How to upgrade audio-video intercom DS-KIS604-P Hikvision video intercom villa door station POE Kit

Поделиться
HTML-код
  • Опубликовано: 24 ноя 2024

Комментарии • 17

  • @hazharkurdish686
    @hazharkurdish686 Год назад +1

    Amazing 👏

  • @mihaidragoscretu7276
    @mihaidragoscretu7276 8 месяцев назад +1

    Did you manage to get push notifications on hik connect app on iphone ?

    • @seiluk
      @seiluk  8 месяцев назад

      Thanks to watch my video yes by default push notification is enabled. If you don’t receive call on phone go to home screen Hik-connect app. When you on app iPhone you see on right corner 3 dots (…) click and you see setting in there you see push notifications is enabled. If your one disabled then you should enable. If you still not receiving call then go to iPhone settings go to Hik-connect app and allow notifications. Hope this is ok for you under standard. If you still problem check firmware updates with latest one good luck.

  • @seguricam6855
    @seguricam6855 Год назад

    Because the image looks different from the other video, if they are the same model DS-KIS604-P. One looks normal and the other looks like fisheye

  • @Horizon301.
    @Horizon301. 3 года назад +1

    Can you connect all POE systems to a wifi extender if a router isn’t easily accessible to the cable?

    • @seiluk
      @seiluk  3 года назад +1

      yes you can client router away from extender 10 meter far. As you see this video this house is fully decorate i used all old cable. i need lan cable so i used tplink extender as i show in video. Works fine link with mobile phone and link with hikvision dvr as show in video. For small network extender is good if you have more devices run lan able from router hope this is ok for you thanks to like my video.

    • @Horizon301.
      @Horizon301. 3 года назад

      @@seiluk yep that’s really helpful, thanks!

  • @lbishop100
    @lbishop100 2 года назад +1

    Hi there, I have just installed Hikvision DS-KIS603-P IP PoE HD 2MP Wifi IP65 Video Intercom 7-Inch Touch Screen. I have added it to my nvr, but it doesn’t record ( playback ) and is there any way I can have the audio on before someone rings the bell? Thanks

    • @seiluk
      @seiluk  2 года назад +1

      which nvr you used send model number. Audio you can control used ivms software www.hikvision.com/en/support/download/software/ivms4200-series/

    • @lbishop100
      @lbishop100 2 года назад +1

      Hi, nvr DS-7604NI-K1. I think I have sorted the recording . As had it set to motion, changed to continuous. I have ivms, where do I need to enable the microphone before someone presses the button ? Thanks

    • @seiluk
      @seiluk  2 года назад

      @@lbishop100 go to audio video and also set event area

    • @lbishop100
      @lbishop100 2 года назад +1

      Fantastic, thanks. I am getting a new nvr tomorrow. HIKVISION DS-7608NI-I2/8P 4K 12MP POE NVR 8 CHANNELS 8 POE PORTS IP UK .
      I currently have 2 camera’s and a door bell. I have a 4TB HARD DRIVE in my current NVR. How do I wipe that, so I can fit it to the new NVR? Thanks again

    • @seiluk
      @seiluk  2 года назад

      @@lbishop100 see my this video ruclips.net/video/xk2gkZYkICA/видео.html

  • @sajedqatar8846
    @sajedqatar8846 2 года назад

    May i use this without wifi connection??

  • @TeQniX84
    @TeQniX84 Год назад +1

    Thats a terrible install indeed...