WOW!!! This really is First Class tuition… Seriously, these guys are lifting the veil on this complicated discipline in Layman’s terms. Really, Really good production… Thank you very much 👏👏👏👍
I have a genie lift that has a platform tilt valve with two counterbalance valves . I get no motion of the platform cylinder. The directional control spool functions normally. Should I suspect one or both counterbalance valves are defective ? Pressures at the cylinder are both at max system pressure.
What orifice capacity is suitable for load motion valve dampening pilot piston, for stable pilot opening and smooth load lowering? Is it necessary to put an orifice for load control, load reactive Sun Hydraulics MB** series valves?
Please give me information about holding valve boom of my machine gets stuck in the middle not down while working, I have to turn off the machine and then turn on the start again and the boom is down.
Ran into your video after buying a compact tractor and trying to better understand the hydraulics. On the rear its got an hydraulic top link that bleeds down. Sounds like an application for a pilot operated check valve. On the front, the tilt when using the grapple is quite jerky with a heavy load, sounds like an application for an over center valve.
Can you tell me what kind of valves i have,if i show you a picture and model numbers,also you should so some videos on how to clean a vavlve, mine are running slower than normal, thanks mario
Excellent. I wish this channel existed twenty years ago.
WOW!!! This really is First Class tuition… Seriously, these guys are lifting the veil on this complicated discipline in Layman’s terms. Really, Really good production… Thank you very much 👏👏👏👍
Oh my God, 2 hours of free training, Carl you are great !
Jagdish India
@@JagdishSingh-ji8bt 0
@@JagdishSingh-ji8bt 0
@@JagdishSingh-ji8bt😊
Thanks for this. It really gave me a much deeper understanding of how these valves are selected and what the goal of adjustment is.
Thank you, my friend.
You're a wonderful teacher.
What a great video to help truly understand OCV and POCV circuits. Thanks
fantastic stuff and extremely well presented
Thank you, my friend.
Hi good day
Thanks for free training
Thank you, my friend.
Thanks sir ,please one class for training the truck starring box
Carl, this is great as always 👍🏻
Thank you for your discussion, it adds knowledge to us
Thank you for everything you and your team does, I'm very impressed. This feeds my mental curiosity to say the least!
very informative for linear motion control valves for controlling overrunning of shafts and booms on hydraulic machinery
thank you for everything this is Ahmed Salem from hadramout
You're one of the best
hello from Thailand
I have a genie lift that has a platform tilt valve with two counterbalance valves . I get no motion of the platform cylinder. The directional control spool functions normally. Should I suspect one or both counterbalance valves are defective ? Pressures at the cylinder are both at max system pressure.
What orifice capacity is suitable for load motion valve dampening pilot piston, for stable pilot opening and smooth load lowering? Is it necessary to put an orifice for load control, load reactive Sun Hydraulics MB** series valves?
Please give me information about holding valve boom of my machine gets stuck in the middle not down while working, I have to turn off the machine and then turn on the start again and the boom is down.
Hi Carl, great video as always. Shame you couldn’t talk a bit about the Cindy valve on the bench, great product.
Can a pilot operated check valve fail so the ball does not unseat?
Very nice graph
Hello sir,greate topic,and more info to learn from lunchbox.thank you very much...Jojo Jencer: from Houston Texas...
Thanks for sharing
Master
Ran into your video after buying a compact tractor and trying to better understand the hydraulics. On the rear its got an hydraulic top link that bleeds down. Sounds like an application for a pilot operated check valve. On the front, the tilt when using the grapple is quite jerky with a heavy load, sounds like an application for an over center valve.
hi from uganda nice work
Useful video, thank you !
The counter balance valve at 20.26 is that only used on closed loop pumps and can you explain why?
27:53 what is that? Black colour symbol.?
Great content...thanks a lot for knowledge transfer....thank you sir
Thank you, my friend.
Very nice video ❤
OMG that very much helpful video
Informative.
Thank you for sharing information
regarding counter balance valve.
God bless
excellent content! I appreciate it.
Thank you, my friend.
very good .THANKS
Hello from Cambodia
I m from RDC kolwezi , but in french end non english please possible to elp me ?
Hello sir! can i used the counter balance valve in the tandem center DCV? thank you.
Very good
Nice to meet you good friend,
Can you tell me what kind of valves i have,if i show you a picture and model numbers,also you should so some videos on how to clean a vavlve, mine are running slower than normal, thanks mario
How can I get a crystal?
Hi from Singapore
thankyou sir
Hanzhen harmonic drive gear , robot arm gear, over 30 years experience
Hello new here... When is your next live training session?
From Trinidad lock on.
I wish when the video is posted it will be in it. Explanation in Arabic
Good morning
Come, listen, learn Bro..👍
CE from Boka Atlantic vessel
❤❤❤
Very2 informative
hello from brasil
hi from utah
Hello um from Ethiopia
Yeah baby
Keren
Thanks lunch box give to free training
nicee
Thailand
😮😮
Bangladesh
COOLINGKING truck radiators say hello to u。
Mr Olds go Stupid kuwait , ImSmart Billyard Ball , I dont like study
Great content...thanks a lot for knowledge transfer....thank you sir