msconfig go to 'boot' choose advanced option and then check the number processors and choose the higher number, reboot. hope it works for you
@@really.savage Yh it’s very low but I like how efficient it is and I did get it for £900 instead of £1100. Anyway maximum performance mode is not a thing on this laptop but MSI has a performance mode which I already have on
Tip: Enable XMP Profile in Bios Settings as well as the bpo. Those are 2 Clicks and you can do nothing wrong with it. Got from 83 fps and drops to 45fps to 115fps and drops to 97.
From 120 to 20 FPS brand new pc 32gb ram ryzen 5560 amd rx6600 8gb Dx11 everything on low 2k resolution. I dont know how people getting stable 120 fps with the same pc specs
You can Try display driver uninstaller and nvclean for clean install of nvidia drivers. moreover uninstalling the game. rebooting the system . deleting the leftover files and then finally reinstalling might help. Only suggested if you have a good internet connection and data allowance.
@really.savage I have done all of this even reset windows all the games working perfectly with dx 12 just this game not working and it's sucks because I love this game its so good
did you maybe try using studio drivers? I'm playing with RTX 4500 ADA what is essentially 4070 with DX12. But of course I'm using quadro drivers because of this. Still, studio drivers might help. I'm using version 551.52.
I have RTX 3070 but ı am getting that error below of the DLLS sharpness setting (DLSS-FG SUPPORT DETAILS: NotSupportedHardwareSchedulingDisabled ) how can ı fix that or ıs ıt give me same fps ? may you help me
I request to repair your game via steam. That DLL might be corrupted for you. Moreover try installing nvidia drivers using nvclean. Maybe run a AV scan. Some malwares also might be causing this.
@@Reyaon I have the same thing and I use dx11 because fps is more stable even tho dx12 gives you more fps it’s not worth it since you will just lag as soon as you get shot at.
I have 2070 super, i12 and i was playing for maybe around 50hrs on dx12 and I experienced a lot of fps stuttering and drops during the close combat and during the zoom in with some optics. So i tried to get all on low, but still happening. Do u think that dx11 will be better option for my pc?
You can try Dx11 but before that i will request you to use Nvidia image scaling and try if the issue of fps drop is fixed. If nothing improves u shld try DX11
@@really.savagemy set up is very similar to yours and yet your game looks so much better with a higher fps… I’m so confused. I have an i9 10920X, Corsair 64GB ram and 3070 Ti and I’m getting 30fps sometimes less on these settings… help! 😂
@Vazio26 hi thats very concerning and surprising to hear. This kind of beast pc u have got, i have a laptop btw. Pls try windows optimisation. Github has many free utilities for that. Driver updates, game repair and AV scan might help. As a last resort i suggest you do a windows reset/reformat. If some hardware issue is there pls get it checked in warranty.
![Azov storms and clears enemy positions. Destruction of occupiers from the first person [+ENG subs]](http://i.ytimg.com/vi/PvolEEFTkYo/mqdefault.jpg)
Been playing the game in 4K with my RTX 4080 on my LG C1 OLED, max settings with DLAA and get constant 100fps. The game is so much better now. I'm getting 15+ kill games every time. Love this game.
4k 100 fps😍😍
@@really.savage it's amazing
Should record some videos and upload them.
How? at 1440p I have a 3070 and an AMD 5600x but can barely pass 40fps even with every single setting on low. Drivers are up to date and all that, but GPU utilization never passes 40%
@uncannyvalley3190 hi there i also have same setup just 3070ti laptop version. What i do is use dx12 instead of dx11. You need not use DLSS. Just select NVIDIA DLSS and use upscaling setting to none. That is u are not actually using DLSS, just bare dx12. If u further need fps then set DLSS to auto. Try this lemme know later
damn dude spare some
thanks, this helped me get more consistent fps. way less stuttering now than before.
Glad I could help
Random question that google can't answer. I have a NVIDIA GEforce GTX 1650 but my Super sampling options are for AMDFSR. does anyone know why?
What do you mean? If you mean why not dlss, because only Rtx graphic cards have the compatibility with dlss, so you can’t use it on 1650
However FSR2 is available for all kinds of GPU
I have a 3060 + 10400, and it is loaded at 40-70% percent, fps is 40-50 on average. I made the priority due to changes in the registry, but still not 100% used. The same fps on high and minimum settings.
u got a bottleneck
What CPU do u have
@@nothingtoflexbtw56805 10400
CPU name ?
Is it common to FPS go down drastically under extreme firefights?
I use low settings, no upscalling, 75 fps capped, RX 7600. Sometimes it goes down to 35-40 fps in multiplayer. Test maps and training map gives 75 fps with epic settings around 50% GPU usage.
My CPU or rest of the system runs without problem.
It is common phenomenon of fps drops whenever there is artillery or mortar or any extreme gunfights.
The game is quite old now since its inception but still the game is relatively non optimised.
Test maps are not for benchmarking. Get into 100 player game and go to the place in the map where max enemies are marked.
That fps test of squad.
Hey I have a laptop with rtx 3050, i5-12500H, 16gb ram should i buy this game, i heard so much about it's poor optitization and frame drops
i have 3050ti laptop gpu and when i enable the DLSS scopes are being so blurry and i cant select clearity option with dlss what can i da for this? in your video it's not blurry
Set anisotropic filtering to max. Also tinker with DLSS Quality and DLAA.
Disable DLSS, it renders the game at a lower resolution (blurrier) then upscales it using AI to fill the gaps and make it look somewhat like your native resolution so you can get more fps. On top of that it forces TAA, which makes your whole screen blurry, to hide the ugly jaggies from the lower resolution image. Disabling both the Anti-Aliasing which is TAA in disguise in most modern games and DLSS should improve clarity by a lot but give you a bunch of jaggies, only way to fix that is to run the game at a higher resolution and downscale with something like Nvidia super resolution, but you need a beefy pc able to handle 4K, something with minimum a 4070 ti.
@@LazyBoyA1Hey I have a laptop with rtx 3050, i5-12500H, 16gb ram should i buy this game, i heard so much about it's poor optitization and frame drops
@@rohanrawade3384 Should be able to run it at 30 fps average because the game is very CPU heavy and that i5 is not that good. Then only having 4GB VRAM on that 3050 might cause some out of memory crashes since you don't have that much RAM either to offload the work. Up to you if you want to risk it, you can always refund it before 2 hours. If you're fine with 25-40 fps, it should probably run for a few hours and crash every so often, you could probably mitigate the crashes by restarting after every match though. Oh, and get some sort of external fan as most laptops don't have good CPU cooling and it might cook it otherwise.
@LazyBoyA1 can you recommend me some other milsim games which would be fun to play
perfect bro thanks, this is better then letting Geforce Experience fix automatically settings optimize
why I cant use NVIDIA Reflex?
Same
Maybe its a bug in this update. I was also unable to use it.
New video on Squad Settings uploaded recently.
I have question i hope get answer
My laptop with rtx 3070 and ryzen 7 6800h i play with high setting and usage gpu is 60% and cpu is 35% !
Why ??! I get only 60fps or 50
Try -useallavailablecores as launch options
Hey, I use an rx 6500xt (my first pc) and a 5500 cpu and I run the game squad med at 90 - 100 fps and it’s a really reliable pc for the price . If you play military games and you want a cheap and reliable gpu I recommend this card!! ( I run over 100 fps in med dcs )
not me crying in 6700xt i7-4790k
hi brother, I have a gtx 4050 video card, but I realised that I can't activate NVIDIA REFLEX LOW LATECY, it is closed for use, is there a way to activate it?
Ingame option is disabled for some unknown reason.
Try forcing it through Nvidia control panel
What is the best sensitivity to get the best aim stability ? Im using the 1.00 in sensitive
Depends on your dpi. For 800 dpi its gud to have 0.6 for 1600 reduce it to .3
for some reason its blurry and the trees go all black fuzzy. bad fps drops etc when i play running with a 3060ti
Try DLAA in DLSS mode and set sharpening to 1
I get crazy fps drops even on rtx 4060 (45W) any clue as to why?
Try to enable your core, press WIN + R and then type msconfig go to 'boot' choose advanced option and then check the number processors and choose the higher number, reboot. hope it works for you
45W is quite low for a high end GPU. I believe you have a laptop. i ll suggest run ur laptop on max performance mode.
@@really.savage Yh it’s very low but I like how efficient it is and I did get it for £900 instead of £1100. Anyway maximum performance mode is not a thing on this laptop but MSI has a performance mode which I already have on
@sarunas8638he didn’t upload a misleading video tho😂
Incorrect, you can "overclock" your CPU via BIOS, to enable maximum output. Given you aren't already using the max parameters. @sarunas8638
Thank you, I ran the game at 40-60 fps with a 4070 and an i7 13700f, now I'm getting 150+ fps consistently.
You got urself a beast.And i hope u have tamed it well now. Go squaddie
It’s shame that the game runs so bad on a PC like yours. You shouldn’t be even bothered with managing the graphic settings.
Fuck this i hate play games on low gtaphics
Can i run squad on like 50-60 fps with the lowest settings on my specs
RTX 3050 4gb
16gb ddr4 ram
Ryzen 5 6600H
1tb ssd?
Yes yes you can but sometimes the explosions and mortar shelling will reduce FPS a bit
Tip: Enable XMP Profile in Bios Settings as well as the bpo. Those are 2 Clicks and you can do nothing wrong with it. Got from 83 fps and drops to 45fps to 115fps and drops to 97.
You are correct but i dont have a xmp capable MB but its a Gud suggestion for other who have desktop
From 120 to 20 FPS brand new pc 32gb ram ryzen 5560 amd rx6600 8gb
Dx11 everything on low 2k resolution.
I dont know how people getting stable 120 fps with the same pc specs
Try FSR2 with dx12
@really.savage thank you now i have 144 FPS ! ; )
Hey, thanks for the video, are you setting your resolution higher than your monitor or are you using a 2k monitor? thanks!
Hi there i have a 1440p laptop display so its at native resolution
@@really.savage Thanks!
I have rtx 4070 when I am using dx12 its crashing so I can only play on dx11 any help ?
Same thing happened to me, apparently nothing you can do at the moment
You can Try display driver uninstaller and nvclean for clean install of nvidia drivers. moreover uninstalling the game. rebooting the system . deleting the leftover files and then finally reinstalling might help. Only suggested if you have a good internet connection and data allowance.
@really.savage I have done all of this even reset windows all the games working perfectly with dx 12 just this game not working and it's sucks because I love this game its so good
@BenSaada-ww4tb i have run out of ideas with this issue. Maybe u can try updating a backdated nvidia driver of January 2024.
did you maybe try using studio drivers? I'm playing with RTX 4500 ADA what is essentially 4070 with DX12. But of course I'm using quadro drivers because of this. Still, studio drivers might help. I'm using version 551.52.
How Can i Enable Nvidia Reflex Low Latency Its Like I Cant Click On It Please Help
Its a bug I believe i m also unable to enable it
I have RTX 3070 but ı am getting that error below of the DLLS sharpness setting (DLSS-FG SUPPORT DETAILS: NotSupportedHardwareSchedulingDisabled ) how can ı fix that or ıs ıt give me same fps ? may you help me
I request to repair your game via steam. That DLL might be corrupted for you. Moreover try installing nvidia drivers using nvclean. Maybe run a AV scan. Some malwares also might be causing this.
Try DX12 if you have DX11 in the settings
Can you tell me what music this is? Its amazing!!
It's the squad ost
Should i use dx12 or dx11 for a rtx 2060?
Pls try dx12 at 1080p. And switch on dlss
@@really.savage thxx
my specs are R5-3600, RTX 3070ti is it okay to use this setting?
Just try DX12 without any DLSS. Then if u get drops try dlss also
I love music from Squad
I would like to say if you have an older gpu use dx11 it gave me a huge performance boost over dx12
Yes you are true.
But i am outling the fact about this new DLSS update and if the use has got RTX gpu.
Otherwise no major performance update is there.
i have gtx 1650 should i use dx11 or dx12?
@@Reyaon I have the same thing and I use dx11 because fps is more stable even tho dx12 gives you more fps it’s not worth it since you will just lag as soon as you get shot at.
@@Reyaon I would also recommend to turn everything down except view distance and textures I usually get around 70 fps and 50 in a gunfight
@@Lord-x3k Have a GTX 1060 6GB (bc of laptop). I used DX11 and got around 30-45 fps with medium-high settings.
I have 2070 super, i12 and i was playing for maybe around 50hrs on dx12 and I experienced a lot of fps stuttering and drops during the close combat and during the zoom in with some optics. So i tried to get all on low, but still happening. Do u think that dx11 will be better option for my pc?
Also my pc is full gaming optimized, boot settings, graphic settings, nvidia's, everything is right.
You can try Dx11 but before that i will request you to use Nvidia image scaling and try if the issue of fps drop is fixed.
If nothing improves u shld try DX11
why can you only put resolution scale up to 125 it used to be 200.
I believe devs have some sort of grand scheme to get the performance issues under control.
Nice one ❤
Thanks 🔥
used the guide, then realized i can just set everything to high or epic, and still have 140+ FPS on 1440p with a 4070S and DLSS Quality.
until you get in a big gun fight lol
@@weedless9531 still at 100+ fps then
What rig do you have?
i7 12th gen.
RTX 3070ti 8gb
32 GB DDR4.
@@really.savagemy set up is very similar to yours and yet your game looks so much better with a higher fps… I’m so confused. I have an i9 10920X, Corsair 64GB ram and 3070 Ti and I’m getting 30fps sometimes less on these settings… help! 😂
@Vazio26 hi thats very concerning and surprising to hear. This kind of beast pc u have got, i have a laptop btw. Pls try windows optimisation. Github has many free utilities for that. Driver updates, game repair and AV scan might help. As a last resort i suggest you do a windows reset/reformat. If some hardware issue is there pls get it checked in warranty.
Thank you bro
💪🏻 Go Squadie
DLSS is like Wheel 2
Does dlss 3 support rtx 2070 super?
No its not on 2000 series card
Still seems blurrier than with all anti-aliasing turned off :(
DLAA How is it working for you
@@really.savage turned it off because the scope seemed real blurry. Gone for anti aliasing with clarity scope setting
@@Bishop1664 I had the same problem. Change from Direct 12 to 11.
That will do good in dx11 . But i am just checking here what potential DLSS can bring to squad.
Dx12 crash everytime, its normal ?
No it aint normal. Pls check compatibility of dx12 gpu and also update the drivers and repair the game
Unreal has a problem with DX12, its normal at this momment
@TheMacscherer we have got some patches recently they might have fixed it
brother ur mouse control with scope is so bad, increase ur dpi and decrease ingame sensitivity please, u ll thank me later
Will do so brother
thanks bro
what is ur gpu
3070ti
I cannot click my settings
Uninstall squad
Reboot
Run disk cleanup
Uninstall junk programs if any
Then again reboot
Install from steam again
graphics quality low?
Nah medium with dlss or DLAA
rtx 2060?
Mine is 3070ti. But its laptop gpu and cooling is not so gud
2060 will run it at gud 50 to 60 fps
Try lower settings and ofcourse use DLAA
fps gain😊❤
Çok güzel oyun ya❤