A demonstration of the simplicity in installing Cork Board insulation by Amorim. (Note that external applications generally require mechanical fixings)
darthlaurel We use it widely for retrofitting traditional (solid wall properties) but it has a wide range of applications for new build projects. There’s lots of information on our website www.mikewye.co.uk
Thinking of using expanded cork panels on the roof of my garden office 😊. I think it looks a beautiful material , so you think it will be ok on a roof ?
Hi. I am from Romania and we are building a metal framed house soon. I am thinking to use the cork insulation panels for outside and inside as well. The walls will be 25cm wide. What thickness I would require for external walls? Do I need any vapour barriers? The outside will be plastered and painted. Do you think that is enough to insulate the outside only or I need to insulate the inside of those frames as well? Thank you in advance.
Could this also be use horizontaly to insulate the flat underside of a concrete floor with floor heating? And se the adhesive the fix it? We have a dry crawl space under the house and this looks like a great alternative for PIR.
Hello Bas, thanks for your question. The cork is a good alternative to PIR, as you have observed. If you would like to contact our technical sales team we will be pleased to offer advice on your proposed application.
Maybe I am missing something here - the video is showing cork board being installed on the outside, yet your Note is stating requires mechanical fixings? Need both? If mechanical fixings are to be used, how is water prevented from seeping through the fixing onto the OSB/ply? Also I'm assuming (correct me if I am wrong) the cork board is dense enough to prevent water to permeate through to the OSB underneath, is that correct? What about the gaps between the cork boards? Love to use this, but am uncertain with the installation methods suggested by suppliers.
Tahera Khan This is a demonstration wall showing how to apply the boards with the adhesive. This system can be followed internally without the need for fixings but externally we recommend fixings for a ‘belt and braces’ approach. These standard cork boards would always be rendered or plastered which provides the protection, water-tightness and covers any fixings. There is a facade cork board which can be left un-coated but the application is slightly different. I hope this helps.
@@MikeWyeLtd That makes sense! Thx! So I need to look at the fascade cork board (I like the un-coated look) for an external application. We have already have Tyvek housewrap already wrapped around the timber frame walls of the shed. We have wooden battens which we have nailed on top of the Tyvek, so going from internal to external, Frame > Tyvek > Battens. Questions: Is the fascade board dense enough for a screw to go through (without the board crumbling) into the battens?
@@taherakhan7044 The facade boards are designed to be used without any fixings at all so really only lend themselves to solid masonry application or onto a rigid carrier board. Trying to fix to timer battens without a significant washer would be difficult due to the nature of the material.
@@CJ.Hamblin Millions of homes clad in EIFS failed, similar to this. Buildings ALWAYS get wet - rain, humidity, moisture drive, etc. Those that survive have a moisture management plan. OSB doesn't have the perms that plywood has, and OSB soaks up moisture (vapor and bulk) and then swells up, causing mold and dry rot.
Northern hemisphere climates will require weatherproofing and rain screen details. This assumably close to equator where building science is different.
@@MikeWyeLtd I understand. At the same time, this method of attachment does not seem to be correct. I could be wrong, but doubt it. Could you ask the supplier what the correct process is? I am curious what they will say: without support at the bottom, and no mechanical attachments to the wall but only glue, they whole installation could fall apart. Cracks, detachment, breaks.
@@vdoundakov Hi Viktor, With the cork facade board, no mechanical fixings are needed with the adhesive. The cork is very light. The standard cork insulation panels would have mechanical fixings and base rails, as they have the weight of render on also. There is a note under the video about mechanical fixings.
Hi Patricia. We are a UK based company so would suggest you contact the manufacturers, Amorim, regarding a distributor in the USA www.amorimcork.com/en/contacts/united-states-america/ I hope this helps.
@@MikeWyeLtd I´d put this link in your description, its what i´ve been reading all the comments for! Great video btw, gives some confidence to us DIYérs
Is it as light as you’d assume cork is? I know that cork is a sound deadener and foam is a sound absorber, so cork is better, but is cork the better insulator?
It is cork so assume its weight is comparable to the types of cork you will be familiar with. Cork has good acoustic properties and you are correct that soft, fibrous materials act to absorb rather than deaden/reflect so it depends how you intend to use the material. For example, soft fibres such as sheep wool are great for internal acoustics by minimising echo etc. whereas denser materials will be better at deflecting sound (such as keep noise out from the neighbours!). However, we primarily deal with cork as a thermal insulation material so do not generally get involved in the complexities of acoustic insulation beyond the above. I hope this helps.
Am using 2.5cm corkboard for my Kominka renovation in Japan. Looks like this video is about 3cm. Corkboard is extremely lightweight. Use a multi tool with wide wood cutting blade in a jig to cut it. Messy but much easier and faster than by knife. Less waste than saw.
Thanks for your comment. To adhere cork we use SecilTek Isovit E-Cork (and for adhesion of cork facade a variation on this: Isovit E-Cork MD). Details can be found here: www.mikewye.co.uk/product/secil-tek-isovit-e-cork/
@@ysabelleortiz4138 Yes you can, externally we normally recommend using mechanical fixings as well as the adhesive before rendering in lime. If it is the decorative facade board then the mechanical fixings are not necessary.
Looks like chocolate cake with butter cream icing.
I'd love to know more about how this is being used.
darthlaurel We use it widely for retrofitting traditional (solid wall properties) but it has a wide range of applications for new build projects.
There’s lots of information on our website www.mikewye.co.uk
Thinking of using expanded cork panels on the roof of my garden office 😊. I think it looks a beautiful material , so you think it will be ok on a roof ?
Hi. I am from Romania and we are building a metal framed house soon. I am thinking to use the cork insulation panels for outside and inside as well. The walls will be 25cm wide. What thickness I would require for external walls? Do I need any vapour barriers? The outside will be plastered and painted. Do you think that is enough to insulate the outside only or I need to insulate the inside of those frames as well? Thank you in advance.
Hi Emese, thank you for your comment. Is it possible that you can email us sales@mikewye.co.uk? It will be easier to attach drawings etc.
about how much does labor cost per sq foot? excluding materials. Looking to get this done for outside of my room
Could this also be use horizontaly to insulate the flat underside of a concrete floor with floor heating? And se the adhesive the fix it? We have a dry crawl space under the house and this looks like a great alternative for PIR.
Hello Bas, thanks for your question. The cork is a good alternative to PIR, as you have observed. If you would like to contact our technical sales team we will be pleased to offer advice on your proposed application.
Maybe I am missing something here - the video is showing cork board being installed on the outside, yet your Note is stating requires mechanical fixings? Need both? If mechanical fixings are to be used, how is water prevented from seeping through the fixing onto the OSB/ply?
Also I'm assuming (correct me if I am wrong) the cork board is dense enough to prevent water to permeate through to the OSB underneath, is that correct? What about the gaps between the cork boards?
Love to use this, but am uncertain with the installation methods suggested by suppliers.
Tahera Khan This is a demonstration wall showing how to apply the boards with the adhesive. This system can be followed internally without the need for fixings but externally we recommend fixings for a ‘belt and braces’ approach.
These standard cork boards would always be rendered or plastered which provides the protection, water-tightness and covers any fixings.
There is a facade cork board which can be left un-coated but the application is slightly different.
I hope this helps.
@@MikeWyeLtd That makes sense! Thx!
So I need to look at the fascade cork board (I like the un-coated look) for an external application.
We have already have Tyvek housewrap already wrapped around the timber frame walls of the shed. We have wooden battens which we have nailed on top of the Tyvek, so going from internal to external, Frame > Tyvek > Battens.
Questions: Is the fascade board dense enough for a screw to go through (without the board crumbling) into the battens?
@@taherakhan7044 The facade boards are designed to be used without any fixings at all so really only lend themselves to solid masonry application or onto a rigid carrier board. Trying to fix to timer battens without a significant washer would be difficult due to the nature of the material.
@@MikeWyeLtd So no issues with moisture if using the facade boards direct fixed on OSB as the final exterior finish?
@@CJ.Hamblin Millions of homes clad in EIFS failed, similar to this. Buildings ALWAYS get wet - rain, humidity, moisture drive, etc. Those that survive have a moisture management plan. OSB doesn't have the perms that plywood has, and OSB soaks up moisture (vapor and bulk) and then swells up, causing mold and dry rot.
is there any prep required for either OSB panels or thermalite bricks - or can you just apply the cork tiles with the plaster being used? thanks
Northern hemisphere climates will require weatherproofing and rain screen details. This assumably close to equator where building science is different.
Why is the first row of boards not supported by a metal tray?
The video was given to us by our supplier and shows application of the boards for demonstration purposes only
@@MikeWyeLtd I understand. At the same time, this method of attachment does not seem to be correct. I could be wrong, but doubt it.
Could you ask the supplier what the correct process is?
I am curious what they will say: without support at the bottom, and no mechanical attachments to the wall but only glue, they whole installation could fall apart. Cracks, detachment, breaks.
@@vdoundakov Hi Viktor, With the cork facade board, no mechanical fixings are needed with the adhesive. The cork is very light. The standard cork insulation panels would have mechanical fixings and base rails, as they have the weight of render on also. There is a note under the video about mechanical fixings.
Please give more info. where to buy or who applies it! More info on the product as well! Can you purchase it in the states and where ?
Hi Patricia. We are a UK based company so would suggest you contact the manufacturers, Amorim, regarding a distributor in the USA www.amorimcork.com/en/contacts/united-states-america/ I hope this helps.
What is the icing that is being used to fix the panels?
neil evans The adhesive is a hydraulic lime blend by Secil called AdhereVit ecoCORK www.mikewye.co.uk/product/secil-adherevit/
Is it an all natural adhesive? Can it be used for internal and external walls?
@@MikeWyeLtd I´d put this link in your description, its what i´ve been reading all the comments for! Great video btw, gives some confidence to us DIYérs
Is it as light as you’d assume cork is? I know that cork is a sound deadener and foam is a sound absorber, so cork is better, but is cork the better insulator?
It is cork so assume its weight is comparable to the types of cork you will be familiar with. Cork has good acoustic properties and you are correct that soft, fibrous materials act to absorb rather than deaden/reflect so it depends how you intend to use the material. For example, soft fibres such as sheep wool are great for internal acoustics by minimising echo etc. whereas denser materials will be better at deflecting sound (such as keep noise out from the neighbours!).
However, we primarily deal with cork as a thermal insulation material so do not generally get involved in the complexities of acoustic insulation beyond the above.
I hope this helps.
Am using 2.5cm corkboard for my Kominka renovation in Japan. Looks like this video is about 3cm. Corkboard is extremely lightweight. Use a multi tool with wide wood cutting blade in a jig to cut it. Messy but much easier and faster than by knife. Less waste than saw.
What product name for the adhesive?
Thanks for your comment. To adhere cork we use SecilTek Isovit E-Cork (and for adhesion of cork facade a variation on this: Isovit E-Cork MD). Details can be found here: www.mikewye.co.uk/product/secil-tek-isovit-e-cork/
How thick is the cork board used in this video? How does this translate qua energy saving?
I believe it's 6 cm.
what kind of adhesive is it ?
Hi Harjit, it is a product called Isovit E-Cork, here is a link www.mikewye.co.uk/product/secil-tek-isovit-e-cork/
This is used to insulate sound or heat?
Cork has both good thermal and acoustic insulation properties.
@@MikeWyeLtd nice. What about insects, can live in compared to rock wool boards?
@@amerrashed6287 I don't think that they are more prone to insects than any other natural board insulation
Before you apply the cork....Is the wall a wood or what??
In this case yes it is an OSB board but the cork can be fitted to almost any substrate
Is it possible if you apply it directly to the concrete wall?
@@ysabelleortiz4138 Yes you can, externally we normally recommend using mechanical fixings as well as the adhesive before rendering in lime. If it is the decorative facade board then the mechanical fixings are not necessary.
@@MikeWyeLtd thank you
@@ysabelleortiz4138 No problem
What is the type of glue used?
The product is made by Secil and called Isovit E-Cork
@@MikeWyeLtd thanks