Commodore Pi 1541 + Epyx Fastload Cartridge - Everything You need to get started.

Thanks to pcbway.com for sponsoring this video and thanks to C64iSTANBUL for the design.
You can get this project at www.pcbway.com...
All the ROM images: archive.org/do...
Working Pi SD Files: www.load64.com/...
XGecu T48 EPROM Programmer/Chip Tester
amzn.to/3qbPUCm
My Preferred Soldering Irons
Budget - amzn.to/3g6FGy8
Pricier - amzn.to/3GdT523
Auto Shutdown Timer
amzn.to/3X3Zenu
Fume Extractor
amzn.to/3hFtzIH
Solder Reel Stand
amzn.to/3tvy1MU
3d Print one www.thingivers...
Digital Microscope
amzn.to/3E83LMT
or
amzn.to/3TA0ewr
Magnifying Headset
amzn.to/3WZiClx
Chip Quik Flux Pen
amzn.to/3GgCqux
US Forge Liquid Flux
amzn.to/3UXSaXs
Needle Nose Bottles
amzn.to/3EvRXW1
Soldering Mat
amzn.to/3O5so1c
5 Pack Flush Cutters
amzn.to/3UHC8kT
Eclipse CP-301G Wire Strippers
amzn.to/3Tw3oBD
Soldering PCB Holder
amzn.to/3UAw0e5
Brass Solder Tip Cleaner
amzn.to/3EyUq2k
Mechanic Soldering Tip Refresher
amzn.to/3AgYsK2
Mini Heat Gun
amzn.to/3Ag7A1u
Soldering Wire Holder
amzn.to/3EGpltD
3d Print one www.thingivers...
Soldering Tweezers
amzn.to/3tsKcdt
Desoldering Iron
Hakko amzn.to/3EaQIuf
Budget amzn.to/3X43jYQ
Solder Suckers
amzn.to/3Ebhum6
Desoldering Wick
amzn.to/3hw4JuH
Solder Temperature Tester
amzn.to/3O8kunL

[@anon_y_mousse]

I didn't even know they made Ghosts and Goblins for the C64. I'm intrigued and would like to see more.

[@tripplegracing8276]

I need to get a PCB or 2 done with PCN Way, one for the race dash and one for the ECU (break out adapter) Always great to see these retro pcb vids

[@AnotherMaker]

This is such a fun project. Love the new logo too.

[@tripplegracing8276]

@@AnotherMaker Thanks yeah a whole lot of new start at the moment

[@Zhixalom]

That's the IEC Serial port, not the User-port. The User-port is the wide one on the far left on the C64. The one which was usually used for Modems back in the days, or WiFi modems nowadays. I am sure you already know this and are just brain farting all over the place. But there are newer generations of C64 users out there, who are confused enough as it is with these old relics.
- Yeah, and by that, I guess I mean both us and the C64s 😅

[@Evilslayer73]

thanks a lot for sharing this i have the same pi1541 cart!:)

[@C64istanbul]

Thank you very much. 🙏

[@Goshx7]

I've completed the device, it works fine. However, I'm not sure how to connect the pins of the JST connector to the DIN6. In my case, pin 1 is black, and I soldered it to the first left pin of the DIN (when viewed from the soldering side). The cable (red) from pin 2 of the JST, I soldered to the next DIN pin, and so on until pin 6 (green), which I soldered to the central pin of the DIN connector. Unfortunately, the C64 cannot recognize the connected device, so I suspect there might be something wrong with my soldering scheme. Can anyone advise me on this?

[@Raptor50aus]

Will this load games with more than 1 x D64 file like Fighter Bomber? If so how do I select the next disc when prompted? thanks

[@JoeSchmoe-c3g]

Anyone have a link to the correct SD card files for the Pi Zero to work with this project?

[@generaldisarray]

Nice!!

[@AnotherMaker]

Thanks. I've been using it for a little bit now and enjoy it.