Verdaderos artesanos muy Áviles y valientes , en Estados Unidos jamás trabajarían sin ninguna protección ya que ellos extreman medidas de seguridad casi absurdas , en estos trabajadores veo que no tienen ningún equipo de seguridad y pero también persibo que son muy Áviles y con un talento especial adquirido por tanto tiempo trabajando en verdad que son muy buenos en lo que trabajan mi más profunda admiración por estos excelentes trabajadores saludos desde México.
They always do it, we here in the west tries to say something, & all they say is its traditional & they have been doing it for a long time, so they are used to it. The dumbest answer around, but if they don't care, why should we?
It’s not just the primitive work conditions, lack of benches and no safety wear…it’s the fact that all these places are such total shitholes. With dirt, scrap and junk just slung all over the place getting in the way and waiting for someone to trip over it. No matter how poor you are keeping the place neat costs nothing. I wonder if their houses are the same? 🤔
Yes, and is a single 'roupee' ever ploughed back into the "business" for improvements? A common factor of these "businesses" is they seem to be basically 'knock-off' shops. But there again, they meet the affordable needs of their customers.
Un pena en las condiciones prehistoricas que trabajan en esta fundicion,estas personas..a pie descalzo..uff una verguenza estos paises ..tienen talento pero mal explotado
Verdaderos artesanos muy Áviles y valientes , en Estados Unidos jamás trabajarían sin ninguna protección ya que ellos extreman medidas de seguridad casi absurdas , en estos trabajadores veo que no tienen ningún equipo de seguridad y pero también persibo que son muy Áviles y con un talento especial adquirido por tanto tiempo trabajando en verdad que son muy buenos en lo que trabajan mi más profunda admiración por estos excelentes trabajadores saludos desde México.
Өтө таң калыштуу усталар заводской аппаратсыз жасашат карапайым 👍👍👍👍👍👍👍
I never realized they poured those blades. I always figured they were actual blades attached into the frame. Amazing work.
they didnt pour them that what he was protecting with sand at the begining
The blades are stainless (?) steel. Their endings are embedded in the aluminium. Aluminium is not strong enough for potatoe pressure ! 😉
Apparently, it is.@@Stefan_Van_pellicom
UNOS MAGOS ESTOS SEÑORES. GRACIAS POR COMPARTIR. FANTASTICO
Good to see the smelter operators are wearing their fire resistant sandals…..
Safety doesn't have to be uncomfortable.
😂😂😂😂😂😂
You could make some awesome sand castles with that type of sand.
Thanks for watching
Skill, skill, skill. Masters of the Universe. Western media do not want us to know about these abilities.
Where can I get a pair of those awesome safety sandals?😎
I think they’re steel toed ones. Make sure you get steel toes. The only safe ones.
@@walshy2116 safety first
You already have them.
They're handed down from generation to generation.
😂
yo tengo está máquina de los 3 cortes y es maravillosa. te ayuda muchisimo para trabajar mas rapido.Aguante Argentina
Donde las venden quiero una para mi trabajo
Incredible work 💪👷👏
excellent job but pl provide safety tools to worker
Think about safety Think about their families 🙏🏼
What is that White Powder they are Using?
Thalkam powder
@@mdpappu1029which mean to use for sand clay from stick or something
Factory kis jga hai
Amazing rocket science!
This are Aluminium and food grade steel need to be used, though it's economical, not recommended
Good point 👍
3:45 How that piece was made???
please tell me what you add to the sand so that it does not thorn, please tell me
👍👍👍👍👍👍👍👍Я ТОЖЕ ХОЧУ ТАКУЮ👍👍👍👍👍👍👍👍
Thanks
@@logiccreations9176 хочу такую классную резку ля овощей и фруктов , в Россию можете выслать ?
@@Lokijuhygtfпоищи, в сети полно
Factory kaha par hai? Cutter machine mangwa sakty hai?
Plz guide?
Wow amazing. How to order and how much it's set?
Thanks for watching ❤️
@@logiccreations9176 hey I have project I want these device
@@logiccreations9176ok
Contact number
Working with molten metal in sandal, not a good idea
They always do it, we here in the west tries to say something, & all they say is its traditional & they have been doing it for a long time, so they are used to it. The dumbest answer around, but if they don't care, why should we?
Those are safety sandals!😎
@@donaldduck4867 oh yeah, we keep forgetting that🤣🤣
Aoa, is that faisalabad or gujranwala?
Sir which country is this?
Pakistan
How can i get the french cutter machine from you? I am from Bangladesh. pls let me know.
They sell these on Amazon ... $100 + or - ...
Where is this factory located ?
🌷🌷🌷🌷🌷🌷🌷🌷🌷
good. Like
Thanks for watching
I want to buys these and how can we contact them?
Как мы можем покупать такие инструменты кто нибудь знает подскажите пожалуйста
What would you like to buy?
I’d like to buy a few sets of these , from where ?
What's up ke I have this machine in India
شاباش يا خان 🤙🤙🤙🤙🤙🤙🤙🤙
Bhai Amazon PE isko becho achchhi bikegi
Bhai lena hai kaise milega ye machine hame
They attached great importance to occupational safety, some of them wore slippers.
iş güvenliğine çok önem vermişler terlik giymiş bir kısmı.
Ye jagha kahan hai?
Bangladesh a dewa jabe
It’s not just the primitive work conditions, lack of benches and no safety wear…it’s the fact that all these places are such total shitholes. With dirt, scrap and junk just slung all over the place getting in the way and waiting for someone to trip over it. No matter how poor you are keeping the place neat costs nothing.
I wonder if their houses are the same? 🤔
Yes, and is a single 'roupee' ever ploughed back into the "business" for improvements? A common factor of these "businesses" is they seem to be basically 'knock-off' shops. But there again, they meet the affordable needs of their customers.
Okay why don't you donate to help them get better equipment instead of whining about it?
Mujhy cutter lena hy kahn se mily ga karachi men
Isko sharp kasay karay buhat zor leta ha katnay mein
Address bahi
Gud
Thanks for watching
Psen 1 bisa gak.kirim indonesia
Sirji, you are very smart craftmam
Thanks 😊….
Where is your factory..... address please....what is the price of the total mechine
Узбекистане 100&
Good
Thanks for watching
Which area and country is this
Pakistan
Where is your location
Can anyone break down the process in text? How are they sharpening the blades?
Talented Pakistani People
Узбекистонга йетказиб беришбилан канчага тушаркан
8:39
İşçinin sefaleti ve üretim kabiliyeti
6:55 The weirdest part of the video is seen someone not using sandals.
And then people wonder why they buy it, and after a few uses the casting breaks.
As gee,...they skimmed off MOST of the slag
No. I am using this. New blades available in market in just 1 dollar
From which market we can get the blade? @Ek Ghost
Mujhe bechane ke liye chaiye .kitne milega.aauer contity batavo
Yeh Pakistan may hay
Minium good products prices rs.700
60&
Contaminated metal, what toxic substances are in there, food grade - what a joke
How much this product
60&
भाई मुझे लेनी थी य़े कैसे मिले गी
Most likely Videos #Greatskills
Bonito video
Для меня загадка, что за предмет и для чего он нужен?
в описании ролика написано, что это детали устройства для нарезания картофеля, для картошки фри.
Марковка резеа
Картошку резать марковка лук для кухни карочи
Amazing.
Thanks for watching
i just looked these up on eBay and Alibaba then the video shows up
Thanks for watching
👍👍👍👍👍👍👍👍👍👍👍👍👍
Thanks
This is not available in india
भाई साहब जी ये मशीन कहा मिलेगी मुझे मगवानी है आप के नम्बर भेजना भाई साहब जी
I need one
Un pena en las condiciones prehistoricas que trabajan en esta fundicion,estas personas..a pie descalzo..uff una verguenza estos paises ..tienen talento pero mal explotado
Босые литейщики это трэш!!!!
جميل جدا
Bahi in ka number mal sakta hai plz
А потом продукция из Европы))))
the admin can answer exactly in which city you are in Pakistan, I will come to you and we will draw up an agreement
😮😊😊😊😊😊😊
No safety precautions
Zor
Мне нужно 60 штук оптовый сена сколько $
Бесплатно
60&
Что за песок кто знает
RTX4090 heat-sink
If I wanted to get hold of their products, How can I reach out to them? contact details please.
They will get you onto the delivery list, looks like you will see delivery around mid 2024!
Chips??????? Potatoes.
Manual Frenchfries Cutters for commercial use.
mo no milega kya iska
Frame banane ji
Hii
I don’t think I would go through all that much trouble for french fries I will just go to McDonald’s or to Wendy’s for some those poor people’s feet
Number de do bhaiya
Yeh Pakistan say Hay, number say kia krogay
O chwlay .... factory ka koi name , address ya number hi daal datay .. teri video ka unky business ko to faida hota
Маладци
q habilosos
Thanks for watching
English bolny walu ko hi reply datayho jasa Sala lgna ay ona da
I just purchased one from Ludhiana, India @8500/- and got transported to Hyderabad
In pakistan, these price is from 1500 to.5000 pkr. In dollars 7 t0 15 dollars depending on size
@@ekghostofficial This is Aluminium, mine is food grade steel 👍
@@kiranmetpallyاين رابط الشراء الذى اشتريت من خلاله
ان کا نمبر مل سکتا ہے
schrecklich wie es dort aussieht
#1 lol
😊%😊ñ
Thanks for the visit
Ŕ g
brvo
یا ایڈریس دے دیں
Alguien me puede explicar porque ellos no usan zapatos para trabajar...es muy peligroso hay se trabaja con cosas muy calientes