omg thank you so much for the awesome video and clever mounting system! and for being so generous to share with us! im going to try to use it for my 10.2 cherokee body! Thank you :)
i just had a friend print your system out for me, it should work just fine, my rear bumper is a bit different but i'll make it work, rear shock mounts next
Where did you get your shock mounts? I have the same body and I am having trouble locating shock mounts that will allow a clean mount of the body without the frame showing too much
Really nice mechanism! I'm just racking my brain when thinking about force needed to attach the clamps..would tpu as a semi-rigid material work if the clamps had more aggressive angle? Tpu remembers it's shape quite well.
You could always try it out. I have never used TPU. But look out with making the bottom part of the clamp to long. It could start rubbing against the tires when turning.
Hi Danny, I'm from Sweden. The shipping can get costly. I would joins some 3d group on FB and ask. Usually there lots of people that can help you out 😊👍🏻
Hej Dragan, Den finns att ladda ner på thingiverse om du vill printa själv 😊👍🏻 du tänker på bakfästet? Är osäker på om den skulle passa Toyotan. Men testa kan man alltid göra 👍🏻
Hello, yes I have spacers but it is because I have added 20mm in the middle of the truck. To get it more scale. But It is not necessary if you don't have added the extra 20mm.
@@thercstudio349 ok i see thank you so just the parts from thingiverse is ok for the build? Did ypu do something to youre back suspension mount to? It doesnt fit without this modification? And you maybe have link or something for that piece if its needed please?
Hi, yes you will need a different rear suspension tower. The original is to high. The ones I have I have 3d printed aswell. I don't have any file online though. Please check you rear bumper if it is like the one I have. The rear part of this file is quite exact for the type of bumper I'm using. I'm not sure if this will fit other types of bumpers. The front is on the other hand not depending on the front bumper.
I don't think these would. They are specific for the scx10.2. But you can always design something similar but with the correct measurements for the trx4 👍🏻
omg thank you so much for the awesome video and clever mounting system! and for being so generous to share with us! im going to try to use it for my 10.2 cherokee body! Thank you :)
very good idea 👍👍👍 for my d90 ,congratulations for this system😊
i just had a friend print your system out for me, it should work just fine, my rear bumper is a bit different but i'll make it work, rear shock mounts next
Great! 👌🏻
That's a sweet system, well done mate & thanks for showing us.! 😜 👍
Excellent work.!
Gona print these and give it a try🤞🏽
outstanding!
Great Work! Thanks a lot!!!
Thanks for This! 🤓👌👌👌
nice setup. what kind of shock mounting that you use ?
Would you tell me what colour grey paint you used please? It’s very nice and is exactly what I had in mind. Thanks
Hey! Thanks!
I used Montana Gold 400ml Stealth 👌🏻
Thank you very much
Hi there. Please?? We need the stl files for the shock mounts.. Thanks Buddy..👌👌👌
Printed this !!!! Tha ks and wondering what interior you used for your build.
Very good ideal bro! May I know where to buy the thing the hold the body?
nice
Very smart! thaks for share!
would have the stl of the slanted shock absorber bracket of your
same question, what kind of shock mounting that he use
Any running videos with no music just truck sound? Does it rattle at all?
Hi, look at this video. No music 😊ruclips.net/video/YfaYhKaMqmY/видео.html
Where did you get your shock mounts? I have the same body and I am having trouble locating shock mounts that will allow a clean mount of the body without the frame showing too much
Hi Brad,
I have 3d printed them. I couldn't use the original ones as you say
@@thercstudio349 I just finished printing and installing your body mount last night, thank you so much!! Do you have a file for the shock hoops?
Hi, congrats for your great job!. Can you say which make is your Jeep Comanche hard body? thank you,
Hi Juan,
It is the Injora version. Although I have 3d printed an extension to make the truck look like the real Comanche. The wheelbase is the 333mm.
Har du några bilder på hur den ska monteras i bak? Riktigt grymt kit du fått ihop! En polare printade precis ut ett till mig som jag ska testa!
Do you have a link for that piece that hold the bumper to you chassis? Grts end Thanks
it's the Injora body
Hi Sam, yes that is correct. Although I have printed the middle part so that it looks more like the real truck. So the wheelbase is 333mm.
@@thercstudio349 ah ok I was wondering what you meant by 333mm, because stock is 313. Cool.
43rd thumbs up. Outstanding job.
Thanks
thanks a lot
Nice vid how much would you charge me for this mounting system do not have a 3D printer
Really nice mechanism!
I'm just racking my brain when thinking about force needed to attach the clamps..would tpu as a semi-rigid material work if the clamps had more aggressive angle? Tpu remembers it's shape quite well.
You could always try it out. I have never used TPU. But look out with making the bottom part of the clamp to long. It could start rubbing against the tires when turning.
Hi. Do u have stl file for it?
Any way of purchasing a set from you? I don't have a 3d printer
Hi Danny, I'm from Sweden. The shipping can get costly.
I would joins some 3d group on FB and ask. Usually there lots of people that can help you out 😊👍🏻
What the rear bumper u are use do u have link please
It's called a comanche
He knows this lol
hi, could you share the link to the front body attachment? I have the same body and the problem with mounting it at the front.
Hi Patryk,
I don't have a link at the moment. But I can inform you when I have 👍🏻
The RC Studio
I would be very happy waiting for this day 😁
Hey man, this mounting system looks ace!! Would you be able to share your STL on Thingiverse if possible please?? Thank you 😁
@@teejholt Hey! Thanks! I'm working on it 👍🏻
It is uploaded! www.thingiverse.com/thing:4237534
I was wondering if the GRC aftermarket inner fender wells for the scx10 ii XJ will fit this hard body?
Hi Craig,
I'm sorry to say that I don't know.
I made my own using plastic folders that I cut to the shape I wanted.
They fits perfectly
Do you have printed the inner fenders to?
Were can i found the files for the inner fenders?
Tjenare, Säljer du denna,behöver ha till min toyota hardbody till scx10. Tror vi snackat om det på Crawling Mellansverige /Dragan O
Hej Dragan,
Den finns att ladda ner på thingiverse om du vill printa själv 😊👍🏻 du tänker på bakfästet? Är osäker på om den skulle passa Toyotan. Men testa kan man alltid göra 👍🏻
@@thercstudio349 Jasså. Du fick till det jätte bra iaf. Vad är det lagt för sökord på thingsgiver?
@@dragge6 www.thingiverse.com/thing:4237534
did you put spacers to? i dont find them on thingiverse
Hello, yes I have spacers but it is because I have added 20mm in the middle of the truck. To get it more scale.
But It is not necessary if you don't have added the extra 20mm.
@@thercstudio349 ok i see thank you so just the parts from thingiverse is ok for the build? Did ypu do something to youre back suspension mount to? It doesnt fit without this modification? And you maybe have link or something for that piece if its needed please?
Hi, yes you will need a different rear suspension tower. The original is to high.
The ones I have I have 3d printed aswell. I don't have any file online though.
Please check you rear bumper if it is like the one I have. The rear part of this file is quite exact for the type of bumper I'm using. I'm not sure if this will fit other types of bumpers.
The front is on the other hand not depending on the front bumper.
@@thercstudio349 yes i have the same i think. Can you maybe share the 3d files for suspension mount please?
Just shut up and take my money! Lol fr tho wheres the link? 💸
what the color of your rc car?
This is the color 👍🏻
www.amazon.com/Montana-Gold-Acrylic-Stealth/dp/B0047D28W4
Can one be made for a trx4?
i was wondering dose this work on a trx4
I don't think these would. They are specific for the scx10.2.
But you can always design something similar but with the correct measurements for the trx4 👍🏻
I wont buy it.can you send link?
You have the link in the video description 😉👍🏻
@@thercstudio349 i wont all parts chase,body