Hello Arben, they are made of PVC but their terminals have wood and in the center they have a metal tube that is crossed with an iron from side to side
Very illustrative video! Thank you! Just some clarities: 1. On both extremities of the U profile: one has a U cut but how the yellow roller can rest in. Screws are there but I can't understand how the roller is hold not to fall. And at the other extremity what happened to the cuts made.
Each bearing has 2 bolts below that are tightened to the structure, to tighten the belt, you release them and you adjust the endless screw until you achieve the proper tension and then tighten the lower bolts to secure it, greetings
Great video, I have a question on the Blue rollers. Could you describe how these are constructed. I like the idea of using PVC to help keep the weight down for the conveyor I am building and would like to use your roller design.
Hi, pvc tubes and hardwood end tips crossed from side to side by a central metal tube inside the tube an iron that is affirmed on the sides of the structure, greetings.
Hola. Una pregunta técnica espero me la puedas resolver: al no tener el sistema de rodillos en V (que al parecer son mejores para transportar agregados) tuviste algún problema con la cinta en cuanto o a si sube bien el material, si se sale la arena por los bordes, si no se desalinea la cinta constantemente, etc. Gracias y Saludos desde México.
No para nada, lo único es que al cargar en la tolva, si es arena o algo parecido, ten el recaudo de poner una goma atrás para evitar que caiga al suelo, saludos
For a 20 foot long conveyor belt you need rubber at least 4mm thick. In rubber it is worth approximately 6 dollars per foot. I bought this one from a rubber band factory. Regards.
Excellent ... Sir... I'm searching how to make convey belt structure .. I'm lucky to watch video .. really I like it .. way of making I'm planning to make ..new conveyor belt ...flat I need ur help for technically ... Can u provide urs mail I'd.. or whatsapp number.. If I get ur support .. easily I can make it ..pls sir.. I'm from india .. Regarding my poultry I have to need conveyor .. I have
@@rodalo1636 Length 50 feet Width 1 feet Height from the floor 3 feet Flat conveyor belt ... Weight 150 kg (feed bags will go on that belt.. 1 bag weight 50kg ) Can u tell me ..which material required ...with Specification
i also build my own compressed earth block machine in india.. looking for best cheap method for conveyor belt.. you saved my days.. thanks man..
Tnaks tou you for watching
cutting the metal without shirt, LIKE A MAN!!! great!!
hahaha i just was saying the same ... dude is a bad ass
Like a man with lots of small burns...
Hi I was a very hot day, inside was a oven, greetings
Hi friend, was an very hot day like an oven
Where did you get the belt from? I am looking at making a similar project myself.
Bought in a rubber factory
Great job sir. I just wanted to ask for the rollers arent they a litle bit thinner or what.. i have a conveyor but the rollers are thiker thanks
Hello Arben, they are made of PVC but their terminals have wood and in the center they have a metal tube that is crossed with an iron from side to side
Thanks
Hi, nice diy video, what kind of bearing do you use for small rollers (pvc pipe)?
Yes pvc pipe
Great job, I'm doing something similar on a much smaller scale.
Thank you for the video
Thanks
What was the overall cost of making it- per meter?
Very illustrative video! Thank you! Just some clarities: 1. On both extremities of the U profile: one has a U cut but how the yellow roller can rest in. Screws are there but I can't understand how the roller is hold not to fall. And at the other extremity what happened to the cuts made.
Each bearing has 2 bolts below that are tightened to the structure, to tighten the belt, you release them and you adjust the endless screw until you achieve the proper tension and then tighten the lower bolts to secure it, greetings
I got the impression that it's a warm day in the neighborhood. Nice build, what's the rollers made of and how are they held in place?
Pvc, plastic lids and center of metal tube crossed by a smooth 8mm iron and yes it was very warm
Great video, Thanks. I would also like to know what belt material you used. Cheers
Hi, just a rubber 4mm, thanks
If you like that tune check out..Rainmaker One Less Reason
Nice, thanks.
Great video, I have a question on the Blue rollers. Could you describe how these are constructed. I like the idea of using PVC to help keep the weight down for the conveyor I am building and would like to use your roller design.
Hi, pvc tubes and hardwood end tips crossed from side to side by a central metal tube inside the tube an iron that is affirmed on the sides of the structure, greetings.
Sure, +56 9 9824 3103
How many horse power is the motor, and what is its rpm? Is it three phase or single phase?
Just 1.
Wide Maya, have your contractor Use a simple conveyor and save the backs and knocks of the workers. Good luck.
That's awesome. I'm looking to do something similar. What did you use for the actual belt please?
How do you contact Rodalo1636?
Thanks, just went to belt Factory and ask for 7mm thikness
Hola. Una pregunta técnica espero me la puedas resolver: al no tener el sistema de rodillos en V (que al parecer son mejores para transportar agregados) tuviste algún problema con la cinta en cuanto o a si sube bien el material, si se sale la arena por los bordes, si no se desalinea la cinta constantemente, etc. Gracias y Saludos desde México.
No para nada, lo único es que al cargar en la tolva, si es arena o algo parecido, ten el recaudo de poner una goma atrás para evitar que caiga al suelo, saludos
What kind of reduction are you running to get it to that speed?
I experimented as I found the right speed with different pinion and chainwheels
buenas tardes amigo, disculpa para que tipo de material es tu banda transportadora??????????
Hola Roberto, es goma caucho con un refuerzo interior de tela, saludos
This is how EL CHAPO escaped from prison :)))
GREAT JOB CHEERS...
Thanks my friend
Pretty cool, so how much did this cost you when all's said and done?
Close to 500 Us
That's a bargain. Have you since built anymore?
No, I need only 2, thanks
What is the cost of that rubber conveyor belt I am doing a project on it can u please tell me where I can get that rubber belt
For a 20 foot long conveyor belt you need rubber at least 4mm thick. In rubber it is worth approximately 6 dollars per foot. I bought this one from a rubber band factory. Regards.
Welding with all that bare skin💪
Nice work, you have a lot of creativity :)
Thanks, my friend
Thanks my friend
what motor did you use ?
1 hp 1440 rpm
Very nice job!!!! 10!
Awesome! I need this :D Keep on!
Thanks my friend
What kind of U profiles have you used?
2mm 50mmX50mmX100 6m
Thanks for the great video
Any time thanks to you
Very nice job!!!! +10
The naked welder yeah!
Yeah, thanks
Keren.....
Thanks, my friend.
Nice
Thanks
You got to come up north and work you can actually put clothes on and then roll around on the hot Steel
Any time my friend, was to hot day.
I'm making a Diy conveyor belt on the floor well I called it the conveyor belts mini
Great
nice job
thanks
when someone has so little self respect in terms of safety...its a shame really...its not manly..it really is'nt!
I'm sorry you think so, maybe you have a delicate skin.
Keep weldin' bro, shirtless.....hella cool
@@rodalo1636 LOL I'm from Africa. I have a thick skin...and anyone who builds a conveyor is a boss..so keep on trucking..
@@drelaw2002 Thanks Andre, all the good vibes to you
ممتاز
Excellent ...
Sir... I'm searching how to make convey belt structure ..
I'm lucky to watch video .. really I like it .. way of making
I'm planning to make ..new conveyor belt ...flat
I need ur help for technically ...
Can u provide urs mail I'd.. or whatsapp number..
If I get ur support .. easily I can make it ..pls sir..
I'm from india ..
Regarding my poultry I have to need conveyor ..
I have
Sure, these days I'm a bit busy but I'll do what I can. Many greetings, Rodrigo.
rodalo1636@yahoo.com
@@rodalo1636
Length 50 feet
Width 1 feet
Height from the floor 3 feet
Flat conveyor belt ...
Weight 150 kg (feed bags will go on that belt.. 1 bag weight 50kg )
Can u tell me ..which material required ...with Specification
Very nice job!!!! +10
ممتاز