Answered my questions, thanks. I've been looking into using PMMA for other applications but wasn't sure what to expect. I'm used to platinum silicone and plaster, so this should be fun.
thanks pare, gagawa rin ako ng partial denture ko... mahal kasi dito sa ibang bansa. meron na ako nakuha sa ebay nang self cure acrylic. dati kasi pinadadala ko lang ang mould sa pinas at pinagagawa sa mga gaya nyo kasi mura naman. kaso ngayon covid eh ako na mismo gagawa. mabuti detalye pagka video mo more power.
@ Vineel Chaitanya : Hi Sir, Synthetic Heat Cure Acrylic Resins lo, After pouring Upper Flask , Separating Medium or Vaseline be applied before pouring lower flask . Cast also be coated with Separating Medium inorder to separate the Stone pouring from the flask after the Cure. what is this Separating Medium ? or What is this Vaseline here ? what is meant by Raja Bhogam? What is meant by Raja Yogam ? - Thankyou.
I gave up waiting so did the same made my own cost me £50 from eBay Cold cure pink powder and liquid the mould holder mixed the 2 parts together which was blue and took moulds from top and bottom gums Iv no teeth was all removed after an accident stone cast with Vasoline ready for my base mixed the cold cure together paint bit of the liquid around the stone cast then roll my mix and lay down over the cast be Quick it get hard fast Just get the shape right then add your band of teeth the set you get that has wire around them so set in the right place just bend and level it out Then push gently into your pink mould in the right place then use the liquid with paint brush to wet around the bottom area where teeth meet the pink stuff shape and add more to make look like real teeth and gums I got a nail set kit to help flatten out gum lines move into gaps and hide the metal wire try trim off any over lay on the stone cast wait till hard then gently pull off the cast the Vasoline would help here use a dremil and sand paper to smooth out and bits keep test fitting cut as much off as possible so not to dig into your gums. Thin out the roof to help not to gagging. Wet sand till smooth after few days wearing them you’ll find bits that dig in your gums so keep sanding till your happy Use the paste to hold them in place and then it’s learning to talk again lol. I made 3 lots till I got mine right and can still make more all for £50
![Yeat & Quavo - 5BRAZY [Official Music Video]](http://i.ytimg.com/vi/4XxnTAwyxus/mqdefault.jpg)
Answered my questions, thanks. I've been looking into using PMMA for other applications but wasn't sure what to expect. I'm used to platinum silicone and plaster, so this should be fun.
As a 20 year technician I can say you did very well. With some better equipment for trimming you'd be set.
Thank you. 🙏
Reminded me of college days final year dentures making same procedure
thanks pare, gagawa rin ako ng partial denture ko... mahal kasi dito sa ibang bansa. meron na ako nakuha sa ebay nang self cure acrylic. dati kasi pinadadala ko lang ang mould sa pinas at pinagagawa sa mga gaya nyo kasi mura naman. kaso ngayon covid eh ako na mismo gagawa. mabuti detalye pagka video mo more power.
This is really amazing! Thank you for doing this!
Thanks ❤ All my questions were answered here so well.
nice work! ❤️
Thank you for the video!Awesome🦋
Well made, doc!
Wow Ang ganda Naman more vids pa po
just wondering why not use cold cure acrylic ?
Amazing video! More pls
@ Vineel Chaitanya : Hi Sir, Synthetic Heat Cure Acrylic Resins lo, After pouring Upper Flask , Separating Medium or Vaseline be applied before pouring lower flask . Cast also be coated with Separating Medium inorder to separate the Stone pouring from the flask after the Cure. what is this Separating Medium ? or What is this Vaseline here ? what is meant by Raja Bhogam? What is meant by Raja Yogam ? - Thankyou.
what material are you using bro? vertex, hillon, huge, mr.cure or what? and what is the material code
Can u make video processing it with pontics
What is the name of the acrylic powder? Bms dental?
تسلم
I gave up waiting so did the same made my own cost me £50 from eBay
Cold cure pink powder and liquid the mould holder mixed the 2 parts together which was blue and took moulds from top and bottom gums Iv no teeth was all removed after an accident stone cast with Vasoline ready for my base mixed the cold cure together paint bit of the liquid around the stone cast then roll my mix and lay down over the cast be Quick it get hard fast Just get the shape right then add your band of teeth the set you get that has wire around them so set in the right place just bend and level it out Then push gently into your pink mould in the right place then use the liquid with paint brush to wet around the bottom area where teeth meet the pink stuff shape and add more to make look like real teeth and gums I got a nail set kit to help flatten out gum lines move into gaps and hide the metal wire try trim off any over lay on the stone cast wait till hard then gently pull off the cast the Vasoline would help here use a dremil and sand paper to smooth out and bits keep test fitting cut as much off as possible so not to dig into your gums. Thin out the roof to help not to gagging. Wet sand till smooth after few days wearing them you’ll find bits that dig in your gums so keep sanding till your happy Use the paste to hold them in place and then it’s learning to talk again lol. I made 3 lots till I got mine right and can still make more all for £50
MORE VIDEOS KUYA❤️ THANK YOU ❤️
Galing !
Thank you. 🙏
amazing 👏👏
Tristan Canda
Very true
Thank you sooooo much 🙏🙏🙏🙏
Amazing 😍
Hi can i ask is there a odorless version of the polymer liquid
None that I know of. All polymer liquid are smelly. ☺️
nice nice nice
😮😮
amazing
🤩🤩🤩
🤩🤩
Doc paano maiwasan mag karon ng air bubbles/ pockets.?
wow
Weh? Haha
Ilan ang ratio ng liquid to pwder?
👏🏼👏🏼
kuya salamat dabest ka
You’re welcome. 🙏🙏🙏
👏🏻
😮🤩👏
late oh!
@@hannahbornillo6592 walay wifi 😝
Can I contact you? I would pay you for time. I wana make my own dentures
😊
😱😱
wowowowoww
Present
sure ba?
Aw sure kaayo oy haha
present jud?
Ana si Miguel Toledo ug Marc Meguillo, doc na di daw sila mo tan'aw ani kay kapoy
unsay ako oy hahahah, maski si Kyle Uba to ni ingon
Ana siya daghan na daw kaayo
@@migueltoledo4129 HAHAAHHAHAHAHHAHAHAAHAHAHAHAHAHAHAHHAHAA Myles Sabandal pud daww
Bulgar nuon
😯
😲☺️
☺️😃
😮
🤩🦷
😲
😃
100%
🤩🤩🤩