Of course, but for what information? Check resistance of coil ? That will not help at all. Only disassemble and visual checks will answer about it condition.
@@OlegPC i have one delonghi esam 3000 infuser stucked in up position. Turn machine on red lights blinked one by one, i manualy turns pulley to get down the infuser and take it out, cleaned it but machine says same error. No any sounds.. bord is ok visualy nothing melty. I suspect on pump.. machine is really dead what i put voltage on it just 4 lights flashing. Did u have any idea what cen be. Ty
@@BOJANBAJALICA To resolve this problem - we need complex of actions : (1) reset eeprom memory on main board (2) refurbished top piston assembly (3) Disassemble brew unit, clean it, change gaskets, put new grease (4) Refurbish main shaft and change brass nut, that moves brew unit holder inside machine.
@@BOJANBAJALICA You can buy a Chinese programmer PicKit 3.5 on Ali. It costs around 10 dollars. Plus you need to google how to solder wires from Programmer to Mainboard (simple and fast action if your machine with modern plate (from 2008) - just 5 wires)
ah thank you. this really helped me.
I purchased a repair kit, and now the pump from 1996 is functioning as if it's brand new.
Nice))) Restoring classic things - it’s really popular theme
Can I check a pump with multimeter when take it out of machine?
Of course, but for what information? Check resistance of coil ? That will not help at all. Only disassemble and visual checks will answer about it condition.
@@OlegPC i have one delonghi esam 3000 infuser stucked in up position. Turn machine on red lights blinked one by one, i manualy turns pulley to get down the infuser and take it out, cleaned it but machine says same error. No any sounds.. bord is ok visualy nothing melty.
I suspect on pump.. machine is really dead what i put voltage on it just 4 lights flashing. Did u have any idea what cen be. Ty
@@BOJANBAJALICA To resolve this problem - we need complex of actions : (1) reset eeprom memory on main board (2) refurbished top piston assembly (3) Disassemble brew unit, clean it, change gaskets, put new grease (4) Refurbish main shaft and change brass nut, that moves brew unit holder inside machine.
@@OlegPCty.
How can i do that eeprom reset?
Need to unsolder some chip from mainborad and prigramming it somehow
@@BOJANBAJALICA You can buy a Chinese programmer PicKit 3.5 on Ali. It costs around 10 dollars. Plus you need to google how to solder wires from Programmer to Mainboard (simple and fast action if your machine with modern plate (from 2008) - just 5 wires)