How To Make Clear Sound Amplifier Using Mosfet
HTML-код
- Опубликовано: 20 сен 2018
- Equipment :
1. Sound Speaker
2. Mosfet - IRF Z44N
3. Battery Connector
4. Battery - 9 Volt
5. Capacitor - 100uf/ 16 volt
6. Resistor - 10 k ohm
7. Audio Jack And Socket - Хобби
i love the way you have listed all the items needed that good of you keep it up
Glad you liked it!!
I tried a 4n60 MOSFET without a resistor and it works really well with any capacitor, 2 components are all i need.
congratulations
Excellent. It worked extremely well. It sounds great
thanks a lot,
This Worked! Thank you so much! How do I now add a potentiometer and boost the volume?
Glad it helped!
Worked circuit.. Thanks a lot
Agar 5 volt se chalana hai to kon sa component change hoga ?
lovely autumn leaves why dont you try put leaves on there
I'll use this to enhance the audio coming out my computer to a TIP41c led strip I did... I'll do 2 of this!! :P
Really nice idea. Wow that really work. I made it and connect with car speakers. Thank you for this. Its so useful
congratulation, dear
i prefer to add 100nF capacitor to negative and positive speaker wire to get more clear voice
It's better with a TDA2030,but it requires another circuit but this is good too if you don't have the components
Is that battery chargeable and how long does tht plays song
Do you have a 5v version
Can it use ccokj mofset and 10 uf 50 v
What is the output watt of this amp?
Jo capcitor h wo mosfet me + ya -me jodna a
Can i use any mosfet? I only have access to broken tv and junk to scavenge for components and im new to this
You can use any N-chanel mosfer
I made it but it's quiet. Used a bd 434 mosfet
NICE BRO.GOOD WORK BRO 📣📣📣📣📣📢📢📢📢📢📢🔊🔊🔊🔊🔊🔊🔊🎵🎶
very clear
I DID WELL BUT SPEAKERS GIVE CLEAN SOUND BUT AD UP A CRACKINGs TOO SOME TIMES ITS LIKE MY SPEAKER AT THE PEAK OF THE VOLUME BUT ITS NOT EVEN HALF WAY ....... WHATS WRONG WITH IT ???? EQUALIZER DIDNT HELP AT ALL
भाई और बताओ कौन-कौन से हॉस्पेट लगा सकते हैं हमारे पास है इसी नंबर को मॉसफेट नहीं है अलग-अलग रेट बताओ
It would be helpful if the video would include a screen of the parts list
thanks for your compliment.
you also can check the description area of this vidoe
My speaker is giving low sound
How is the electrolytic capacitor not dying? The audio jack is AC and not DC
audio jack is DC
@@CreativeWorldPro wrong, the signal coming from your smartphone or every audio signal is ac (alternating current)
If you don't believe me, analyse the signal that's coming from your audio jack with an oscilloscope
Sir ji bahut kam sound me bajta hai
😍😍
Excellent project
Kitne volt ki bettry lagegi yeh to btaya hi nhi apne please ...
Sir audio jack and socket kaha milega sir please telllll plzzz
electronics shop per milaga,
BUGAGAGAGAGAGA HOW MANY HANDS THERE BUGAGAGAGAGA SHIVA CAME OUT OF THE STAR GATEs AGAIN BUGAGAGAGAGAGA
Ah yes, the Sourch of a MOSFET
Усилить на динамик по мочнее как заделать
Ostat ji amar akta 2 volume er peavey 4080 power amplifier er ak side sound kom ase oita ajke khule ami main transistor gula multimeter diye porikkha korchi valo ache sob gulai kintu sound kom asche keno ami akhono bujtasi nah ki vabe oita ke thik korbo aktu Jodi bolten amai
capacitor check koren
Okzzz ostat 😊
ca i use mospec s10c40c for it?
No, You can't use
It draws huge amount of current😐😐😐 it's a bit dangerous on the Aux phone socket. It could damage the phone since I could feel the current when I touch the aux socket with my fingers.
karoke bugis tamu tenri undang
30 minutos dura una batería de 9v
Consume demasiado con el MOSFET!!
Resistor kha kha se pa skte h
Tell budget
Which transistor u use pnp or npn transistor?
is is a mosfet- IRF Z44N
can i use any mosfet
Well I tried it . It's working.
Can u please send me the calculation for base, collector n emitter current
yes
@@CreativeWorldPro can u please tell me how to calculate the frequency for this amplifier
Where can we get the mosfeet
@SPEAKER GUY every electronic store , even in less devloped places there is one
Its working
thanks
I tried it sourch blow up 😭😭😭
DO YOU NEED A HEAT SINK FOR THE MOSFET ?
you can use heat sink
@@CreativeWorldPro you must use heat sink because if the heat has no way to go it will burn the transistor it will also sound more clear when the heat has a place to go a cool off
I used 5v(usb) but the sound was more clear and better
will this work with 12V
yes
Can i use utc 2N60L
no
@@CreativeWorldPro Ok thanks for reply
413 मोसपेट से कोई भी स्पीकर चलाओ
Bro tell me about speaker range
maximum 20 watts
I made it. it was working
congratulation,, thanks for trying
Sir sound Nani baj raha hi
check all connection
Baei thoda bajta hae
Wtf 3 hands🤣2:09
nice bro
Sir Why Doesn't Work
check parts
Mera banaya hua bahut tez chal rha tha aap se bhi tez
congratulation
Thanks sir
Low power sound
yeah
Amplifier is not working
check all connection and all your electronics component that you are using
@@CreativeWorldPro I DID WELL BUT SPEAKERS GIVE CLEAN SOUND BUT AD UP A CRACKINGs TOO SOME TIMES ITS LIKE MY SPEAKER AT THE PEAK OF THE VOLUME BUT ITS NOT EVEN HALF WAY ....... WHATS WRONG WITH IT ???? EQUALIZER DIDNT HELP AT ALL
thanks you bhiya
most welcome,,vai
Very good
Nice
where is,,clear,, ?
من درست کردم صدا نداشت
nice
دورغه
Bro can I use 8 ohm Speaker
jaba
This is not working.
check all connection
Not working
please check the connection
Sorry it's working. But the MOSFET will heatup very fast, does the MOSFET damage due to heat?
you should use Heat Sink With mosfet
FAti aavaj hai
Shit,max-0,3w...
Өтірік шықпайды дауыс жәй шығады
Trash :E
Fack vidio math choro
Fake video