OLM Sequential Style Headlights w/ HIDs
HTML-код
- Опубликовано: 21 дек 2020
- Kevin is getting rid of his stock headlights and installing some new OLM Sequential HID Headlights to improve both his visibility and aesthetics!
OLM Headlights: www.ftspeed.com/part/a-70060-...
8 to 6 pin wiring harness:
Yellow Wire (Turn Signal) - Red wire on OEM turn signal harness
White Wire (DRL) - Green wire on OEM turn signal harness
Black Wire (Ground) - Black wire on OEM turn signal harness
Find your FRS, BRZ, 86 and A90 Supra parts here:
Website - www.ftspeed.com/?...
Instagram - / _ftspeed
Facebook - / ft86speedfactory 
Авто/Мото
These look amazing, but I wonder what kind of diffuser would work for those turn signals to give the same solid look of the drls. I know individual leds are coming back, but I like the clean diffused light of the drls.
For those of you wondering about visibility ill just say this... If you like Minecraft, you'll love the patterns they emit to the ground. There's a good reason why factory headlights are expensive, no aftermarket headlight unless retrospected will emit a perfect factory beam pattern.
so what?
@@gabuardicr so its garbage and you blind people thats what. it becomes a fashion accessory not a head light so you can see thats what.
Y'all should make a video demonstrating how to properly install the D2S/D2H Bulbs to the actual lights.
they never do cause they get free stuff and they usually perform like crap
They look great
Can you take a pic of the beam pattern and throw it in the 86 forums? I want to see how crispy the cutoff is
Thank you merry Christmas
If only the FT86SF headlights had bright DRL's like these do it would have been perfect
Should I get some for my 2017 Toyota 86 860 special edition in Supernova?
What would be the best the watt bulb closest to the 2017 OEM? 5000k or 6000k?
That leveling motor is that for the switch thats inside the car to level the lowbeam hight level?
Does anyone know how to remove the line that limits the low beam?
When are you guys restocking?
Just got these for my 2017 Toyota 86 but the drl are functioning as my turn signal lights. Any help?
it says they're out of stock?? how to I buy
What nub do you tweak to adjust the headlights mine is pointed too low
Hey Kevin, so I have a 2019 86 trd and I plugged it up how you mentioned with the car on and e brake down to see if the boomerang came on as the drl as it should’ve but noticed the turn signals stayed on solid as well, so I plugged it back as it came out the box and then put the hazards on and my taillight turn signals and hazards flashed super fast, did research and some said to repin the yellow and white from the headlight itself, like just switch where they’re pinned to, my drls don’t work as drls I have to manually turn my light on
I unplugged the 8 pin but cant unplug the 6 pin how do I unplug it
DOES IT MATTER IF I HAVE AN 8 or 6 PIN ON USING THE HIDs
Any idea when these will be back in stock?
If my bulbs go out where can i get replacements?
Great video but now how do i put it back together😭😭😭
These look so good
My drl's didn't work even when I switched the 2 wires (2016 brz)
I followed everything but my signals don’t work xd
When these getting restocked
If you have a BRZ that already has HID’s do you still need to run the new HID ballast or can you still run the factory ones. Or do they link together and you run both?
Just installed these and everything works except the DRL’s do not come on with all the lights off as they normally would. They only come on with the parking lights and the low beams.
Yeah need to tap the DRL wire into a another source like the fuse box to have them actually function as DRLs rather than parkers
Bought these from you guys like 4 months ago and I’m already having issues with them
What issues are you having? There is a 1 year warranty on them. Have you contacted the sales team?
Yeah what issues
Sorry for late reply. Issues I was having was condensation inside the lights.
Fantastic headlights. But not Euro compliant, Had to remove them and install the OEM back.
If youre willing to ship them to the states I’ll buy them off you.
Do the DLRs turn on automatically if I install them with the 8 to 6 pin adapter method? Or do they have to be turned on manually?
They turn on just the same as your OEM DRL would.
I have these on my car and they look great. However i am having trouble with the actual focus of the HID’s there is a dark spot right in the middle of the light. Im very confused on how it shines up and down but in the middle of the light path its dark
Would love any recommendations on how to fix this issue
F
I know this is kinda late but I have the same problem…my low beam visibility is total shit and I always have to drive with the high beams on to see. Did you find a way to level the HIDs?
@@theotherguy961 On the website link to the actual product i was reading the reviews and there's a long review explaining where the screw is on the headlight to adjust the beam pattern. I'm sure it's a simple fix once you find that screw and you can get the beam to be angled in the correct position
@@failcheervideos5056 Yes! I found it literally the day after I commented lol it's a white 8mm bolt around where the auto pitch adjustment harness is for the brz. It was an easy fix but none of the installation videos I came across said anything about it..
I got these for my 2016 FRS and everything works fine but for some reason my DRL and the low HID are on when it should just be the outer ring of the drl light... what did I do wrong😅
Bro wtf we have the same last name haha
Installed these and noWHat exactly is the triangular plug for? Couldn't get my lights to function unless I plugged it into where my old turn signal bulb connected to, but now there is no light down under the headlight.
triangular plug is for motor controlled leveling. aka where the light beam shines. why all the headlights have it even tho you dont actually have the ability to adjust it unless manually, idk
OML is the same as VLAND?
GREAT !!
VLAND ?
How much brighter are HID over the stock LEDs?
100 times brighter
If you have stock LEDS these are not better
@@Krojix I would say they're quite on par. Of course there are lots of LEDs combined to shine compared to just a single bulb. That's why the hid is a better retrofit than an LED could be.
@@christianbarrera1093 The HIDs are an upgrade for the 13-15 models, but not when compared to the 17+ models. Stock LEDs will always be the better option.
@@tofu_drew ah I see
Are these OLM versions better than Vlands? Quality wise?
i think theyre the same thing mine came with v land instructions
vlands vs these which one is better in terms of quality?
They are the same thing, these just come with preinstalled bulbs
Do these come with their own ballast? Trying to figure out if these are plug-and-play on a 2015 FRS with halogen bulbs from factory.
You probably already found the answer, but no they don’t. VLAND sells some on their website though
@@richardmartinez5040thanks for the reply and info.
Why doesn’t the DRL work on my FRS ?
You need to wire it to the fuse box
Help!!! I plugged everything the same way you did. But my DRLS /boomerang only comes on when the headlights are turned on. When I drive and put my e brake down, no light comes on.
Flip the connector on the hid ballast
Were you able to figure out what happened?
Same
Would led bulbs work with these?
If you want to use LED bulbs, buy the V-Lands. These are rebranded V-Lands with HIDs added.
Do your day time running lights work? I'm having a hard time trying to get mine to work 2013 frs
Yes they work as shown. How do you have it wired up?
@@KevinVo thanks for the response apparently mine were hooked up wrong, is there a way for me to get the 6pin to 8pin harness I need a new set the shop that did mine put them in wrong hhhhhhuuuuummmm it will be going back to them
My left headlight beam more to the left
These are definitely a cop
Can someone tell me how much a 600hp 2jz-gte vvt-i in a 2017 86 cost?
At least $10,000
Bruh 2jz are imported and expensive get an LS instead
It already says out of stock online!
They’ve been out of stock for months
I got mines on cyber Monday and it was discounted
how do I adjust the HID leveling?
Manually?
@@Fareitorov yes. is there a knob or..?
@@andrewhaskell55 yes, specialist will use tools and level them
@@Fareitorov okay. thank you
How does night time visibility compare with these and the stock brz headlights?
Is s shit. Stock with led are 100% better. This light are good for show off no more than that. Visibility is a shit
@@joelhendz Damn even with the HIDs?
@@Duh-Shawn yes. Is a shit. This is a good look only. If you want to have a good visibility put led in high and low beam.
Better than stock FRS that’s for sure, I just had to reaim the OLM ones
@@Mountain413 jajajajaja In your dreams that headlight are better than stock with leds.
Guys, does they turn on the drl at daytime at auto mode? I have the same ar 2017 with activated drl in ecu, but they didn't work automatically at daytime
Mine same bro
@@aaronfebrian2726 But why, i even don't know if the original work.
Have you found a reason why?
@@PierreMetro sorry, but no.
@@Fareitorov just found out our fog lights count as our DRL’s even though it clearly stats the boomerang is the DRL on the vland website where I purchased. I’m just gna have to get used to switching it on and off lol
Soooo the brz is plug and play?
Yep
Where'd u get the t taps
Lmk when you find out
Looks like my Vlands
Just installed these on my 2013 frs and they look great! But I noticed the low beam seems to be angled so far down that I can only see 10 inches of tarmac in front. The only way I don’t drive completely blind is by keeping the high beams on all the time. Low beams are almost completely useless, I know the triangular plug is meant for leveling but my frs doesn’t come with anything to plug it into… does anyone else have these issue? Is there a way to angle the low beam up manually???
Thought i was the only one, I have this exact issue, Low beam is useless, high beam isn't even high no more 😂
Did y’all figure it out because I have the same problem 😅😂
Yeah I did! There should be a white plastic bolt that turns both ways to make the low (and high) beams adjust their height.
To adjust them I just went to my local mall at night in their empty parking lot and shined on a wall. I can’t remember exactly the procedure on this but I think Chris Fix has a video on it!
Bring these back in-stock
Fr
Which cars have 6 pin connectors and which have 8 pin?
The FRS has the 6pin connector , I needed the adapter since I have a 2015 frs and did the wiring like in the video
The BRZ has the 8 pin and Im assuming the 86/gt86 also have the 8 pin
@@thatwhitefrs5360 i just ordered these and i have a 13' FRS, does it come with everything included (I'm awful at wiring)
@@lukelikescars yes it comes with everything you need to install except the quick splice connector , ( the blue ones ) and the wiring is done like in the video
It’s easy honestly I’m bad with wiring too and I did it quickly
The “hardest “part for me was taking the bumper off LOOOL only because that was my first time taking it off
It's been 7 months and still out of stock 😐
i like this guy but i miss Thomas
This guy explains everything perfectly.
IF YOU ARE JUST TAKING THEM OUT OF THE BOX, MAKE SURE TO PUT THE BULB IN THEM FIRST
Hurry up and restock them already 😑
They're restocked, just bought some the other day
Out of stock k
Video posted yesterday for an item thats out of stock. ok.
86 dudes will complain about people who buy rep wheels then go and buy rep VLands and rep Valentis
They're not reps if they're the same thing lol
The "rep valentis" on their site are literally valentis
So what kind of rep wheels do you run?
There not reps and in this case the olm headlights are better since they come with a HID kit pre installed
@@thatwhitefrs5360 if they’re direct copies of another product, that by definition is a rep 😂
made in China?
What is the difference between these and the V-Land Headlights? They look identical
HIDs
They're rebranded V-Lands with HIDs preinstalled.
That's perfect I don't want the HIDs so I'll look for a set of vlans thank you
Its better to not use any hid, much more easier to change it to biled modules
@@Fareitorov Exactly, I have MOAB LED's. They are insanely bright especially in projector housings. I definitely just want different looking headlights just no HIDs which are a pain, expensive, and unreliable. My LED bulbs were expensive but are high quality.