One of the best GM DIY channels out there - really appreciate your work my friend! Did the same swap on my RCSB several years ago but included the matching AC/heat vents, the side panels (that you mentioned) and swapped out the handle above the glove box with a leather one. Found a Birchwood dash bezel, and then one of the long overhead consoles to match! All for under $200. Completely transformed the interior. Again, great work and super nice truck!!!
Thanks to the purchase of my 02 Tahoe I stumbled o ur channel n I’m loving it...... great content bro thanks for all u do to teach us all the tricks 👍👍👍
Wow! That console and lower trim looks amazing! Well done utilizing items from the GM parts bin, and at a great price! That looks really sharp, Travis. And yeah, finishing touches will bring it together. But, great vision of the end result. I can see it in my minds eye. I would have never though about this. Well done! Keep up the great content!!!
Great video! I have a base model 2005 Silverado single cab that was originally my grandfather’s last farm truck. I’m slowly making it mine, one option at a time. I’m hoping to do the full console conversion next. I’m lucky enough that my nephew has a 2005 Silverado extended cab with one and he may want the fold down center seat that I’ve already bought. It’s going to be difficult to wait for Spring of 2024 to get the console, or maybe not. I’m not positive, but I think the interiors of our trucks are even the same colors. I hope so, because if not, he might be turned off of the plan. My truck also has the manual locks and roll up windows. That’s okay with me. I can still someday get the door panels covered with vinyl or leather for a different look. I also have the black vinyl floor in my truck, but it’s in practically perfect condition and the carpet isn’t worth the hassle of getting it. All I’ve changed so far in the interior is getting the white-faced SS gauge cluster with blue LED backlighting. I love it. Videos like this one are very educational and helpful for me. It’s just crazy how easy it looks to do. If it were up to me, we would get this done on a nice day soon. But Nephew is the one who decides when, or if. You showed me how, said which size tool to use, where the bolts or nuts or clasps are, and went through the process with great advice and instructions. Thanks again.
My 04 is Tan with that stupid jump seat. I've had it 3 weeks and no console is making me crazy!! Man it looks good I'm only doing that console after this vid mine is all tan with vinyl floor
That really brings back memories of my 2006 Chevy I bought new, It was a Regency Badlander conversion 4 x 4 white with gray interior it also had carbon fiber trim pieces with a silver and red instrument cluster look cool at night when the light were on keep up the good work love your videos.
Finally got my 00 silverado and ur truck is inspiring truck been cleaning ships out of it fixing a bunch of broker parts..got lucky it came with a 5.3 n power windows, and lowered.
I swapped the escalade woodgrain into my 04 denali xl that had the silver graphite in it. Door panels, dash pad, center console pieces with clock and flip out ash tray, woodgrain steering wheel (spray dyed the air bag), gauge cluster and dash bezel. Also got the 07 caddy 22's and some gmc caps for them. Still have to install the stainless roof rack. I like the little touches of the escalade. But I dont want drive one. Plus the dished pistons on this U vin 6.0 make great compression with a 799 head swap.
I had the same dark interior. I swapped to light gray electric leather seats, bottom dash, kick panels and electric door panels. Looks great. Panels are light gray with light tan arm rest. Looking at doing the arm rest charcoal. Keep up the good work. Headliner was already light gray match’s perfect.
Looks good. I also did this with my sons 2500 HD Silverado and added the power seats from a Tahoe. The light grey seats really look so much better with the two tone grey.
Two-tone looks good. I did my swap a couple months ago and scored a complete dark charcoal console at a pick n pull style salvage yard for $16. Its amazing how heavy they are with sub, amp and radio controls.
a good upholstery shop can fill those holes in the knee bolster and redye the plastic. Also, GM sells the push pin fasteners that you need for the front of your console where those holes are in the correct color.
Awesome job bud! I think it pops with the color of the truck...any color other than green I dont think I would like it as much. Keep up the good work and attention to detail...as always you rock!
Never tough that it would look that nice, i put a console on my truck aswell but i end up painting everything black, btw your tryck is becoming one of simple but sick trucks in youtube
On these base model trucks I always add the black plastic cover under the passenger side of the dash, cleans up the look a lot. Although this is a dumb time to mention this as you would have to take the console back out to install it.
Definitely interested in the power window mod. I have a complete Tahoe donor and would like to move everything over. And of coarse, the 5.3 is getting moved to the truck! Bye bye 4.3
That two tone looks good in there ....once u do the seats and door panels two tone ,it's really gonna set it off .👍🏿👍🏿👍🏿👍🏿...the interior is really clean....
Nice job! I have a 2000 gmc sierra. Could I use the glovebox and knee panel that’s in the truck now? Seems like I can cut out the parts that doesn’t fit. I know it’s been awhile since this video but, I really want to know. Thanks!
Turned out awesome - as always. Have you thought about swapping the seats for those with the armrest in it? I feel like a captain riding around in those. Greetings from Germany
So I bought a console at the junk yard to swap for my jump seat. I have a 2002 Silverado 2 door. My dash set-up was exactly like yours, 3 lighters and an ashtray. The jump seat came out exactly the same. But my new console is different from yours. Mine is a 2 piece. The front section bolts directly to the dash after I remove the plastic dash part under the lighters. 2 tabs up top, 2 screws in the bottom. Did not have to remove glove box or piece under steering wheel. BUT the back part of the console does not sit on a frame like the original jump seat or the console you have. It bolts to the floor with 4 bolts. I have not put that in yet because I want to see if the floor has the bolt holes. I can always drill some but want to check first. I guess there are two types of console?
Now you need to do an airbag switch relocation. I used an additional blank panel to fill the hole and just relocated the switch where I could access it from inside the glove box.
I have an 02 avalanche with the same interior. My advice is buy the bezel kit for a 2din. It snaps right up to your truck, or go with a 1din with a motorized screen. I don't like my 2din bezel but it could just be mine.
Looks good boss man, I did the exact same thing to mine. Got rid of the jump seat, but I dyed all panels and console to match the rest of the interior...the color of your interior is sem 17223 very dark Pewter look into it.
I tried 17113 Graphite it’s way to light, even tho the cap colors looks just like the interior color but the spray/liquid is not a perfect match. I looked up my rpo code interior color In the glove box right above or next to the paint code ,cross Referenced it and it came up as very dark pewter..
Looks really good 👍 At 1st I didn't think it would but it does. My truck is a 02 single cab I just put in the 2 peace console in it. But after this I might have to switch lol. Keep up the good work.
Damn $100!!! That’s a steal, here in St. Louis people want $250 just for the console. I have the same color interior ( the grey) and the 2 time looks great!! I may do the same. I’m at the salvage yard a lot, if you need anything let me know
Looks great just got a parts Tahoe today taking parts off it to put on mine n was wander if you knew would a 03 steering wheel fit a 02 wanting the newer wheel in mine
Getting set to add some graphite power seats that came out of an 02 or 03 Tahoe and a graphite 2 piece console out of a 00 Silverado/GMC into my 00 Silverado Stepside with graphite interior. You made it look so easy, I hope it will be for me. One question, on the 2 piece console, should I attached the part that connects up to the dash first, then attach the other larger piece or is it better to install the full console?
If I have a 2004 Chevy do I have to buy a lower steering column that came with the center console or I can use the same since it’s a 2004 not a 2002 and under
I like it. But I think the gray triangle pieces really make the new lower pop. I did around my suburban bezel with metallic gray. Where the black goes around the radio and heat controls then around gauges. I think it would really help with yours. Maybe the seats the other way around. With the lighter colors outside. Like the CTS seats. Just something to think about. But then one up the CTS with the face of the head rest light the sides and back dark. Maybe embroidery in a SS logo into the head rest.
id definitely say im late to these comments lol im trying to round up all the pieces for this "swap." What is that little bracket thing called that you screw the two 10mm bolts into. The piece that you said you have to drill a hole for on some trucks. I cannot find one anywhere
You know how there were originally 3 charging ports. And now you changed it to 2 ports. What did you do with the extra wire did you leave it alone or connect to something else????
How do you get your interior plastic panels to look so nice and almost like they have a dull shine to them? What cleaner do you use on them or is it a dressing?
Great video, you showed way more than the others. I am about to do this myself. So is it possible to re-use my original glove box? Can I cut off the lighter section? How about the part under the steering wheel? how much will I need to cut?
@@TWAMotorsports Thanks, I'm going to pick up the console from the junk yard. i will get the other two dash pieces also. Ever put in an overhead console in a regular cab truck that didn't have one?
Good video! And thanks for the links. On eBay now there is an 03-06 Yukon/Tahoe console set. Looks exactly like yours. Do you know if that 03-06 will fit 99-02 body style?
Can I just add the console without swapping glovebox and knee bolster??? Or did you just change to have all matching??? Or will console adapt to my existing glovebox and bolster??
I just found your page and as I'm restoring my dads 2000 GMC Sierra 4x4 you answer a lot of questions I have on things I want to do. My only thing is you mentioned in this video putting a new dash pad in but I didn't see a video on your page of you doing it. Have you done it yet? Or what company do you recommend? Mine is cracked pretty bad in several locations.
Well now when you do the 5.3 in it you'll need to do a new column that doesn't have the gear selector and put a shifter in the console. If you haven't seen that man it looks freaking killer.
Wow - just purchased an 04 1500 silverado and have debated if this was possible, came across this video and mindblown how good it looks and honestly, how easy it looks! Thanks for sharing I appreciate it. Out of curiosity, did you ever come across a black/grey trim one?
@@TWAMotorsports browsed some of your most recent videos & you made a good choice... looks really good w/the other parts in that lighter color! Love the channel man, excites me as i begin to build out my 04!
One of the best GM DIY channels out there - really appreciate your work my friend! Did the same swap on my RCSB several years ago but included the matching AC/heat vents, the side panels (that you mentioned) and swapped out the handle above the glove box with a leather one. Found a Birchwood dash bezel, and then one of the long overhead consoles to match! All for under $200. Completely transformed the interior. Again, great work and super nice truck!!!
Thank you. Sounds like a nice set up and a great price.
Wire in an inverter, and put a 110 outlet in the rear of the console. Add USB ports as well.
Now that's an idea.
@@TWAMotorsports boost auto parts makes wireless charging pad the fit in the top of the console lid. Definitely something to consider
O yeah that !!!!! 🤘🏼
I appreciate your videos . Finally someone that understands how it feels to have attention to details.
Thank you. A little ocd here
Agree 100%
This has to be my fav RUclips channel it’s full of GM content and DIY vids 😎😎😎😎
Thank you
Man leather seats that match would look wicked!
Someday that will happen
Definitely am liking the two-tone much swap much better! Bummer bout the scratch... but you'll get around it! Keep On stoke'n! Ouuwee looking good!)
Thank you
I really liked the swap you did I might be late in seeing this but the flow dude goes good, kudos to ya I like different!
Thank you
Thanks to the purchase of my 02 Tahoe I stumbled o ur channel n I’m loving it...... great content bro thanks for all u do to teach us all the tricks 👍👍👍
Thank you. Glad I could help.
Did a center console swap didn’t find another good video then yours came back to look at it helped me a lot 👍🏻
Thank you. Glad I could help
I did this swap with my crew cab sierra 2 weeks ago. Love it, defenetly like having those cup holders instead of jump seat.
Yeah I totally agree
You are quickly becoming one of my favorite channels!
Thank you
LIFE SAVER , learning so much from you.. becoming of my fav RUclipsrs
Thank you
Wow! That console and lower trim looks amazing! Well done utilizing items from the GM parts bin, and at a great price! That looks really sharp, Travis. And yeah, finishing touches will bring it together. But, great vision of the end result. I can see it in my minds eye. I would have never though about this. Well done! Keep up the great content!!!
Thank you. I really like it now that its finished.
I've been binge-watching I know I seen this episode before interior cleaning and two tone interior looks great
👍
Truck is KILLER CLean ( even before you started the console swap)
Thank you
Great video! I have a base model 2005 Silverado single cab that was originally my grandfather’s last farm truck. I’m slowly making it mine, one option at a time. I’m hoping to do the full console conversion next. I’m lucky enough that my nephew has a 2005 Silverado extended cab with one and he may want the fold down center seat that I’ve already bought. It’s going to be difficult to wait for Spring of 2024 to get the console, or maybe not. I’m not positive, but I think the interiors of our trucks are even the same colors. I hope so, because if not, he might be turned off of the plan.
My truck also has the manual locks and roll up windows. That’s okay with me. I can still someday get the door panels covered with vinyl or leather for a different look. I also have the black vinyl floor in my truck, but it’s in practically perfect condition and the carpet isn’t worth the hassle of getting it. All I’ve changed so far in the interior is getting the white-faced SS gauge cluster with blue LED backlighting. I love it.
Videos like this one are very educational and helpful for me. It’s just crazy how easy it looks to do. If it were up to me, we would get this done on a nice day soon. But Nephew is the one who decides when, or if.
You showed me how, said which size tool to use, where the bolts or nuts or clasps are, and went through the process with great advice and instructions. Thanks again.
Thank you for the comments. Good luck on yours
My 04 is Tan with that stupid jump seat. I've had it 3 weeks and no console is making me crazy!! Man it looks good I'm only doing that console after this vid mine is all tan with vinyl floor
That will look good
I’m building a shortbed 2wd also and did the same thing. Had a wrecked parts Tahoe I took and made mine 2 toned identical to yours and added console
I like it.
I personally like the tan interior in the dark green trucks looking great man keep up the good work
This isn't tan though I don't mind the tan.
That really brings back memories of my 2006 Chevy I bought new, It was a Regency Badlander conversion 4 x 4 white with gray interior it also had carbon fiber trim pieces with a silver and red instrument cluster look cool at night when the light were on keep up the good work love your videos.
Thank you
Finally got my 00 silverado and ur truck is inspiring truck been cleaning ships out of it fixing a bunch of broker parts..got lucky it came with a 5.3 n power windows, and lowered.
It's nice when they come with some stuff already done
Good thing u have the patience, and knowledge, and tools to do everything...I'll post a video in future
@@TWAMotorsports do u know why the door moves when hits dip, pot hole, bump
I swapped the escalade woodgrain into my 04 denali xl that had the silver graphite in it. Door panels, dash pad, center console pieces with clock and flip out ash tray, woodgrain steering wheel (spray dyed the air bag), gauge cluster and dash bezel. Also got the 07 caddy 22's and some gmc caps for them. Still have to install the stainless roof rack. I like the little touches of the escalade. But I dont want drive one. Plus the dished pistons on this U vin 6.0 make great compression with a 799 head swap.
Yeah the Escalade interior is a little much for me. I wanted a more clean and simple look.
@@TWAMotorsports That's exactly what a chevy is for. I cant wait to have this baby running 500 plus all the amenities. Lol
I had the same dark interior. I swapped to light gray electric leather seats, bottom dash, kick panels and electric door panels. Looks great. Panels are light gray with light tan arm rest. Looking at doing the arm rest charcoal. Keep up the good work. Headliner was already light gray match’s perfect.
Sounds like a nice setup.
Looks good. I also did this with my sons 2500 HD Silverado and added the power seats from a Tahoe. The light grey seats really look so much better with the two tone grey.
Thank you
Two-tone looks good. I did my swap a couple months ago and scored a complete dark charcoal console at a pick n pull style salvage yard for $16. Its amazing how heavy they are with sub, amp and radio controls.
Thank you. They are heavy with all that.
a good upholstery shop can fill those holes in the knee bolster and redye the plastic. Also, GM sells the push pin fasteners that you need for the front of your console where those holes are in the correct color.
Thank you
Can you make a video explaining how to install the overhead console on a regular cab that didn’t have that before?
Already did. Video is on the channel
Awesome job bud! I think it pops with the color of the truck...any color other than green I dont think I would like it as much. Keep up the good work and attention to detail...as always you rock!
Thank you very much
Never tough that it would look that nice, i put a console on my truck aswell but i end up painting everything black, btw your tryck is becoming one of simple but sick trucks in youtube
Thank you
On these base model trucks I always add the black plastic cover under the passenger side of the dash, cleans up the look a lot. Although this is a dumb time to mention this as you would have to take the console back out to install it.
I noticed it didn't have one
I just did this exact same mod a few weeks back!! I love it! I also swapped my seats for leather seats. Nice work Travis, the truck looks great!
Thank you. Seats will come soon
Definitely interested in the power window mod. I have a complete Tahoe donor and would like to move everything over. And of coarse, the 5.3 is getting moved to the truck! Bye bye 4.3
Hopefully I will do that eventually
That two tone looks good in there ....once u do the seats and door panels two tone ,it's really gonna set it off .👍🏿👍🏿👍🏿👍🏿...the interior is really clean....
Thank you. Yeah I am always looking for parts
Looks good, I had my seats redone in black outside and light gray center leather
Thank you
Nice job! I have a 2000 gmc sierra. Could I use the glovebox and knee panel that’s in the truck now? Seems like I can cut out the parts that doesn’t fit. I know it’s been awhile since this video but, I really want to know. Thanks!
No on glove box surround but maybe on knee panel.
Your missing the lower dash vent cover. Need to get one. Cleans up under the dash so nice.
I do need that
Turned out awesome - as always.
Have you thought about swapping the seats for those with the armrest in it? I feel like a captain riding around in those. Greetings from Germany
If I find a set of seats I may do that. Be safe over there.
So I bought a console at the junk yard to swap for my jump seat. I have a 2002 Silverado 2 door. My dash set-up was exactly like yours, 3 lighters and an ashtray. The jump seat came out exactly the same. But my new console is different from yours. Mine is a 2 piece. The front section bolts directly to the dash after I remove the plastic dash part under the lighters. 2 tabs up top, 2 screws in the bottom. Did not have to remove glove box or piece under steering wheel. BUT the back part of the console does not sit on a frame like the original jump seat or the console you have. It bolts to the floor with 4 bolts. I have not put that in yet because I want to see if the floor has the bolt holes. I can always drill some but want to check first. I guess there are two types of console?
Yes I did the 03 up. You bought the 99-02
@@TWAMotorsports LOL that would explain it. Strange though that my jump seat had the frame that bolts under the seats but the console doesn't.
They generally don't
Now you need to do an airbag switch relocation. I used an additional blank panel to fill the hole and just relocated the switch where I could access it from inside the glove box.
I may be changing things up.
Looks good. I agree on the seats need some work. I like the grab handle on the dash. Power Window Please.
Thank you. Power windows will come eventually
What sort of a drop kit do you have on there? Love your truck and I’ve been thinking about doing this with mine.
All parts listed in video description. 5/7
I have an 02 avalanche with the same interior. My advice is buy the bezel kit for a 2din. It snaps right up to your truck, or go with a 1din with a motorized screen. I don't like my 2din bezel but it could just be mine.
What bezel do you have?
Its a installation kit. Its a full bezel. You can find them on ebay. Its made for the 2002 and older GM's. Way better then hacking up your dash.
So the bezel 03-07 classic is a direct fit for the 99-02 ? I know the bezel is perfect for double dins and the 99-02 would need some trimming
Looks good boss man, I did the exact same thing to mine. Got rid of the jump seat, but I dyed all panels and console to match the rest of the interior...the color of your interior is sem 17223 very dark Pewter look into it.
Someone said 17113 was the color
I tried 17113 Graphite it’s way to light, even tho the cap colors looks just like the interior color but the spray/liquid is not a perfect match. I looked up my rpo code interior color In the glove box right above or next to the paint code ,cross Referenced it and it came up as very dark pewter..
Im in the middle of the same swap! I decide to vinyl dye/paint mine so it all matches. One point is to buy local, save yourself $400+
I agree they are way cheaper in a junk yard.
Looks really good 👍 At 1st I didn't think it would but it does. My truck is a 02 single cab I just put in the 2 peace console in it. But after this I might have to switch lol. Keep up the good work.
Thank you. Yeah I just like the newer style better
Damn $100!!! That’s a steal, here in St. Louis people want $250 just for the console. I have the same color interior ( the grey) and the 2 time looks great!! I may do the same. I’m at the salvage yard a lot, if you need anything let me know
Thank you. I used to know an eric meyers
TWA Motorsports it’s so funny cause the last time you replied to My comment you told me the same thing lol
@@05blkrado lol
Looks great just got a parts Tahoe today taking parts off it to put on mine n was wander if you knew would a 03 steering wheel fit a 02 wanting the newer wheel in mine
Steering wheel will not fit. Splines are different
Did this have the ash trey right beside the cigarette chargers ? Just trying to make sure this will work on my 02 Tahoe
It did
Getting set to add some graphite power seats that came out of an 02 or 03 Tahoe and a graphite 2 piece console out of a 00 Silverado/GMC into my 00 Silverado Stepside with graphite interior. You made it look so easy, I hope it will be for me. One question, on the 2 piece console, should I attached the part that connects up to the dash first, then attach the other larger piece or is it better to install the full console?
Yes dash part then rear part
This is also a swap I wanted to do! Awesome! That said I'm gonna keep a bench seat. Something about arm and arm with my girl is just right
New love lol
My dad has a 08 extended cab Silverado and I always wondered why it has a two tone interior
That's why
Question??? I have a 2001 chevy silverado regular cab you think fits one of those console 🙂
Yes.
For the next move you should do a conversion of electric doors
It will happen but not next
Why do you need to change the glove box?and the part under the steering wheel?to put center console?
Wont line up
If I have a 2004 Chevy do I have to buy a lower steering column that came with the center console or I can use the same since it’s a 2004 not a 2002 and under
Think you can get by with stock one if I remember correctly
Nice work man! Any idea what that plastic front attachment piece is or where to find it? Thanks.
Salvage yard is your best bet
you should get a 03 and up steering wheel for your truck
Don't love those.
I like it. But I think the gray triangle pieces really make the new lower pop. I did around my suburban bezel with metallic gray. Where the black goes around the radio and heat controls then around gauges. I think it would really help with yours. Maybe the seats the other way around. With the lighter colors outside. Like the CTS seats. Just something to think about. But then one up the CTS with the face of the head rest light the sides and back dark. Maybe embroidery in a SS logo into the head rest.
Yeah I have the triangle parts now. I will do an update video soon.
Is the dashboard bezel from the donor car or is it the original one from the green truck?
@user-vy6qy7fr5mstock dash
id definitely say im late to these comments lol im trying to round up all the pieces for this "swap." What is that little bracket thing called that you screw the two 10mm bolts into. The piece that you said you have to drill a hole for on some trucks. I cannot find one anywhere
Not sure what it's called but they are tough to find.
Gotta love that 03-06 center console more than the 99-02
Way better looking
You know how there were originally 3 charging ports. And now you changed it to 2 ports. What did you do with the extra wire did you leave it alone or connect to something else????
They unclip so you can just do 2
I have a 2000 Chevy with back interior, and I don't like the center consoles for that body style. What other year console will work?
99-07. Others can but look odd to me.
I have the middle console that dies not fold down. How would I fix it to fold down or would I have to replace the whole thing?
Have to replace it
Where do you get the middle back mounting plate you said was needed to install
From the donor truck
The dual tone 99-02 denali seat would look 👌🏼
I agree
It looks freaking great. That's a custom two tone.
Thank you
I just realized I just bought a console from you and dash pieces from you. I knew I recognized you.😂
Lol. I told you I made RUclips videos.
TWA Motorsports I knew you looked familiar just wasn’t sure at first
You can use dupli color paint to match
Not a fan of that
Should install the wireless charging pad on the top of the console lid from boost auto parts
I may down the road
I have an extra cover for under the steering wheel with no holes in the same tan color if you are still looking for one
This is actually light gray and I found one. Thank you though
Nicely done, I like the console. You'll probably miss having an arm rest. My 01 Silverado has one and power windows. I'm glad to have a cool project.
Thank you. I use it as an arm rest
Same console in my old 04 Silverado. The leather seats had fold down arm rests. Maybe get some seats like that.
How do you get your interior plastic panels to look so nice and almost like they have a dull shine to them? What cleaner do you use on them or is it a dressing?
Silk shine from chemical guys
Awesome, Thank you!@@TWAMotorsports
@NewYorkCity646 you're welcome
The older style door panels are 2 tone on the lt tahoes and lighter seats would make it match
Yeah I actually bought some but they are junk
Great video, you showed way more than the others. I am about to do this myself. So is it possible to re-use my original glove box? Can I cut off the lighter section? How about the part under the steering wheel? how much will I need to cut?
You can cut but it looks terrible
@@TWAMotorsports Thanks, I'm going to pick up the console from the junk yard. i will get the other two dash pieces also. Ever put in an overhead console in a regular cab truck that didn't have one?
I haven't but would like to
Am i able to do a center console swap from an 02 escape to an 06 Silverado? Looks like the same dash set up.
I doubt it will set right
How much purple power do you use in the cleaning machine?
I didn't put it in the machine
Have you ever thought about doing the 03-07 steering wheel on this truck
Different splines
I have an 05 Silverado I would like to install that exact console in so could you tell me what year you used in your truck
Said that in the video. 2003 to 2007 classic
Good video! And thanks for the links. On eBay now there is an 03-06 Yukon/Tahoe console set. Looks exactly like yours. Do you know if that 03-06 will fit 99-02 body style?
It will fit. That is what I used here on my 2002
Can you buy the center piece that connects the console to the dash? Do you have a part number?
No it is discontinued
Bro you make the most detailed vids
Thank you
Can I just add the console without swapping glovebox and knee bolster??? Or did you just change to have all matching??? Or will console adapt to my existing glovebox and bolster??
Need to swap all for color reasons and glove box for fitment
Thanks for the info, that helps out a lot.
You're welcome
Do you know how to do the power window swap , like a video or something
It will come at some point
Damn I regret replacing my lid bc I can't find a handle 😅 wish I seen this sooner. Thanks for the video
Glad I could help
I just found your page and as I'm restoring my dads 2000 GMC Sierra 4x4 you answer a lot of questions I have on things I want to do. My only thing is you mentioned in this video putting a new dash pad in but I didn't see a video on your page of you doing it. Have you done it yet? Or what company do you recommend? Mine is cracked pretty bad in several locations.
I don't like aftermarket ones. Try to find a good one in a salvage yard honestly
I’m trying to find one like you took out.
Good luck
so this console from 2003 and newer works on the 2002 tahoe? i have the 3 seats in front, i want the center console.
Yes
Denali leather seats already come with the tan/grey combo so they will look clean on this truck
No tan in this truck. I will do seats though
Do you know if that center console fits a 99-02 Silverado?
Yes. This is an 02
Well now when you do the 5.3 in it you'll need to do a new column that doesn't have the gear selector and put a shifter in the console. If you haven't seen that man it looks freaking killer.
I have seen that but doubt I will go that far
@@TWAMotorsports be a lot cooler if you did 😎
Hey Travis what are you doing with the old middle seat. I’m trying to find one just like that for my Silverado.. thanks
Its sold already
Get the double din kit off eBay it’ll be easier. The 99-02 Hvac controls don’t fit in the 03-06 bucket and surround
Thanks for that info
Wow - just purchased an 04 1500 silverado and have debated if this was possible, came across this video and mindblown how good it looks and honestly, how easy it looks! Thanks for sharing I appreciate it. Out of curiosity, did you ever come across a black/grey trim one?
Thank you. No I liked the contrast. Dark gray from 03 up doesn't match well in 99-02
@@TWAMotorsports browsed some of your most recent videos & you made a good choice... looks really good w/the other parts in that lighter color! Love the channel man, excites me as i begin to build out my 04!
Thank you. Good luck on yours
Yessir....not bad at all..damn good job
Thank you
Hey Travis how about a set of katzkin leather seat covers that are two tone to match?
I will explain later why I don't think that will work.
I wonder if there’s a console that works well for my 2000 4.8 5 speed
Not without modifications
What % tint on front windows and Rear thanks in advance, nice truck!!!
35% whole Windshield. 5% everywhere else
Thank you!
@@carlitosaguirre7347 you're welcome
Now I want to add a center console to my 2003 extended cab Silverado
Do it.
TWA Motorsports I’m assuming I would have to find one without the rear ac controls on the back?
No you don't have to
TWA Motorsports ok. I would just have non functioning air vents in the back?
Guessing those center consoles don’t work when you have the 4x4 lever on the center flooring ?? 😞
Have to be cut to do them. Guy online makes an extension I think
Nice job the inside looks good
Thank you
Do you have recommendations on removing the film on a dash? I have spots peeling and its black and nicer underneath the tan
I'm not sure the best way to stripe it without ruining. Maybe a power washer
@@TWAMotorsports thank you for the response ill try that!
You're welcome. Let me know how it comes out.
Usually people use a power washer if you remove it from the truck. And should come right off.