Fisker Ocean One - Cabin Fuse Box & Tbox Reset
HTML-код
- Опубликовано: 9 июн 2024
- Today I will show how to access the cabin fuse box near the steering wheel and how to reset the Tbox.
Thanks to Chad Sturgill of the FB Fisker Ocean Hacks & Mods Group for the suggestion to use the fuse bypass switch/extender.
Thanks to Majd J. Srour of the FB Fisker Ocean Hacks & Mods Group for the location of the switch!
► TIMESTAMPS
0:00 Intro
0:43 Cabin Fuse Box
1:27 Switch/Extender
2:40 Tools Needed
3:50 Remove Trim Panels
8:33 Cabin Fuse Box / Pull Out RF22 Fuse
10:20 Turn On Car / Reboot Infotainment / Test
10:51 RF55 Fuse
11:20 Route Switch Wiring
13:59 Put Everything Back Together
17:45 Test Drive
19:00 Conclusion
► LINKS
Trim Tool / Plastic Pry Bar
amzn.to/44gbDZx (Paid Link *)
amzn.to/49Vo1z5 (Paid Link *)
amzn.to/3xT80wz (Paid Link *)
T20 Torx Screwdriver
amzn.to/3Qn8Qrs (Paid Link *)
amzn.to/4aWgeme (Paid Link *)
amzn.to/3Qm3BZa (Paid Link *)
Fuse Bypass Switch/Extender 23.62" / 60cm
amzn.to/3wmNovY (Paid Link *)
11.81" / 30 cm Version
amzn.to/3Qm5up0 (Paid Link *)
Mini Fuse Puller
amzn.to/3QiKGyz (Paid Link *)
amzn.to/3JXXVRP (Paid Link *)
Mini/Micro/Standard Fuses (Spares, not needed for this project)
amzn.to/3UyBjx4 (Paid Link *)
► MERCH STORE
mtnranger.creator-spring.com/
► DISCLAIMER
I purchased this item myself and was not compensated for this video.
*As an Amazon Associate I earn from qualifying purchases.
#fiskerocean
100% - Авто/Мото
Absolutely brilliant. HUGE thanks. Hasn't happened to me yet but now I know. Anyone doing this, PLEASE be careful. If you do something wrong and Fisker support is no longer available you might end up with something worse than a stuck Nav screen. So, BE CAREFUL. I have some something fairly similar in disassembly and reassemble with my 92 BMW 850i where I had to take out the general control module and switch out capacitors. So, that was more complicated but the disassembly and assembly was pretty similar, removing panels under the steering wheel. I took my time making a 2 hr job a 5-6 hrs job taking breaks in between to breath and slow down to be patient. NICE video.
Yes, patience and carefulness is the key!
Great video. I just did this reset a few days ago because my cell service stopped working, pulling the fuse for a minute has fixed it so far. Wish I had your video, it would have made it a ton easier!!
One addition that I did notice, and maybe you did this and we couldn't see it, is when putting the lower cover back on by the pedals, there is a metal mount or tab near towards the front of the vehicle that that lower cover latches into, it seems to keep the cover raised higher and better fitting around the floor vents.
Thanks again, Great stuff!!!
Yes, when it pushed it towards the front and up, it seems to latch into it. If you don't do that, it falls down in the front by an inch or so.
Thank you again for leading the way on all of these maintenance and repair tutorials!
Thank you!
I'm not much of a handy person, do you think it would be easier to unplug the battery under the hood? or any other way to cut power to reset?
@@MTNRanger
@@krafter324 That will possibly fix the issue, but then you lose your doggie windows that will require an in-person service tech calibration. Once the switch is installed, it's much easier than any alternative.
@@MTNRanger oh good to know. Won’t do that!
There are opportunities for Ocean Technicians to solve and repair the problems as you have been doing. Thank you for your help.
Excellent! Thank you so much for posting.
U are awesome! Waiting for ur air vent changing tutorial video!
Cabin air filter? Yes, when a filter becomes available, I'll do a video for it.
OMG, thank you! I am going to try this. Mine hasnt' worked in months. Same with the communication on service orders lol.
Thanks for sharing
my goodness, so much for a readily avail fuse box like they used to have.
At least the other three are easier to get to.
Brilliant… thanks you so much for posting those educational videos. I guess if fisker goes under (maybe the question is not if, it’s when), you are going to be the go to guru :)… I’ve been experiencing issues with my ICC for the last few weeks, it would go black while driving, could not access anything, including AC, soft reboot did not work. The moment I stops it would go back! A technician came over and did hard reboot by disconnecting the 12V battery, one week later the ICC went completely down!!! I put another ticket, and now it’s been a week no one has called! Do you think this something has to do with the fuse box?
Thanks! With that description, I think you may need the ICC module replaced. I would check to see if a fuse is blown. Check out the Facebook "Fisker Ocean Maintenance and Tips" group, lots of good stuff in there. We already have a service manual available to download.
Great job
Thanks for this informative video. Looks like we need more of these to be able fix our wonderful vehicles our selves from the look of things.
Any suggestions on how to fix the cameras/blind spot lights permanently on issue? Can it be fixed with changing fuses?
Other question is if Ocean can work with Ottocast P3 OttoAIBox CarPlay Ai Media adaptor?
The cameras and blind spot detection issues are bugs that needed be addressed in software. Resetting fuses will not help that issue. No, an Ottocast P3 (or other device) will not work with the Ocean.
Very helpful to the community. Are there any NON Facebook sites we should be aware of?
Since Fiskerati closed, the only other one I know of is Oceanforums.com. However, there is no centralized help section and until recently was a toxic site.
Hi MTNranger, do you think it would be ok to not put back the first screw that you removed in the video or do you think the panel will fall off? It seems that the clips and the bottom screws were able to keep the plastic panel in place.
The side screw probably could be left off. For future access, this would save time.
Great video. May be you can help. My Dcc fast charger won’t work. It tries to connect to vehicle and then end up with “charging start error”. Do you know what fuse I could try to may be reset it! ? Thanks
Have you tried different CCS station? Some are not compatible (or giving issues) such as the EVgo 100kW stations. I'm not aware of which particular fuse controls charging.
@@MTNRanger thanks. Yea. Tried many different brands and locations too
@@sripavanv If that's the case, you definitely need Fisker service to look at it and see if there is a hardware problem.
I guess I have been lucky with my FOO in that I have not had a problem with the navigation location being stuck.
I do have the issue with Navigation updates not working, and the maps showing as 19 months old. I reached out to Tomtom and was told that they update the maps every 3 months. Lastly, for my navigation it shows states that I have never driven to as being "Region in Use". On my car it shows the state of Washington in Use and my car has not left California. I really hope that the Fisker 3.0 update includes working updates to the Fisker Ocean Navigation maps.
The maps download has never worked on the Ocean. They appear to download but never install and error out. The points of interest are very poor in the navigation. I search for local destinations and it sometimes points to something 500 miles away when I know there is one 5 miles away. Very odd.
How are you interior LEDs colored?
ruclips.net/video/RLG2Pmi0uok/видео.html
MTN Ranger, My Center Infotainment Screen is inoperable - When starting up the FOO the OCEAN script and FISKER Logo appears, then the screen goes blank. Unfortunately, this TBox fix does not reset the main screen. Any ideas on which fuse this could be? Thanks for a great video here about reset of GPS and Navigation.
Sorry to hear about that. Did you get a vent replacement recently?
Do you know which fuse to check for by any chance or I'll need to do a process of elimination
There are fuse box diagrams and legends in the owners manual. I found the two fuses marked TBOX and started from there.
@@MTNRanger I found it. Thank you. You are a great asset to our group. Continued success to you.
Thanks. It is really sad that we paid $50k plus for a car that we need to do this to in order to work.
Did you end up using the 30cm or 60cm bypass switch?
In the video I used the 60cm version. You really just need 30cm, but it was out of stock when I was planning the video.
Thanks!
My car is on 2.0 and Fisker replaced ADAS module to make cameras work but it has made lane keep assist and blind spot monitoring unavailable. Do you have any tricks or suggestions to get them working?
You got me on that one. I think the tech should have calibrated/updated all the modules when replacing the ADAS module. I'm not sure I can suggest anything on that, sorry. Are they totally not available or do them come and go?
@@MTNRanger thanks for the response. Unfortunately those 2 items are completely unavailable. It was becoming impossible to drive with notifications switching between blind spot monitoring unavailable and lane keep assist unavailable. So I had to set them to disabled. Even after doing that I get a reminder on each drive that both of those functions are unavailable. I wish Fisker was in better shape to help me by sending a tech to troubleshoot it further. I have now given up hope on getting it working.
Thanks for sharing. Awesome job. You are not even wearing glasses.
@@chealay7251 I need them for distance.
Does that work for resetting the wifi connection
Yes, I think the WiFi goes through the Tbox.
Hello,
Thank you very much for the great video.
I am from Germany and have had my Fisker Ocean Extreme since December 2023.
There is no longer any support in Germany.
After Update 2.0 I have no longer a connection to the apps and the internet. Date, navigation and updates are no longer possible.
I tried to reboot the car using the main-switch near the battery. But that didn't work.
Do you think I can reactivate the navigation system and the internet connection by using your suggested method?
I would be very happy about a short answer.
Thank you and greetings Germany
Yes, it most likely sounds like you need a Tbox reset using this method.
@@MTNRanger
Thank you for your quick answer!
I'll try it tomorrow morning and I'll give you feedback.
Do you think I should remove both fuses at the same time or only one at a time andd step by step?
And you also think waiting for 1 minute might be enough?
I often read in German forums, that you should wait 10-30 minutes for other systems to restart.
Many greetings from Germany.
@@joergebenhoch You could remove both, but try RF22 first. Everything I have seen only requires about a minute before reinserting. It would not hurt to wait longer if you wish. In any case, I would do a infotainment reboot after you reinsert the fuse.
@@MTNRanger
Thank you :-) Is it sufficient if the Fisker is opened with the key or NFC? I don't have to press the brake pedal either? By restarting the infotainment you mean that I hold the two inner buttons on the steering wheel for 15 seconds?
@@joergebenhoch Opening method does not matter. You press the brake pedal to wake the car up or put it in ready mode. Yes, pressing the two inner buttons on the steering wheel.
Thanks for the video. I hope I never have to do this. Seems way complicated to access a fuse panel.
Yes, the other fuse boxes are easy. This one was almost intentionally designed to be hard to access.
Major design flaw having to do all this to access the fuse box. 😢
If you can do this, you can probably help with this?
You'll be my hero if you can figure out how to make the reverse and below 23mph forward speaker sound not as loud or a way to 'legally' shut it off.
Yes, there is a way to disconnect the pedestrian speaker. Thanks for the suggestion. I have not done it yet and I'll put it on my to-do list!
Ok, tonight I tested with the key fob in the console and I got 30 minutes of run time before the outlet turned off. Not quite as good as in the video, but still sufficient many outlet uses. You can press the brake pedal and start another 30 minutes of use.
@@MTNRanger you rock! Thanks. and maybe there's a way to muffle the sound so it's still on, road legal, but not as annoying. Can't tell you how much I appreciate your videos!
My GPS has worked all of 5 minutes since December. This is a lot of work and potential damaging of panels and clips. I may call for a technician instead.
Yes, ideally if you can get service to do it, that would be preferred.
The fact that a fuse reset switch is needed is troublesome. Shouldn't bugs requiring reboot be solved BEFORE mass production.
Yes, ideally that would happen. But we may soon be one our own with regard to keeping the Ocean serviced and maintained.
it's so scary how this car is put together. A fuse box must be easily accessible. It shouldn't be necessary to take the car apart like that. What a piece of shit
yes, both the battery and the fuse box access is really strange considering that everything is electric.