Rob Dahm came here to say the same thing. You could release a final model, so content creators can put it in games like GTA V, or in sim racers like Assetto corsa or Rfactor2.
I love that you have almost four hundred thousand people subscribed to you, yet I still see you in the comments liking and replying to everyone. You sir are a beast Mr Dahm.
That’s my favorite part honestly. It’s not a one way communication medium. People say some funny shit in the comments. It shows my twisted sense of humor haha
On the off chance Rob reads comments, I could probably take the model and set it up to be used in GTA n such. I don't know if I could be assed to texture it though.. Would probably be easier to edit an existing rx7 model. Why do I post these things
Cant wait to see the finished product. The car is gonna be wicked. I love rotaries just hadnt had the pleasure of owning one.... yet ! Keep making vids and ill keep watching
Im loving what rob is doing! Hes taking that drawing you used to do in the back page of your maths book and making it a reality! Hes just a big 10 year old and i love it!
Once all the car is setup and working you should seriously share the car model online, would love to see someone bring this to a game like Assetto Corsa!
What’s the plan for the fenders? Where you lowered it and cut the fenders the tires aren’t covered anymore, are you going to correct that in the model before making the mold or are you going to have a separate piece that goes on the fenders?
It’s barely held on to the car now. We have to make a version that can drive. I’m doing this and the rear suspension while abel works on the engine. I wish he could have the machinist work faster but it is what it is. Finally not waiting on me
Its not the scanner, its the users. I work in a college machine shop and the new users seems to create very blobby shapes and it seems to get much better with a little practice. Thanks for the concern though, wonderful customer support. It is the Thayer School machine shop.
This channel gives me hope that one Day i can build a 3 rotor AWD RX7 FC... God bless this build and godbless everyone involved, Top notch work from Top notch people.
Looks amazing! Rob, pretty please, can we have the final model for download sometime in the future? Also wish if you would do more scale models of the 4Rotor, not only for the patrons on Patreon.
Rob how much did it cost to 3D scan the RX7? I own an RX7 and I do my own carbon fiber parts by replicating parts into fiberglass molds or create a brand new part from scratch. Needless to say it’s extremely time consuming...this would definitely help my quest to build one of the best FD’s. The info will be greatly appreciated. 🤙🏽
Hello Rob, I love these computer aided tools. What I have seen and know by "body kits" developed on the same principle.....they never fit properly and always need rework. How accurate will the end result be with these latest version lazer scanners? (we have the metric unit system).
8:13 We learned how the computer calculates the area in Engineering Maths 2 ...The chapter is called " Directional Derivatives ". this technology is known to be ancient Egyptian.
Jay Leno has his own scanner and 3d printer. I would love to see this technology getting used more, especially the 3d printer that's super fast and builds as pull the plate or of the glue
Creaform makes a variety of units. We chose this one because it’s more affordable than the unit that can get it done in 5 minutes. This one is often bought by engineering firms and schools. I will be showing off a 6k unit next to scan the engine bay etc
I don't think I had the chance to work on 3D scans built using Creaform scanners but I was wondering if you compared the dimensions of the car and the 3d data ? I have had quite bad experiences working on 3d scans made with small hand held unit (stretched and twisted meshes) . Good to see this type of technology used on project like yours !
Hello...Creaform scanners provide you with quality mesh data with a volumetric accuracy of 0.0012in. The quality of the scan data can also be seen in the video. If needed we can also prove our accuracy specs using lab certified artefacts.
Personally i'd get rid of the spoiler and make the gas cap flush with the fender. Those make it look more like just a tuner car than an over the top clean build to me. But hey, not my car or money!
Robs next video: We 4D scan the 3 Rotor
Next: 4 Rotor Giveaway!
How's the v12 miata?
Car Porn films but does it run? 🤔
Wraithmeda Berry my v12 Miata is atleast further than Dahms 4 Rotor. P.S Rob is handsome-Handsome Rob #nohomo
Nay Cee you talking about my V12 Miata?
You have the 3D model now...
_Turn10 Studios,_ you know what to do.
Brodie Bennett forza horizon 3 has a rocket bunny kit
It's not just rocket bunny lol it's lengthened
will you upload the 3d model for everyone so that people can create a mod out of it to use in various racing games and racing simulators? :P
*opens BeamNg Drive*
That’s a cool thought. I would consider it with the final model for sure.
Or so I could print a 3D model of your car :) pretty plz
Rob Dahm came here to say the same thing. You could release a final model, so content creators can put it in games like GTA V, or in sim racers like Assetto corsa or Rfactor2.
4 rotor in assetto corsa. That would be so great.
I love that you have almost four hundred thousand people subscribed to you, yet I still see you in the comments liking and replying to everyone. You sir are a beast Mr Dahm.
That’s my favorite part honestly. It’s not a one way communication medium. People say some funny shit in the comments. It shows my twisted sense of humor haha
I can’t wait until I can illegally download the four rotor
lol awesome. just seed it so i can as well.
preach
*You wouldn't download a car*
Meanwhile : **zipties his cars bumper until he buys a new one**
That ride is gonna be wicked tho cant wait to hear it
Mawashi-geri where my 10bitch
Does this mean you can make sell die cast models now? Might be cool and help raise funds for the build....
shelby boytchuk he is but for patrons only
"The depraved souls in the RX-7 Argument Group on FB" thanks for the shout out bro lol
Thanks for el cuatro Dorito video Roberto. Love ya alpha Rob. 😘
On the off chance Rob reads comments, I could probably take the model and set it up to be used in GTA n such. I don't know if I could be assed to texture it though.. Would probably be easier to edit an existing rx7 model. Why do I post these things
Nice little Above & Beyond shoutout. A small faction of your fans really appreciated that.
5:05 His sock game is on point!
hahahaha thanks
That 3d imagine is crisp but not as crisp as your jawline dad
WHERE IS THE 4-ROTO... Oh wait there it is 😀😂
Rob with what I know of You, I can only guess. This car is going to be 'Phenomenal' ! 👍😉❤
Cant wait to see the finished product. The car is gonna be wicked. I love rotaries just hadnt had the pleasure of owning one.... yet ! Keep making vids and ill keep watching
Dude!!!! That thing needs a huge rear splitter like the centanario
Rob thank you for sharing this, it is seriously cool.
Im loving what rob is doing! Hes taking that drawing you used to do in the back page of your maths book and making it a reality! Hes just a big 10 year old and i love it!
now you can 3d print as many rx7s as you want
Rob do you still eat ketchup or you stocked up your fridge XD
Rob Spaghetti owns a tow truck... always one step behind the Spaghet...
BEST BUILD IN RUclips
Gratulations man. It's really cool to see how your car is coming along
Awesome videos, greetings from Germany
Great video and model! How much cost one service like this?
Once all the car is setup and working you should seriously share the car model online, would love to see someone bring this to a game like Assetto Corsa!
Skreamies yea
This was cool to see. Thanks for sharing!
seriously amazing video, both guys nailed it.
What’s the plan for the fenders? Where you lowered it and cut the fenders the tires aren’t covered anymore, are you going to correct that in the model before making the mold or are you going to have a separate piece that goes on the fenders?
yay! can't wait for next time!
Can't wait for a rev of the 4 rotor
above and beyond rob you have nice taste in music
It'd be cool to drive the 4 rotor in Gran Turismo or Project Cars & now that it's 3D scanned we're 1/2 way there !
Jay Pase you mean forza.
Forza too .... woops I meant Forza 3 !
would be much easier to implement it into Assetto Corsa as you wouldn't need developer support
I can’t wait to hear it
3d scanning is so much fun, I haven't done anything that big though , cool to see it used in a properly useful way
Awesome to see the process. Hopefully you can catch video throughout the manufacturing process of the carbon fiber parts.
Hi Rob - What did it cost to nave the RX7 scanned?
You're a legend!! Love your builds!!
Can't wait to see this thing done! We hope that it makes it to SEMA again this year!
Why spend so much money and effort in building the looks now? Get it running and then take on the outside? It looks already crazy at the moment.
It’s barely held on to the car now. We have to make a version that can drive. I’m doing this and the rear suspension while abel works on the engine. I wish he could have the machinist work faster but it is what it is. Finally not waiting on me
What's the point in 3-D scanned if it doesn't move under its own power?
Ash Harding to build the body panels, the car is going to be a carbon fibre mold this is just a aluminium prototype
Very nice work !
That's sweet. I'm gonna buy one of those scanners from ebay for $34.99. Should be comparable right?
blindabinda123 she’ll perform.
Great educational video!
I Tried to get into the argument group on fb so thanks for the shout out
So high tech / neat stuff!
I really like the color
These guys are good! We have an older version of that scanner at work and it doesn't work nearly as well.
Hi Max, what's your email? I'd like to find out why your system is not working well and make sure we fix that.
Its not the scanner, its the users. I work in a college machine shop and the new users seems to create very blobby shapes and it seems to get much better with a little practice. Thanks for the concern though, wonderful customer support. It is the Thayer School machine shop.
I hope this car becomes an unlockable or special hidden car in a video game one day!
what does it cost to have the car scanned?
Love your channel rob
Rob confirmed Above & Beyond fan
This is awesome!
This channel gives me hope that one Day i can build a 3 rotor AWD RX7 FC... God bless this build and godbless everyone involved, Top notch work from Top notch people.
wootz RX 7 .. insta subscribed!!
Looks amazing! Rob, pretty please, can we have the final model for download sometime in the future? Also wish if you would do more scale models of the 4Rotor, not only for the patrons on Patreon.
Where's the 4-Ro-... oh there it is
Dies cast 4 rotor merch ;)
You know you love me for this idea XD
I want that file and a few measurements to put this car in assetto corsa lol
Would a normally sunny day have upset the scanner and forced you inside?
Rob how much did it cost to 3D scan the RX7? I own an RX7 and I do my own carbon fiber parts by replicating parts into fiberglass molds or create a brand new part from scratch. Needless to say it’s extremely time consuming...this would definitely help my quest to build one of the best FD’s. The info will be greatly appreciated. 🤙🏽
Hello Rob,
I love these computer aided tools.
What I have seen and know by "body kits" developed on the same principle.....they never fit properly and always need rework.
How accurate will the end result be with these latest version lazer scanners? (we have the metric unit system).
How many lamborghinis could you have bought with the money you put on that Mazda ?
Love your show BTW. You're the only car vlog I watch now.
what is the spray that he applied to the reflective surface?
When is the next 4 rotary going to be up
Are you gonna have download link to the 3d model? I wanna put it in Assetto Corsa... IMA car modder 😁
The reflection of the reflectivity reflects the reflection... thanks cleared that up
8:13 We learned how the computer calculates the area in Engineering Maths 2 ...The chapter is called " Directional Derivatives ". this technology is known to be ancient Egyptian.
That's nuts
thats why spagetti is the alpha rob, he doesnt need to call a tow truck.
I never found the RX-7 to be an attractive car but DAMN, your car is damn good looking dude! :)
Will you ever post the file publicly? I have a 3-D printer and I think it would be fun to print out the 4 rotor.
Nice! Is this how 3d models are created for video games?
I give a like cause you put my fav song in it.. lol
Jay Leno has his own scanner and 3d printer. I would love to see this technology getting used more, especially the 3d printer that's super fast and builds as pull the plate or of the glue
Very cool
Looks amazing, but why didn't you wait until the front fenders were finished?
rotary in the Honda? XD
For them gallons per mile
eyyyy
Where's the 3 cylinder at?
(the insight)
Where u get 3d scan I need scan my 350z and how much cost?
would it be possible to release the scan, id like to 3d print a keychain
robs morning face. wake up!
The amount of 4 rotor content scares me o.o
Rob SMOKES PINK CIGARS!!
Where do you get one of those 3D mapping systems just curious probably would never afford one
Creaform makes a variety of units. We chose this one because it’s more affordable than the unit that can get it done in 5 minutes. This one is often bought by engineering firms and schools. I will be showing off a 6k unit next to scan the engine bay etc
I don't think I had the chance to work on 3D scans built using Creaform scanners but I was wondering if you compared the dimensions of the car and the 3d data ? I have had quite bad experiences working on 3d scans made with small hand held unit (stretched and twisted meshes) .
Good to see this type of technology used on project like yours !
Hello...Creaform scanners provide you with quality mesh data with a volumetric accuracy of 0.0012in. The quality of the scan data can also be seen in the video. If needed we can also prove our accuracy specs using lab certified artefacts.
sick method rob, i thought you would use the xbox Kinect.
it would be cool if we could download the 3d model. i would love to have some fun with it
Have you ever thought of making your rx7 look like the Mazda RX-Vision?
I wonder if it would be possible to scan an accurate scaled toy replica and then supersize to the correct proportions.
In this episode, Rob Spaghetti gets arrested for 3D scanning his spaghetti stalk and meatballs
Do you have an estimated date on when it will be done
Connor Antram two weeks
Holy shit, this is seriously incredible haha
Should be runnin in the next couple days
That Thing Is Proper 😁
how much $$$ will the carbon fiber body cost?
Personally i'd get rid of the spoiler and make the gas cap flush with the fender. Those make it look more like just a tuner car than an over the top clean build to me. But hey, not my car or money!
Damn rob, I'm surprised you didn't go with a veilside fortune widebody for the 4 rotor
That turbo is 99% of the damn engine bay 😂
post the file so i can 3D print it!