This list is pretty spot on! At the moment I own a Hardtop, OEM Navpod and the Stage 2 wing. The wing gives the car a nice look with the OEM lip kit! Otherwise it looks tacky
I actually forgot to mention but I have a exhaust on it, it doesn’t look amazing but it sounds incredible, it makes a low note and like a gurgling noise and it’s great. I don’t know what it is because it is from my brothers old mrs before he wrecked it. Either way, it sounds great.
I imported a JDM 05’ Spyder which came with the full TRD Bracing kit (exact ones you mentioned) and a trd lowering springs with sway bars. Also has a 6spd manual which the facelift in Japan got.
The Spyder can outcorner the turbo SW20 by a lot. If you add a turbo to it, and it has a tiny body lighter than a Miata, then which one really is the best MR2?
Does anyone know the part name or where you can buy that side air intake duct shown at the start of the video. I've always loved them on the SW20 but didn't know they existed for the ZZW30.
2:00 Lul thanks for including my car :D Very good list! One Part I would add is what is visible on the first silver MR-S in the video, the TOM's hoodscoop. Super rare and simply amazing But I'd really appreciate to give credit to the creators of the videos :) for example @s_k_films who did the shots of my car and midship bobber with the TOM'S scoop, those are the ones I know
2:00 this is my clip, my video creation. It would be much appreciated if you could tag my channel or the original video in your description. Thank you!
I had a JDM factory exhaust. Someone ripped my hand off for it. Also brake light delete is rare if you have the factory spoiler. Which has the light on it.
today on list I will also add TTE parts like front bumper, rear bumper frames and fg. few models of wheels produced by borbet signed as TTE (as my memory is not fault)
I have a full TRD 05 grey spyder with Stage 1 and Stage 2 bumpers. Also a car ordered new with a TRD stage 2 yellow 03. All of the parts are getting expensive but maybe not rare. Of all the parts on the my car the Stage 1 front skirt was the most difficult to find especially in good non damaged condition. The TRD cat is super rare. I have only seen a couple for sale on the Yahoo Japan site. I liked the video. There are lots of other parts that are hard to find like all the TTE parts, turbo kit, TTE stage 2 bumper is rare in the US as are all the other TTE parts in the US since they were a Europe option for the Spyder. I hope you make more videos they are very well done. Thanks
It might be the least pretty of the MR2 series, but it's the best on track day. I'm not sure if you're familiar with TTE (Toyota Team Europe), but they had a few parts / options that are quite rare too, my MR2 has the TTE front bumper and exhaust, which really have become impossible to obtain, the TTE bumper also had front fog lights and the exhaust is a double exhaust. TTE also had a set of rings available for around the dials, unfortunately I don't have those yet. What TTE was most famous for though was their turbo kit, I also want one of those, in Europe you could opt for those TTE parts a when you bought the Spyder new at the dealer.
@@hakosan86 they're $200. I have one. I was about to print an entire center console but decided against it because I don't need it right now. printed plenty of parts for the car though. If you're talking about a printer that does metal then yes, but I don't even think those dash pods are made of metal anyway. Probably an abs plastic.
@@hakosan86 I would have to charge a little more for the time taken, I guess about 20 bucks plus the shipping. It would have to be in 2 pieces because my print bed isn't big enough and only out of pla because I don't have any abs filament. You could super glue and bondo the halves together and then paint it and it should be fine. I think I already have the file for it on my computer. If you're actually interested I wouldn't mind.
Sw20's are about the same price now, and the spyder is a better MR2
Yeah thats true now haha
This list is pretty spot on! At the moment I own a Hardtop, OEM Navpod and the Stage 2 wing. The wing gives the car a nice look with the OEM lip kit! Otherwise it looks tacky
Very true! Without the lip kit, it just looks out of place
Definitely my favourite wing 👌👌
Dang man I’m still sitting here with a stock mrs. but I guess that’s better than nothing
@@Micah_clark Stick a stainless exhaust set up on it... It'll make you smile 🤭
I actually forgot to mention but I have a exhaust on it, it doesn’t look amazing but it sounds incredible, it makes a low note and like a gurgling noise and it’s great. I don’t know what it is because it is from my brothers old mrs before he wrecked it. Either way, it sounds great.
I imported a JDM 05’ Spyder which came with the full TRD Bracing kit (exact ones you mentioned) and a trd lowering springs with sway bars. Also has a 6spd manual which the facelift in Japan got.
Nice man! Seems like a good buy
6spd with the stock 1zz???
@@IRLAsh Yes, the facelift in Japan (03’ - 07’) got a 6spd stock
@@theninethrees8044 Jesus fucking christ I had no idea 😳.
@@IRLAsh same with the facelift in the uk. plus we got LSD stock on both 5 and 6 speed
The Spyder can outcorner the turbo SW20 by a lot. If you add a turbo to it, and it has a tiny body lighter than a Miata, then which one really is the best MR2?
Does anyone know the part name or where you can buy that side air intake duct shown at the start of the video. I've always loved them on the SW20 but didn't know they existed for the ZZW30.
I got no clue but i agree with you! Its pretty sick!
Pretty sure it's part of Tom's widebody kit I think w123 was the name
2:00 Lul thanks for including my car :D
Very good list! One Part I would add is what is visible on the first silver MR-S in the video, the TOM's hoodscoop. Super rare and simply amazing
But I'd really appreciate to give credit to the creators of the videos :) for example @s_k_films who did the shots of my car and midship bobber with the TOM'S scoop, those are the ones I know
Yeah i love that hood scoop man! Ill include it!
This was a cool list. Didn't even know about some of these. I personally like the wing, but rather go with a legit track wing.
2:00 this is my clip, my video creation. It would be much appreciated if you could tag my channel or the original video in your description. Thank you!
Will do!
Its been added! Nice work man
@@hakosan86 Thanks a lot
Where’d you get the scoop on the back, and the aftermarket rearview mirror
Where can I get headlights assembly for it
I had a JDM factory exhaust. Someone ripped my hand off for it. Also brake light delete is rare if you have the factory spoiler. Which has the light on it.
today on list I will also add TTE parts like front bumper, rear bumper frames and fg. few models of wheels produced by borbet signed as TTE (as my memory is not fault)
where's the inlet-scoop???
I have a full TRD 05 grey spyder with Stage 1 and Stage 2 bumpers. Also a car ordered new with a TRD stage 2 yellow 03. All of the parts are getting expensive but maybe not rare. Of all the parts on the my car the Stage 1 front skirt was the most difficult to find especially in good non damaged condition. The TRD cat is super rare. I have only seen a couple for sale on the Yahoo Japan site. I liked the video. There are lots of other parts that are hard to find like all the TTE parts, turbo kit, TTE stage 2 bumper is rare in the US as are all the other TTE parts in the US since they were a Europe option for the Spyder. I hope you make more videos they are very well done. Thanks
Thanks you! I definitely will. Another Spyder owner wants me to do a video on his tte turbo mrs
Didnt TRD have a lowering set/ coilovers that you could get from factory?
Yeah they did have some lowering springs i think
It might be the least pretty of the MR2 series, but it's the best on track day.
I'm not sure if you're familiar with TTE (Toyota Team Europe), but they had a few parts / options that are quite rare too, my MR2 has the TTE front bumper and exhaust, which really have become impossible to obtain, the TTE bumper also had front fog lights and the exhaust is a double exhaust.
TTE also had a set of rings available for around the dials, unfortunately I don't have those yet.
What TTE was most famous for though was their turbo kit, I also want one of those, in Europe you could opt for those TTE parts a when you bought the Spyder new at the dealer.
Make a parts video on the toyota aristo jzs161
i have the the preface lift fogs on mine they look awesome
How much are these oldies ?
You forgot the TTE style front bumper…
Yeah i should have added that :/
These are starting to grow on me..
"Passenger airbag delete" 💀
Forgot the convertible top inserts to make it look flush across the back
Yeah ill include those if i make another!
I buy parts made for other cars and put them on my mr2
I love sti wings, that trd wing is the ugliest thing I’ve ever seen, almost as bad as the other oem wing that came on the spyder
Yeah i don’t like it either. Im more of a low spoiler type of guy.
Great information here.
I got the yellow rainbow frog-light. NEAT 1:28
Honda prelude 5th gen
That wing is hideous
I gave away my TRD strut brace hahaha it's pretty flimsy, I also have the under bracing and rear bracing
Dang man you got it all lol
the pod is like 2 dollars to print, if you own a printer.
Yeah printers are pretty pricey though so its pretty rare for someone to own one.
@@hakosan86 they're $200. I have one. I was about to print an entire center console but decided against it because I don't need it right now. printed plenty of parts for the car though. If you're talking about a printer that does metal then yes, but I don't even think those dash pods are made of metal anyway. Probably an abs plastic.
Oh thats sick. Could you make me one and i pay the $2 plus shipping?
@@hakosan86 I would have to charge a little more for the time taken, I guess about 20 bucks plus the shipping. It would have to be in 2 pieces because my print bed isn't big enough and only out of pla because I don't have any abs filament. You could super glue and bondo the halves together and then paint it and it should be fine. I think I already have the file for it on my computer. If you're actually interested I wouldn't mind.
That sounds awesome! Whats your insta?
The wing is sexy