Polestar 2 Door and Window Removal and Sound Deadening
HTML-код
- Опубликовано: 8 сен 2024
- How to remove the front door and window on a Polestar 2 and sound deadening.
Here are some helpful links:
Siless Hybrid 3-in-1 Deadening
amzn.to/3uAmPmt
Butyl Roller Set:
amzn.to/3wt2rEa
Siless 120 Mil Butyl Deadener
amzn.to/3T9dVFN
This is my Patreon if you would like to support more videos!
www.patreon.co...
I'll tell you what, my friend, I'm a 72-year-old man who has been inside a few car doors in my time and I don't think I've personally ever witnessed one better build than that one... If I hear a slight rattle in my new P2... I'll just turn the radio UP!! ;-)
Are you going to do any thing with the wheel arches?
I followed your videos for front and back seats this weekend, and also dit the trunk.
But the wheels has me at a loss...
Hi, can you make a video of how to replace the polestar sun visor? I have a polestar 2 2021 and need to replace it, I already have the ordered part but no clue how to remove
Thanks for the feedback, I'll look into it!
There's a c-shaped plastic cover over the bolts holding it to the roof. Pop that off, then remove the bolts. There's a plug connecter hidden about 4cm 'into' the ceiling liner..fish around with your finger and pull it out, then just unplug the damaged visor. Plug the new visor in, push the power connecter back into the liner, and just reverse the removal process. It's eash..don't be afraid to pull on teh wires to get to the connector!
Hi Nick,
I just got the polestar 2 single motor long range and realised that the door welcome light is an optional extra (so stupid for such a high cost and they didn't include it).
Are you able to direct me as to where the electrical cable of the door light goes to? There's a hole for my door but I need to see where the cable goes to.
Then I can just buy some lights and install them myself.
More videos about polestar mods would be great.
Thank you again
Thanks for reaching out. It actually splits off from the main wiring harness on the interior door card. You can see the light housing and cable at the 16:00 mark. I'm not certain what the single motor wiring would look like so hard to judge the ease of an install. Best of luck and let me know if it's a success!
Did all this work give a noticeable result?
It definitely is a lot of work. If you're someone who really notices sound changes, then yes. It does make the doors feel more substantial and reduces speaker transmission to the outside world by reducing transmission through the door. However, there is still wind noise from around the door and window, as well as airborne transmission through the tempered glass, this becomes more prominent.