Andre Horvarth, I heard was looking at reproducing them, I haven't noticed them on his site yet and I don't expect they'll be cheap. Maybe email him and register your interest. It can't hurt. www.enduroklassiker.at/en/
Hey man, I used a small wire brush (TIG welding brush) and an acid based aluminium cleaner such as Alubrite. You can dilute as much as you want be adding more more water to the acid. I also used a right angle pneumatic die grinder with 50mm scotchbrite pads.
Hello I am Italian and sorry for my english, I have a KTM 125, 1992 Chesterfield, I wanted to restore it, but I can not find the graphics, I could explain where you found them? Or give me a link thanks hello
95icoc Graphics were sourced from www.stormgrafix.co.uk/evo-graphics/ktm-evo-graphics/. The guy's name is Steve, he may have patterns for the '92 radiator shrouds, Otherwise Frank at www.evo-mx.com/mall/departmentpage.cfm/EvoMx/_487336/1 will be able to help you, just email him. Good luck with the resto, make sure you post some videos of the build. Cheers Matt
hi, is it andre hovarth that only supplies parts for these now,i saw the price of a piston from him,i had to sit down for a while,talk t a few people about cr conrod and piston conversion ,seems like a load of arsing about,my 500 has been in shed for over 3 yrs
The majority of my parts came from Andre but some of the older local KTM dealers still have stock on the shelf, you've just got to keep ringing around with the required part numbers and you can get lucky. The only thing with Andre was postage to Australia is 24 EURO flat rate no matter how much you buy, so you need to make each purchase worthwhile otherwise shipping starts to add up! I looked at doing the CR rod conversion but with OEM KTM rods still available, albeit expensive, I figured that's a mod I will do when absolutely necessary.
Nice work dude, I have one of those gathering dust in storage - not ridden since 1995, would be good to resuscitate it like this :P What´s the music btw? Cultish :)
Mate, sounds like you have a project ahead of you that will only appreciate with time, hook into it and post the results! Music is by Danzig, very cultish!
I will, I will.... someday... got a few other projects lined up first though...! In the middle of a 1997 900SS teardown & rebuild, then a 1997 Mini to retrograde into a cool Mk1 lookalike, then I´ll look at the KTM :)
Hey mate, I just always wanted the challenge of making one to give it the 'works' look. Besides the standard white KTM tanks brown off really bad with fuel vapours and repro ones aren't available. Very common with vintage KTM's.
Music selection was on point.
Wow, nothing spared. Amazing results. The hand built aluminum tank blows me away, as do many of the other pieces.
That seat and tank. 👏🏻
Beautiful bike.
I had a 1990 MX500. Closest thing to an automatic holeshot machine that I ever saw.
Amazing. I am currently rebuilding a 1987 KTM250 EXC, but it will not be a masterpiece like your bike. Awe inspiring.
Trampas Parker, now there's a blast from the past,boy done good tho. Great rebuild BTW
The work on that Tank is amazing! Great job on that beast!
Great Job- You are a 1st Class Sheet Metal Worker- The Tank is Magic! -Cheers😉👍🍺🍻
Awesome bike, love Danzig too
Beautiful.awesome build.seeing this animal makes me wanna get mi 525 n just wheeeeelie up n down
Great video!!!
& you got the music 🎶
RIGHT!!!
WOW! I have ktm gs 1988, but ignition and carburb problems....
complimenti....veramente bella...Great Job
Perfect bike
Ho visto "FARIOLI".
È in bergamasca questo KAPPA?
è una favola!!!
We’re tf do you get parts I can’t find any
Masterpiece!
Che costo ha per fare un serbatoio ktm 250 1992
beautiful!!!!!!!
Where did you find parts for your bike?
i need a 1987 ktm 500 mx clutch cover!! looking to by one
Andre Horvarth, I heard was looking at reproducing them, I haven't noticed them on his site yet and I don't expect they'll be cheap. Maybe email him and register your interest. It can't hurt.
www.enduroklassiker.at/en/
danzig. hell yea
Hi, can I ask for courtesy what procedure and products have you followed to polish the engine aluminum? Thank you!
Hey man, I used a small wire brush (TIG welding brush) and an acid based aluminium cleaner such as Alubrite. You can dilute as much as you want be adding more more water to the acid. I also used a right angle pneumatic die grinder with 50mm scotchbrite pads.
Hello I am Italian and sorry for my english, I have a KTM 125, 1992 Chesterfield, I wanted to restore it, but I can not find the graphics, I could explain where you found them? Or give me a link thanks hello
95icoc Graphics were sourced from www.stormgrafix.co.uk/evo-graphics/ktm-evo-graphics/. The guy's name is Steve, he may have patterns for the '92 radiator shrouds, Otherwise Frank at www.evo-mx.com/mall/departmentpage.cfm/EvoMx/_487336/1 will be able to help you, just email him.
Good luck with the resto, make sure you post some videos of the build.
Cheers Matt
hi, is it andre hovarth that only supplies parts for these now,i saw the price of a piston from him,i had to sit down for a while,talk t a few people about cr conrod and piston conversion ,seems like a load of arsing about,my 500 has been in shed for over 3 yrs
The majority of my parts came from Andre but some of the older local KTM dealers still have stock on the shelf, you've just got to keep ringing around with the required part numbers and you can get lucky. The only thing with Andre was postage to Australia is 24 EURO flat rate no matter how much you buy, so you need to make each purchase worthwhile otherwise shipping starts to add up! I looked at doing the CR rod conversion but with OEM KTM rods still available, albeit expensive, I figured that's a mod I will do when absolutely necessary.
cheers
tubeyou123863 do you have an ebay store im looking to restore a 91 Ktm 250sx
i need parts for mine where did you get yours at
Nice work dude, I have one of those gathering dust in storage - not ridden since 1995, would be good to resuscitate it like this :P
What´s the music btw? Cultish :)
Mate, sounds like you have a project ahead of you that will only appreciate with time, hook into it and post the results! Music is by Danzig, very cultish!
I will, I will.... someday... got a few other projects lined up first though...! In the middle of a 1997 900SS teardown & rebuild, then a 1997 Mini to retrograde into a cool Mk1 lookalike, then I´ll look at the KTM :)
Wow!
hell yea danzig and bad ass bikes u wanna sell it
Nice tank! what's the benefits of it being aluminum though?
Hey mate, I just always wanted the challenge of making one to give it the 'works' look. Besides the standard white KTM tanks brown off really bad with fuel vapours and repro ones aren't available. Very common with vintage KTM's.
ranrovmat right on well your tank looks really good! :)
ranrovmat I want to buy this bike
Hey! Where did you get parts from?
Andre Horvath Enduro Klassiker as well as constant scouring of eBay. A few local KTM dealers that have been around since the nineties.
@@ranrovmat need more info
REALLY great work - and shitty music :-)