balanced vs unbalanced cables / connectors & signal
HTML-код
- Опубликовано: 12 сен 2024
- This video shows the most common unbalanced & balanced Pro Audio cables , the wiring & their use. What is the difference between balanced & unbalanced cables. How the unbalanced & balanced signals are processed.
Links to the books I highly recommend you guys to read :
1: Yamaha Sound reinforcement Engineering .Link to Amazon : goo.gl/0rPD8q
2: Live Sound Reinforcement - Hunter-Sark Link on Amazon : goo.gl/Oahx7o
3: The Mixing Engineer's Handbook: Fourth Edition
by Bobby Owsinski Link on amazon : goo.gl/aNraBI
4:The Recording Engineer's Handbook 4th Edition by Bobby Owsinski Link on Amazon : goo.gl/v9bsUi
5: The Mastering Engineer's Handbook 4thEdition by Bobby Owsinski Link on Amazon :goo.gl/1jIytx
6: Music Theory for Computer Musicians
by Michael Hewitt : Link to Amazon : goo.gl/pk3WhN
Like and share the video and subscribe to my channel.Thanks for watching
Balanced vs Unbalanced Audio explained in this video
ruclips.net/video/DlWviGa8GEk/видео.html
That TS cable to speakon is not used for guitar to active speakers. Speakon is a high voltage connector therefore it is used for passive speakers. That cable is just an alternative connection for speakers say if the amplifier only has jack connectors for the output or vice versa. Active speakers will not have speakon connections unless it is an output to another passive speaker.
Great video. Very informative. Thank you for taking the time to show all the parts
Very explanitory and simple to understand. Thank you so much!
I have a Scarlett 2i4 with 1 pair of balanced plug outputs and 2 pairs of unbalanced RCA.
My monitors have just a pair of RCA inputs. Which outputs shall I use? Thanks!
+Gabriel Frison , Use the RCA outputs from focusrite scarlett because your monitors only accept unbalanced inputs , regardless you feed them with balanced signal , the signal still will be unbalanced.
That was very useful, thanks!
+Gabriel Frison , You are welcome , any questions in future , please do ask on the channel.
+AVME Videos (audiovideome) wat about getting rid of buzzing sound in stage monitors?
What about buzzing noise , are you getting buzzing noise in your stage monitor setup ? If yes make sure you are using balanced cables/connectors to the monitors , get rid of any ground loops etc. Also try phase inverse on your devices.
Thanks for the tutorial....lotsa useful info.
isn't balanced stuff almost exclusive only to Live performance? so if i wanted to rework my whole pc desktop to mixer situation and do it to be balanced ... it would be impossible , since it starts by a small unbalanced jack output. Secondly if i choose to go with USB to the mixer, it is still unbalanced, and putting TRS connectors on all my mixer inputs/outputs would be pointless?
thank you for explanation .i buy for the first time amplifire how to connected balance and un balance i get good briefing .
Good to know , all the best.
Thanks I think you have just helped me solve a problem 👍🏾
Glad to know your issue is resolved , thanks for watching !
amazingly explained ! thanks
+suraksha kumar , Thanks for watching .
how do you get 2!!! signals from electric guitar from which 1 is inverted in relation to another?
My device output and cable are classified balanced. Do i need my iem classified as balanced as well or there’s no such thing?
my question is how about the wire?what kind of wire that we use?
hello great video. how do you connect a symbilink cable to rca . 6 pin symbilink cable to a rca cable. it would be really helpful. thanks
symbilink to Rca female adapter , then connect rca cable to female rca end.
You didn't explain where the cold or out-of-phase signal comes from...what generates the cold signal?
How to connect in musical function in Yamaha mixer and music in St remote
Not being a sound technician does a balanced stereo 3.5 jack on a set of headphones work in a normal unbalanced stereo 3.5 jack socket ?
nop
How to connect Yamaha mixer in musical musical function
Thank you!
I have the symbilink wire cut .and the rca wire cut . try to put them together. home made. there is a left has a + and - .just like the right side. but there is a vop pin that also has a + and a - . would like to hook them together with two female rca .
just get a adapter and save urself time and effort for something more productive. or else do research on net to create diy wire for ur requirements.
speakon is for output of an amplifier, not output from instrument or line output.
speakon is usually used from an output from an amp to speaker then out from speaker to another for daisy chain. It based on cable connector and chassis connector . who suggested it's an output from an instrument ?
AVME Videos the TS to speakon cable is a speaker cable i think. not a signal cable.
AVME Videos he said from guitar to active speaker. but i guess it is a speaker cable. TS contact can be rated to 15 amps. so they are used for amplified signals too. not only line level.
dear friend all cables pass signals as long they do their job in correct manner , cables can appear in any form , u can create or invent one , if it holds it's value in terms of delivery .
AVME Videos signal cables should be shielded, but speaker cable is not shielded. speaker cable should have low resistance. but resistance is not the issue with signal cable.
Sir , how to connect xlr female to ts male
this is being used for a zapco car amplifier
Are TRS cables compatible with TS inputs?
+Will Prat , Yes but the connection would be unbalanced. In order to achieve pure balanced connection the cables and inputs at both ends need to be balanced.
AVME Videos Thank you
Ola maestro buenas tardes saludos siempre veo sus vídeos pero sera que lo puede ASE favor de traducir en español
thank god yt has a speed function
Conner K Ward θ
lol! I know right?
Good info, but delivery needs a bit of improvement
thx for remind me this xD
couldn't see shit! blurry as hell, sorry mate
If your going to be doing videos a lot invest in a camera that can focus (just a hint) have a good day
So I have researched the shit out of this and still havent found an answer which means Im probably asking the wrong damn question on google but maybe some of you hifi geniuses can help me out here. I have currently 2 sets of headphones with unbalaced cables with 1/4" jacks. I found an adapter on amazon that supposedly will allow me to plug my unbalanced cables into a male 4 pin xlr so I can then use the higher power output provided the balanced section of my questyle cma400i amp/dac. My question is will this actually work and or is it bad for my equipment in any way? I would much prefer this option to spending a bunch of money on some balanced headphone cables. Any help greatly appreciated.
Read more
REPLY
dj
uuuuuhhhhhh..
All the a.... A..... A..... A...