Now this is my favorite video because you silenced all horns and sirens, and even strobes are audible silenced as well, so I liked this video. Do the same thing again for the next system test.
Nice one! My high school had EST 270-SPOs (some of them with stopper protection covers) and EST integrity speaker strobes. I don’t know what the panel was, but my high school was established in 1997, so I’m guessing EST3.
Fun fact about the 270-SPO: In all the areas of my school except for the back hall, the pull stations are these, however they're labeled "LOCAL ALARM".
@@owenweber5527 congrats, your school has a modern system. Ours is a similar story except it's BG-12LS pull stations and Gentex Commander 3s on, you guessed it, mechanical horn mode.
I wanna see an all Gentex speaker strobes with an Alert Gentex speaker strobe and a Fire Gentex strobe on an Expander plate for the next 9200UDLS test.
I really messed up with my Edwards alarms. I had a board to put them on, and I made the hole for the 278-SIGA to go in the middle, and on the right was the 270-SPO. Turns out the keyhole for the 278-SIGA is on the right. I can't put more holes in the board as it is starting to fall apart, so I really messed up.
were do you get your stuff i am trying to get into this i am disabled and have nothing to do i like alarms and i have limit amounts of money were would you recomend i get a starter system with an alarm and a controller with battery backup just something basic and fucntional to start
You know as you do next time you should have 652 alarms and they should be controlled by one switch and then you should go in another room with them and they should control each fire alarm in six rooms that you have for these fire alarms thank you
Nice video and system! I think it's nice to see 270 SPOs on this board. And I'm guessing LED strobes are slowly taking over? Also 3:14 I see a Wheelock 7002T from your other system test video.
So you don't make the same idiotic mistake that I did concerning Edwards' new LED Genesis alarms: If you order any of the new G4 series alarms (G4A, G4V, G4AV), you will have to order a mounting plate separately. By default, they don't come with mounting plates.
"ME" stands for "Monaco Enterprises" a company that makes very simple conventional fire alarm panels. so its not pronounced Me like yourself, but M. E.
Now this is my favorite video because you silenced all horns and sirens, and even strobes are audible silenced as well, so I liked this video. Do the same thing again for the next system test.
I've been waiting for another EST video!
I love your videos SER Safety! I also love learning about fire alarms as well!
You're the you're the best fire alarm creator
Ayeeeee my fave youtuber posted
Your neighbors must love you dude
Lol, I don't know about his first place but at this place he is in the middle of Idaho
Nice one! My high school had EST 270-SPOs (some of them with stopper protection covers) and EST integrity speaker strobes. I don’t know what the panel was, but my high school was established in 1997, so I’m guessing EST3.
your channel has inspired me to make my own fire alarm channel. thanks
Love the set up! Great demonstration!
*CJ9899 APPROVED*
Lol
Hope your doing well SER Safety!! Nice system test
Thanks grant!
Cool video! ME stands for Monaco I’m case you didn’t know. As for EST, their notification appliances and pull stations are better than their panels.
Love the sound of the est chime!
Ya
Nice EST. Aka Every single trouble.
Great system Grant! Liked the video.
Cool video! I’ve been hoping for another EST video!
The new Genesis model looks 🔥
so fire that it went off
I remember when I used my EST alarms for a video as well!
Fun fact about the 270-SPO: In all the areas of my school except for the back hall, the pull stations are these, however they're labeled "LOCAL ALARM".
@@owenweber5527 congrats, your school has a modern system. Ours is a similar story except it's BG-12LS pull stations and Gentex Commander 3s on, you guessed it, mechanical horn mode.
1:45 Could have been a hospital system
agree
super cool test!
EST big boy.
Can you use the Siemens ummt on the garage system ? Nice video!
cool coding of the alarms btw
Nice system test!
Gentex sync also seems to work on the genesises
Nice alarms
Whats the alarm that has the loud bong sound that's the most noticeable?
I like that sound.
Nevermind, I found it.. it was the chime strobe.
I wanna see an all Gentex speaker strobes with an Alert Gentex speaker strobe and a Fire Gentex strobe on an Expander plate for the next 9200UDLS test.
Love It
MOREALARMS Me To!
I have one of those est pull stations but the screw is badly stripped
Gotta love chimes and horns working together
One of the fire alarms sounds like a sound tone when a car door was left open, it's the one next to the tornado alarm
How many NACs are on the Unimode 10UD?
Very nice
I really messed up with my Edwards alarms. I had a board to put them on, and I made the hole for the 278-SIGA to go in the middle, and on the right was the 270-SPO. Turns out the keyhole for the 278-SIGA is on the right.
I can't put more holes in the board as it is starting to fall apart, so I really messed up.
Can you put an EST Genesis on March Time?
I have just purchased the HOCHIKI HPS SAK Pull station I slowly going to start building a fire alarm system any Tips and Advice?
were do you get your stuff i am trying to get into this i am disabled and have nothing to do i like alarms and i have limit amounts of money were would you recomend i get a starter system with an alarm and a controller with battery backup just something basic and fucntional to start
I wish i never stopped collecting fire alarms
I remember I saw a GE (general electric) 270-spo
Does it have a head that smoke detector?
You know as you do next time you should have 652 alarms and they should be controlled by one switch and then you should go in another room with them and they should control each fire alarm in six rooms that you have for these fire alarms thank you
Ser safety do you have any status about the security system ?
Can I have one of those est chime and a fire alarm control panel and a pol station with the key
Why do never have anything on sale anymore??
Request: ADT Unimode 10UD System Test 15 Electro Mechanical Horns
I just brought a system sensor P1224MC! Do you think that you can put it in a system test??
Do you wear ear protection so you don't go deaf?
Can you do the Wheelock MT with the simplex 2901 with march time and for pull stations chevron pull station and the est pull station.
What does candela mean?
Is there a way to make a demo board without spending a fortune?
Nice video and system! I think it's nice to see 270 SPOs on this board. And I'm guessing LED strobes are slowly taking over? Also 3:14 I see a Wheelock 7002T from your other system test video.
When are you going to open another box with fire alarms?
When he buys some....
Okay then...
2:11 Car beeps
That's the fire alarms that you're hearing.
Which fire alarm is it that makes the car beeps
@@sabakhan973theres no car beeping
Its the speaker💀
EST works on gentex sync.
Hi Grant!!
The EST chime sounds like the Honda chime
iluvmercedes sounds like it
can i have one of those mini panel another in need the key to
JESUS THE NEW ALARM IS SO LOUD
Why don’t you say the dB when you’re doing the videos
"System Sensor Sync" sounds like Pulse to me. Pulse is just a 60bpm march.
I realized the est led strobe/horn is on calafornia code
So u can hear the chime
i dont have the keys to the pull stations
Alarm request for adt unimode 10ud system test 15 simplex 4030 horn
The led est fire alarm does not sound so chime like
Ya
Next video, use a Wheelock 7002t code 3
Closed captioning says the alarms going off are “Music” lol
Your right
Cool!
Honestly edwards est fire appliances kinda look ugly imo but very recognizable
I think that siren is the LOUDEST One.
Did not know that Toyota made fire alarms
Hoi can you do a cooper wheelock Exeter I think I spelled that right with an I3 series smoke detector and test it with the EPIC SMOKE SABER!!!!
Slow March time = pulse temporal 3 = code 3
*subscribes* edit:WOOOOWWWWWWWWW COOOL
11/10
Go ahead
THAT'S FIRE ALARM TEST
So you don't make the same idiotic mistake that I did concerning Edwards' new LED Genesis alarms:
If you order any of the new G4 series alarms (G4A, G4V, G4AV), you will have to order a mounting plate separately. By default, they don't come with mounting plates.
Why can’t every building have a calm nice one like in 2:17
4:19 thats a small smoke detector!
The only way I could find 0:18
Hi
:( I don’t have yellow alarm at my school I wish
Sounds like a car chime
I came here for the push alarm
Push station*
HELLO I MISS U
"ME" stands for "Monaco Enterprises" a company that makes very simple conventional fire alarm panels. so its not pronounced Me like yourself, but M. E.
I don't know why, but I imagined a system test with a Federal Signal Q siren XD Help me!
Can I get a fire alarm system off you for about 200 Australian dollars
Pacific national Trains no
EST means eastern standard time.
The first time the two 0:05
Regalar una alarma soy tu fan🎉😂❤❤😂
23rd February 10001 (recorded)
my mom will buy me luigi yoshi and hammer bro plush
hi My name is zyir
You are
10UD= loUD