Это видео недоступно.
Сожалеем об этом.
How to use 9005/HB3 with 9006/HB4 bulbs and vice versa?
HTML-код
- Опубликовано: 21 апр 2021
- How to use 9005/HB3 with 9006/HB4 bulbs and vice versa?
Specifications
Halogen 9005/Hb3 -65w -12v, can be used on headlight (high beam or low beam) and foglight.
Halogen 9006/Hb4 -55w - 12v, can be used on headlight (high beam or low beam) and foglight.
This video was made is to make known to those who had bought the wrong bulbs can modify it and using it without wastage. This mistake are very common to what we have experienced in the passed years. These bulbs are seen very similar and mistake easily occurs.
Usage of these 2 bulbs depends on your car manufacturers. Although 9005/Hb3 is higher in wattage than 9006/Hb4. It is only 10 watts different and will not significantly affect your vehicle headlight ( high beam or low beam) or foglight component. But if you use 9006/Hb4 from 9005/Hb3, it will affect the brightness you usually see because the increased in 10 watts make the light shines brighter. So if you always find that your road is not bright enough you can either switch to a better bulbs or do this modification to upgrade your vehicle. Vice versa, for those who are looking to lowering their wattage and not particular about the brightness, you can change to 9006/Hb4.
A gentle reminder on these bulbs manufactured nowadays. Most correct 9006/Hb4 bulbs does have a black top coating and the 9005/Hb3 does not. The coating on top of the 9006/Hb4 is to keep the light from blinding the oncoming traffic. So keep a look out if yours is manufactured with the coating on top or without. Some manufacturer do not follow ECE regulations or DOT approved
We hope this video are helpful to you and if you like it please click the thumbs up button and subscribe to our channel. Thank you very much for watching.
If you find this video is helpful, please like and subscribe to our channel and you can click on the links below for more information on our product purchase. Thank you.
/ alvin.boxer593.nos
Https://carousell.com/boxer593
www.shopee.sg/boxer593
Https://www.lazada.sg/shop/boxer593
/ boxer593
/ boxer593_nos_alvin
/ alvin_boxer593
Precisei entrar em um vídeo gringo pra poder saber as diferenças!
Muito obrigado!
There is a difference in the base diameter where the oring is located.
THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU THANK YOU VERY MUCH YOU ARE VERY ACCURATE PERSON :)
You're welcome
Thank you 👍
U are very welcome
The HB4 bulb base diameter is 22 mm and the HB3 is 20 mm. You may modify the HB3 bulb to fit the HB4 socket but not vice versa. Note that the modified HB3 bulb wont be sealed in the HB4 socket.
What we mentioned here was vice versa that can fit into the socket. Although hb3 is 20mm and is smaller to fit into hb4 which is 22mm. You still have to twist the bulb into the socket that tightly securing it.
Isso mesmo. Muito bom
Ths wht i looking for nice one
That's great that this video is of help to you.
Cool video, 🎵🎶🎼 lol
Thank you very much 😉
Can it be a problem if I use hb3 instead of hb4 for the fog projectors? can I burn something in the electrical installation? Thank you !!!🎉
In electronic myb bot , but your reflection housing myb have a problem if you got to high from standard use
There will not cause any problem as the wattage has a different of only 15 watts and the voltage are the same.
I i convert the two of them will the 9006 fit to the 9005 housing and the 9005 to 9006 both fit?
Yes, if you follow our steps. Vice versa will fits in.
Thank you
You are very welcome.
¿ Son iguales las polaridades ?
Yes , the polarity is the same.
👏🏻👏🏻👏🏻👏🏻
The base of the 9006 is longer then the 9005. Will not lock into my 9005 socket.
The base length measurement is the same.
@@boxer593 9006 base is larger